Precision flow meters

... FLUXTRONIC® for FMC/FMJ and FMO filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. There are two operating option. While in "normal mode" only the passed ...

Process pressure: 0 bar - 40 bar
Process temperature: -40 °C - 180 °C

... value (±1 mm/s) it is one of the most accurate electromagnetic flowmeters available in the market. That is why leading metrological institutes use the OPTIFLUX 5300 as their master meter. Thanks to ...

Process pressure: 0 Pa - 10,000,000 Pa
Process temperature: -40 °C - 240 °C

... certification is effected within the scope of a Full Assessment by TÜV Süd. Thereby the OPTISWIRL 4200 can be used for continuous volume flow measurement in safety-related applications with classification SIL2.

Process pressure: 0 psi - 150 psi
Process temperature: 0 °C - 50 °C

... novel and economical alternative to variable area meters (VA meters), also known as purge meters. The rechargeable Battery Pack enables you to take the MASS-VIEW series as a portable ...

Process pressure: 0 psi - 150 psi
Process temperature: 0 °C - 50 °C

... novel and economical alternative to variable area meters (VA meters), also known as purge meters. The rechargeable Battery Pack enables you to take the MASS-VIEW series as a portable ...

Process pressure: 0 bar - 40 bar
Process temperature: -200 °C - 400 °C
Volumetric flow rate: 0.2 m³/h - 32,166 m³/h

... F measuring tube is the first choice in heavy duty applications. The proven and patented capacitive DSC sensor ensures high precision measured values even under the toughest process conditions. Prowirl F 200 offers wetsteam ...

Process pressure: 40 bar
Process temperature: -40 °C - 260 °C
Volumetric flow rate: 0.2 m³/h - 625 m³/h

... Prowirl D measuring tube is a disc/wafer model. The flowmeter is installed between flanges and mainly used for light duty applications. The proven and patented capacitive DSC sensor ensures high precision ...

Process pressure: 10 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 0 l/min - 0.2 l/min

For flow rates up to 200 ml/min Suitable for water and aqueous solutions With volumetric flow quantity, total quantity and temperature indication Fast response time and high response ...

Process temperature: 0 °C - 130 °C
Volumetric flow rate: 0 m³/h - 250 m³/h

The MID series from Arthur Grillo is a magnetic inductiv flowmeter that is especially designed for measuring the flow of liquids that have a conductivity of > 5 S/cm, such as sewage water, drinking water, ...

Process temperature: -200 °C - 600 °C

... harmful spaces. This ATEX certified device is the perfect solution for gas flow calculation in prospective combustible spaces even for a short-term exchange of a stable flow meter, check ...

Process temperature: -40 °C - 600 °C

The FLUXUS F706 combines highest precision with the advantages of non-invasive ultrasonic liquid flow measurement. With its 4 beams, in reflect mode providing 8 paths through the gaseous medium, the ...

Process temperature: -40 °C - 600 °C

... Even low flows down to only a few liters per hour can be recorded accurately. Besides its advanced signal processing and evaluation technology, FLEXIM takes special care within the manufacturing process of the flow ...

Process temperature: -20 °C - 50 °C

... A and B). Here, the signal run time in flow direction t1 is shorter than the signal run time towards the flow direction t2. The difference between both run times is proportional to the average ...

Process pressure: 0 bar - 4 bar
Process temperature: -20 °C - 50 °C

Long-Term Flow Metering with integrated Data Transmission The latest portable measurement system made by NIVUS GmbH operates reliably with minimum maintenance and provides an intuitive operating concept The mobile ...

Process temperature: -40 °C - 150 °C

... signal-tonoise ratio. Precision measurement of flow helps reduce costs and energy consumption. Fluid temperature : -40 to +150 °C Easy-to use Low maintenance : no projection in pipe Applications Ideal ...

Process pressure: 0 bar - 25 bar
Process temperature: -20 °C - 80 °C

Flow metering in dense-stream The measuring system for continuous flow metering in dense-stream conveying and high levels of throughput Reliable flow metering in pneumatic dense-stream Unlimited ...

Process pressure: 0 bar - 25 bar
Process temperature: -20 °C - 500 °C

Continuous flow measurement at low solid/air ratios Measuring powder flows in transport lines with very low material concentrations. In pneumatic applications for material flow ...

Process pressure: 10 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 0.9 l/min - 150 l/min

Flow measurement device using the vortex measurement principle ●High precision ●High stability to excessive flow rates ●No moving parts ●Rapid installation and removal thanks to clamp ...

Process pressure: 10 bar
Process temperature: 0 °C - 60 °C
Volumetric flow rate: 0.9 l/min - 150 l/min

Flow measurement device using the vortex measurement principle ●High precision ●High overload protection ●No moving parts ●Rapid installation and removal thanks to clamp fastening ●Various connections ...

Process pressure: 0 bar - 40 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 0.6 l/h - 282,743 l/h

Compact magnetic inductive flow meter, for pipe widths starting from DN1 / MFI447 Very compact design ● High precision (± 0.5 %) with flow speed > 0.5 m/s (optional ...

Process temperature: 0 °C - 100 °C
Volumetric flow rate: 0.1 m³/h - 1,000 m³/h

... Housing material: Aluminium (AISI304 on request). Programmable functions: low flow rate cut-off, bidirectional, dual range, peak cut-off, empty pipe, alarm limit, batching, low flow rates error curve ...

Process pressure: 10 bar - 40 bar
Process temperature: -20 °C - 150 °C
Volumetric flow rate: 0 l/s - 6,000 l/s

M921 Precision Electromagnetic Flow Meter accurately measures flow of conductive liquids from 5 µS up. As there are no moving parts in the flow profile ...

Process pressure: 0 bar - 690 bar
Process temperature: -200 °C - 1,240 °C

... averaging pitot tube is a cost- and energy efficient flowmeter for gases, liquids and steam. Due to the special probe profile the deltaflow flow measurement can assure the highest level of precision ...

The IP67 battery powered RBmag flowmeters are ideal for remote monitoring applications where there are no external power supplies available. With a sensor pipe in 321 Stainless steel they are suitable for conductive liquids ...

... can support up to 8 PTU, MTU, METER, MTU5 or KTU units if externally powered. The data logger on the removable pen-drive, enables total trace-ability of the measurements. It is particularly suitable for the analysis of ...

Process pressure: 10 bar
Process temperature: 20 °C
Volumetric flow rate: 50 m³/h

MTCMF Coriolis mass flowmeters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, or slurries. MTCMF ...

Process pressure: 2 bar
Process temperature: -40 °C - 80 °C
Volumetric flow rate: 20 l/h - 4,000 l/h

... fuel flow meter is used within stationary object monitoring systems and vehicle telematics (GPS tracking) systems: -Mining and quarrying machines -Railway machines -Watercrafts -Large diesel gensets, ...

Process pressure: 1 bar - 16 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 720 l/h - 25,000 l/h

... Industrial flowmeters includes autonomous counters with electronic display only (LCD) and flow meters with LCD and output interface cable for sending data to recording ...

Process pressure: 1 bar - 16 bar
Process temperature: -20 °C - 60 °C
Volumetric flow rate: 720 l/h - 25,000 l/h

... Industrial flowmeters includes autonomous counters with electronic display only (LCD) and flow meters with LCD and output interface cable for sending data to recording ...

... product, liner is allowed Working Enviroment： Temperature ：Converter : -20 ... 60 ℃ ; Flow Transducer : -30 ... +160 ℃ Humidity ：Converter : 85 %RH ; Flow Transducer : Water depth ≦ 2m

Process temperature: -20 °C - 100 °C

flow and temperature meter for oil-based liquids For restricted access or harsh environmental conditions. Outputs:analogue 0 - 10 V flow and temparature Operating principle: calorimetric ...

Process pressure: 0 bar - 1 bar
Process temperature: -20 °C - 70 °C

For air and gaseous media, solid state design suitable for 1 1/2" and above pipe installations 3202.30/xx: current output (4-20mA) 3202.31/xx: voltage output (0.1-10V) Operating ...

Process pressure: 0 bar - 30 bar
Process temperature: -10 °C - 80 °C

flow-meter for water and water-based media 4114.30 / 4115.30 (S115 oil calibrated ) Other media on request Analogue, 4-20mA output, 10:1 turn-down ratio Operating principle: calorimetric (thermal) Measuring ...

Process temperature: -1 °C - 80 °C

DUS-TT-P-420 Portable Ultrasonic Flowmeter enables the user to do flow measurement checks at many points in a flow process without the need for a permanent installation. This universal ...

Process pressure: 0.1 bar - 11 bar
Process temperature: -20 °C - 165 °C
Volumetric flow rate: 30 l/h - 640,000 l/h

Magnetic-inductive measurement of flow rate and volume of media with a minimum conductivity of >5μS/cm. - Precise measurement of media containing solids (< 5 % solid particle content) - Suitable for liquids, mash ...

Process pressure: 250, 150 psi
Process temperature: -40 °C - 454 °C

... insertion-style mass flow meter is the flow measurement solution for virtually any gas or gas mixture in line sizes from >2 inches up to 42 inches [50 mm to 1066 mm].1 ...

Process pressure: 10 psi - 50 psi
Process temperature: 4 °C - 38 °C

... thermal mass flow meter performance, ease of use and installed value for Air or Nitrogen service. This field selectable insertion unit features an application-specific instrument package for fast ordering, ...

Process pressure: 0 psi - 1,000 psi
Process temperature: -40 °C - 177 °C
Volumetric flow rate: 2 ft³/min - 3,183 ft³/min

... High Purity mass flowmeters are ideally suited for the pharmaceutical, biotech, food and beverage and semiconductor industries. FCI's thermal dispersion technology provides exceptionally accurate and repeatable indications ...

Process pressure: 10 bar
Process temperature: 65 °C
Volumetric flow rate: 17 l/min

... ideal for measuring the flow rate during the continuous operation, such as in bottling plants, welding robots and laser cooling system. The central loading of the blades of the turbine combined with the ...

Process pressure: 10 bar
Process temperature: 70 °C
Volumetric flow rate: 150 l/h

The FA/M is a series of flowmeters from Riels that is suitable for small flows of liquids and inert gases. The series analyzes the flow rate with high precision on the ...

Process pressure: 10 bar
Process temperature: 70 °C
Volumetric flow rate: 12,000 l/h

... is a flowmeter that is ideal for use in measuring low up to high flow rates of all kinds of liquid together with the conditions of the temperature and pressure contained with the limits of the resistance ...

... Solid-Particle Mass Flow Meter, manufactured by Eastern Instruments, is a bulk solids mass flow meter that measures nearly any flowable solids from powders to tortilla ...

The DSV by Eastern Instruments is a Multi-point Pitot air and gas flow meter which retains all features in the VAP3 pitot. The DSV for round ducts makes installation of the integral air flow ...

Process pressure: 0 bar - 2 bar
Process temperature: -10 °C - 40 °C
Volumetric flow rate: 0 m³/h - 3,200 m³/h

The BF-3000 flowmeter is developed for the measurement of total biogas output from small anaerobic digesters, it is designed to stand up to the wet and corrosive condition, unique composition reading function provide ...