In-line flow meters

Mass flow rate: 0 kg/h - 860,000 kg/h
Process temperature: -50 °C - 205 °C

CoriolisMaster FCB400 series of compact Coriolis mass flowmeters feature low pressure drop, high capacity, intuitive ABB common display, five modular I/O`s and various communication protocols, now with OIML R117 and MID approved. With ...

Mass flow rate: 0 kg/h - 250,000 kg/h
Process temperature: -50 °C - 205 °C
Process pressure: 0 bar - 60 bar

CoriolisMaster FCH400 series of compact Coriolis mass flowmeters for hygienic applications feature low pressure drop, high capacity, intuitive ABB common display, five modular I/Os and various communication protocols. The FCH400 series ...

Mass flow rate: 0 kg/h - 860,000 kg/h
Process temperature: -50 °C - 205 °C

CoriolisMaster FCB100 series of compact system integration flowmeters feature low pressure drop, high flow capacity, high speed RS485 Modbus communication and 2 digital outputs. With no up or downstream piping requirements the compact ...

Mass flow rate: 0 kg/h - 12,000 kg/h
Volumetric flow rate: 0 m³/h - 12 m³/h
Process temperature: 0 °C - 50 °C

MS-106 MASS-STREAM 200 LN/MIN - Proven direct inline CTA sensor (no bypass) - Excellent repeatability - Compact, rugged design (IP65, dust and waterproof) - Very low pressure drop - Less sensitivity to humidity or dirt - With integrated ...

Volumetric flow rate: 0.1 l/min - 30 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar

Low-Flow Magnetic Inductive Flow meters for water-like liquids No moving parts (no mechanical wear) Interference free operation Independence to inlet/outlet pipework Fast response Free pipe cross section: low ΔP, insensitive to ...

Volumetric flow rate: 5 l/min - 250 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar

Low-Flow Magnetic Inductive Flow meters for water-like liquids Compact, weatherproof (IP65) design No moving parts (no mechanical wear) Interference free operation Independence to inlet/outlet pipework Fast response Free pipe ...

Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 16 bar

The SITRANS F M MAG 8000 program of battery-operated water meters gives you the flexibility to install a reliable water flow meter virtually anywhere without sacrificing accuracy or performance. The SITRANS F M MAG 8000 program features ...

Volumetric flow rate: 15 m³/h - 3,600 m³/h
Process temperature: 0 °C - 200 °C
Process pressure: 0 bar - 40 bar

The SITRANS FUS380 is a battery or mains supply powered 2-path flowmeter designed for numerous standard applications. It can be used in all utility applications for water flow monitoring. The SITRANS FUS380 has a display that indicates ...

Volumetric flow rate: 15 m³/h - 36,000 m³/h
Process temperature: 0 °C - 200 °C
Process pressure: 0 bar - 40 bar

The 2-track SITRANS FUE380 is the custody transfer approved version of SITRANS FUS380. It can be verified and sealed for use in various countries. The approvals (MID, EN 1434 and OIML R75) are valid for energy metering systems. The battery ...

Process temperature: -25 °C - 120 °C

The OPTIFLUX 1300 is an electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for applications with conductive liquids (≥ 5 μS/cm) and higher solid content (up to 70%). Unlike the OPTIFLUX ...

The OPTIFLUX 2300 is an electromagnetic flowmeter (EMF) for all demanding applications with water and wastewater. The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics. The EMF ...

Electromagnetic flowmeter for applications with partially filled pipes • With integrated capacitive level measurement for flow measurement of water and wastewater (≥10% pipe fill level) • Accurate (±1%) and cost-saving alternative ...

Volumetric flow rate: 0.1 l/min - 900 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 16 bar

With volumetric flow quantity, total quantity and temperature indication High accuracy, repeatability and measurement dynamics For use in conductive media from 20 μS/cm With switching output, analogue output and pulse output ...

Volumetric flow rate: 1 l/min - 100 l/min

Integrated temperature measurement Rotatable multi-colour display The process connection can be rotated for optimum alignment Red/green colour change for process values Can be used for water with and without conductivity ...

Volumetric flow rate: 0.5 l/min - 150 l/min

Integrated temperature measurement Rotatable multi-colour display The process connection can be rotated for optimum alignment Red/green colour change for process values Can be used for water with and without conductivity ...

Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 10, 64, 100 bar

The High Performance MFM / MFC That Adapts To Your Process Intelligent Mass Flow Meters/Controllers EL-FLOW® Prestige, the latest generation thermal mass flow meters and controllers for gases, represents a truly ground-breaking shift ...

Volumetric flow rate: 0.1 l/min - 1,670 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 200, 400, 64, 100 bar

Proven Performance in Mass Flow Measurement & Control EL-FLOW® Select Series Mass Flow Meters/Controllers are thermal mass flow meters of modular construction with a ‘laboratory style’ pc-board housing. Control valves can either be ...

Volumetric flow rate: 0.1 l/min - 50 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 1,000, 1,500 psi

Metal Seal Gas Mass Flow Meters and Controllers of Bronkhorst are characterised by their unique, internationally patented metal-to-metal seal construction with excellent resealing capability. Furthermore they distinguish themselves by ...

Mass flow rate: 10 g/h - 27,000 g/h
Process temperature: 0 °C - 65 °C
Process pressure: 10 psi - 200 psi

Quantim® Series Coriolis Mass Flow Controllers & Meters The industry standard for low-flow Coriolis measurement and control. Achieve superior accuracy and unmatched zero stability in ultra-low-flow gas and liquid measurement and control ...

Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 34.47 bar

High purity flow path. Outstanding performance, reliability, and repeatability. Fast responding, repeatable delivery of process gases with high and ultra-high levels of purity—that’s the performance the GF100 series of metal sealed ...

Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10.34 bar
Precision: 0.35, 1 %

Fast responding, repeatable delivery of process gases with high and ultra-high levels of purity—that’s the performance the GF100 series of metal sealed mass flow controllers and meters provides. Designed for semiconductor, MOCVD and other ...

Volumetric flow rate: 1 l/min - 40 l/min
Process temperature: -10 °C - 90 °C

The SDN 552 series by EGE is an Electromagnetic flow meter which is designed for controlling various media. For this specific model, it comes with a digital display making it to suit for a wide range of application. Some of the function ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 20 bar

The SDN 552/4 series by EGE is a flow monitor which can control heavy flow up to 100 l/min. This is the compatible model which suit to sensor's expert series that is space efficient and all in one solution device. The equipment is used ...

Volumetric flow rate: 1 l/min - 40 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 20 bar

Inline-Compact • Digital display Series SDN - Flow controller Flow- and temperature monitoring of water and water-glycol mixtures Programmable Analog / temperature output 2x PNP output flow 2x PNP output temperature EGE offers ...

MASS FLOW METER 4040 SKU: 4040 Range: 0-300 L/min. Calibration: Air, O2, N2. Connection: 22 mm ISO. $1095.00 USD PRODUCT DETAILS Whether measuring gas flows in a laboratory, hospital or clinic, or manufacturing setting, TSI mass flow ...

Volumetric flow rate: 0 l/min - 150 l/min
Process temperature: -25 °C - 80 °C
Process pressure: 100, 200, 160, 80 bar

The VHZ gearwheel flow meter measures the flow by a volumetric principle, in which a pair of gearwheels is moved proportional to the flow rate. The movement of the gearwheels is measured through the enclosing housing wall by a sensor. ...

Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar

The very FIRST EPD Electromagnetic Flow Meter is certified by OIML in Asia. EPD30 offers the industry’s widest range of liners, electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse ...

Process temperature: -20 °C - 90 °C
Process pressure: 6 bar - 30 bar

Our solid flow meter MF 3000 is designed for flow measurement in metallic pipes from a few kg/h to many t/h. The system is suitable for on-line measurements of powders, dusts, pellets, and granules from 1 nm up to 2 cm in pneumatic or ...

Volumetric flow rate: 4 l/h - 200,000 l/h
Process temperature: -50 °C - 200 °C
Precision: 5, 2 %

New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve.

Volumetric flow rate: 4 l/h - 15,000 l/h
Process temperature: -30 °C - 100 °C
Precision: 5, 2 %

New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Body Wetted Parts Material: PVC, CPVC, PVDF Protection Class: IP66 Adjustable Micro Switch: 1 adjustble alarm ...

Volumetric flow rate: 0.4 l/h - 1,000 l/h
Process temperature: 0 °C - 60 °C
Precision: 2, 1.6 %

New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Case Material: SS316 Body Material: PVC, CPVC Float Material: SS316

The Panametrics DigitalFlow GM868 is a general purpose gas flow meter designed to measure gas flow in pipes or ducts. The meter includes wide-range transducers that block obstructions and, because of its design, eliminates pressure drop. ...

Process temperature: -200 °C - 600 °C

The PanaFlow HT is a SIL-rated flow meter that offers the ability to take accurate measurements at the bottom of a refinery. The PanaFlow HT is ideal for delayed coker units, fluidic catalytic cracking, vacuum distillation, crackers, ...

Process temperature: -40 °C - 150 °C

The PanaFlow Z3 by Panametrics is a three-path wetted meter designed specifically for dependable, accurate and repeatable flow measurement of process liquids. With a sleek industrial design and ultra-reliable electronics, it provides ...

Volumetric flow rate: 0 m³/s - 1.2 m³/s
Process temperature: -20 °C - 110 °C
Process pressure: 16 bar - 40 bar

The MS 1000 wafer sensor is easy to assemble thanks to the absence of flanges, it is installed by inserting it between various types of counter flanges (UNI, DIN, ANSI, JIS etc.). It is suitable for all main applications, particularly ...

Process temperature: -10 °C - 100 °C
Process pressure: 1,600,000 Pa
Precision: 2 %

The compact electromagnetic flow meter CS3900 ISOMAG integrates both the sensor and the converter in a single body. It is ideal for measuring fluid temperature and for flow rate adjustments based on process temperature, cooling systems ...

Volumetric flow rate: 0 m³/s - 0.1 m³/s
Process temperature: -20 °C - 150 °C
Process pressure: 16 bar - 25 bar

The MS 2410 sanitary sensor ISOMAG for electromagnetic flow meters is specific for use in food or pharmaceutical plants. It is resistant to vacuum (200 mbar absolute at a temperature of 100 ° C), ideal for CIP cycles, 3A and FDA certified. Description The ...

Process temperature: -10 °C - 70 °C
Process pressure: 20 bar - 300 bar

The DropsaDLFM allows precise monitoring of dual line systems. It can be piped in-line into the dual line system anywhere and measures the amount of flow being injected downstream. Typical applications in the steel industry can see ...

Volumetric flow rate: 0.1 l/min - 45 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi

model F single flow tube all PTFE/PCTFE in line rotameter Design Features ochemically inert components oremovable protective shield oindividually leak tested overtical in-line oflow ranges from 125 mLPM to 45 LPM water model ...

Volumetric flow rate: 0.1 l/min - 45.4 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi

Product Summary model L rugged PTFE-PFA flow meters offer solutions to low to medium flow range measurements Design Features ochemically inert components constructed from PFA PTFE and PCTE ostructurally rigid frame ooverlapping ...

Volumetric flow rate: 0 l/min - 1,000 l/min
Process temperature: 21 °C
Process pressure: 0 psi - 1,000 psi

Design Features • ± 1% FS accuracy is standard • rigid metallic construction • available flow ranges starting from 0 to 10 sccm up to 0 to 1000 slpm • maximum pressure of 1000 psig (70 bars) • leak integrity 1 x 10-9 sccs of helium • ...

Process temperature: -20 °C - 800 °C

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions with e. g. high ...

Process temperature: 150 °C
Process pressure: 150 bar

Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material concentration Electrodynamic flow sensor for measurement of low flow rates from 0 to 100 kg/h. For pipe diameters ...

Process temperature: 0 °C - 120 °C
Process pressure: 10 bar

Contact-less and maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe run Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in ...

Process temperature: -18 °C - 121 °C
Process pressure: 41, 16.5 bar
Precision: 0.5, 1, 2 %

The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters have no moving parts and are available for use ...

Process temperature: -40 °C - 454 °C
Process pressure: 70, 10 bar
Precision: 0.75, 0.5, 2 %

ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and innovations such as FCI patented Adaptive Sensing Technology™ (AST™), with the industry's most ...

Process temperature: -18 °C - 60 °C
Process pressure: 500 psi

Features flow monitoring with an additional output parameter for temperature. The transmitter can be configured to provide a solid state output with changes in flow and temperature. Ideal for semiconductor flow applications monitoring ...

Process temperature: -25 °C - 85 °C
Process pressure: 25 psi

PFLOW: OEM MEMS mass air flow sensors for medical and process control applications With high resistance towards clogging and pressure shocks PEWATRON has released the new MEMS mass air flow sensor PFLOW which incorporates the latest ...

Process pressure: 0 bar - 34.47 bar
Precision: 1 %
Repeatibility: 0.05 %

The HFM-200/HFC-202 is Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers. Featuring reliability and stability, the 200 Series is chosen by OEM's for its very stable performance with varying ambient ...

Process pressure: 0 Pa - 6,894,757.29 Pa
Precision: 1 %
Repeatibility: 0.05 %

The HFM-201/HFC-203, Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers accurately measure and control mass flow in a variety of applications. Featuring reliability and stability, the 200 Series ...

Process pressure: 0 Pa - 6,894,757.29 Pa
Precision: 0.75, 1 %
Repeatibility: 0.07 %

The all metal HFM-300/HFC-302 is Teledyne Hastings' metal sealed, fast response series of mass flow meters and controllers. Featuring reliability and stability, the 300 Series is chosen by OEM's for its fast response under a wide range ...

Process temperature: -40 °C - 85 °C

Self-sufficient measurement place operation independent of the mains supply Automatic measurement data transmission Robust solution for outdoor use Ready-made solution Maintenance work is reduced to a minimum Our system consists ...

• Designed according to DIN EN ISO 5167-4 • Undisturbed straight pipeline • Designed for liquids, gases or light fibres • Very low deposition danger – suitable for transporting light fibres • 2 X 8 pressure taps guarantee highest accuracy • ...

Volumetric flow rate: 2 l/min - 160 l/min
Process temperature: 85 °C
Process pressure: 0 bar - 2.3 bar

Axial turbine flowmeter for liquids • For measuring the volume flow rate or for dosing tasks with large flow rates • Designs and specifications see data sheet Technical data and functions • For measuring the volume flow rate ...

Features : Designed for industrial application. Air flow measurement up to 120 m/s. Resistant to high temperature, high pressure, dust, and corrosion. Sensor type : Pt20 / Pt300(Air velocity) / Pt1000(Temp.) Measuring range : 0 ... ...

Features : Suitable for clean air. Resistant to high pressure and high temperature. Sensor type : Thermal mass flow sensor Measuring range : 0 ... 90 m/s Output : 0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V / 0 ... 10 V / RS-485 Accuracy ...

Sensor type : Thermal mass flow sensor Measuring range : 0.1 ... 848 m³/h Output : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse Accuracy : ±1.5% F.S. IP rating : IP65 (IP67 option)

Mass flow rate: 1 kg/h - 20,000 kg/h
Process temperature: -20 °C - 450 °C
Process pressure: 0 bar - 6 bar

Microwave-based flow measurement for bulk solids MF 3000 Numerous bulk material applications require continuous measurement of mass flow, e.g. for exact dosing of a material or to determine the flow into a container. Many of the measuring ...