Clamp-on flow meters

Process temperature: -40 °C - 230 °C

The SITRANS FS230 digital clamp-on ultrasonic flowmeter is a process-optimizing solution for measuring flow in virtually any liquid application. Designed to provide both exceptional performance and outstanding cost savings, the FS230 ...

The SITRANS FS220 digital clamp-on ultrasonic flowmeter provides the most essential flow measurement functionalities with superior accuracy, cost efficiency and ease of use. It is the best-in-class solution for straightforward flow monitoring ...

Process temperature: 40 °C - 230 °C
Precision: 1 %
Repeatibility: 0.25 %

SITRANS FS290 is a portable ultrasonic flowmeter system for monitoring volumetric flow in pipes. It contains the SITRANS FST090 battery-operated transmitter and SITRANS FSS220 clamp-on sensors. Install the sensors quickly and easily on ...

Process temperature: -40 °C - 120 °C

Ultrasonic clamp-on flowmeter for temporary flow measurement of liquids • Portable, battery-powered meter, for on-site verification of process flows or inline meters at any location • For pipes DN15…1500 / 1⁄2…60" • With data logger ...

Process temperature: -40 °C - 200 °C

Ultrasonic clamp-on flowmeter for flow measurement of liquids • Stationary device, for installation at any location without process interruption or need to cut pipes • For pipes DN15…4000 / 1⁄2…160" • 4…20 mA, HART®7, Modbus The ...

Volumetric flow rate: 2 m³/h - 850 m³/h
Process temperature: 4 °C - 49 °C
Process pressure: 30 psi - 200 psi

Model 9090 Digital Flowmeter EXAIR's Digital Flowmeter, with data logging capability available, is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used, ...

Volumetric flow rate: 2 m³/h - 850 m³/h
Process temperature: 20 °F - 120 °F
Process pressure: 0 psi - 250 psi

Model 9090-DAT Digital Flowmeter EXAIR's Digital Flowmeter, with Data Logger included, is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used and the Data ...

Volumetric flow rate: 7 m³/h - 8,495 m³/h
Process temperature: 20 °F - 120 °F
Process pressure: 0 psi - 130 psi

Model H9095 Hot Tap Digital Flowmeter EXAIR’s Hot Tap Digital Flowmeter allows for installation under pressure, eliminating the need to isolate and remove pressure from the pipe it is being installed upon. It incorporates two valves ...

Process temperature: -20 °C - 80 °C
Process pressure: 0 psi - 10 psi
Precision: 0.25 %

The Area Velocity Flow Measurement method is the most common method of all flow measurements. The AVFM 6.1 Area Velocity Flow Meter uses a submersible ultrasonic sensor measuring both the level and velocity of flowing liquid to calculate ...

Process temperature: -23 °C - 60 °C
Process pressure: 0 psi - 10 psi
Precision: 2 %

Gaining flow measurement inside a pipe can sometimes be tricky. The DFM 6.1 Doppler Flow Meter works as a non-contacting, clamp-on flow meter to offer effective clamp-on pipe flow measurement from outside the pipe. Its Doppler technology ...

Process temperature: -20 °C - 50 °C

The Pulsar Flow Monitor is designed to be combined with the FlowPulse Sensor, a dedicated wall-mounted device that gives an instant indication to pipe flow. The unit is ideal for fixed installations, that require constant pipe flow measurements. ...

UDM 300 - Advanced ultrasonic technology for mobile and highly accurate flow measurements Special features: ■ Very high measurement accuracy (also bidirectional) ■ Accurate even at extremely low flow rates (e.g. minimum night flow) ■ ...

Process temperature: -20 °C - 60 °C
Precision: 2.5 %

Clamp-On Ultrasonic Flowmeters measure by using ultrasonic pulse waves to pass through the probe and strike the liquid material. While the pulse waves rapidly disperse through the liquid, the liquid flow will cause a small change in the ...

Process temperature: -40 °C - 150 °C

The Panametrics AquaTrans AT600 is a liquid clamp-on flow meter designed to be accurate, durable and cost-effective. Rugged and reliable, this meter will remain fixed to your pipe for years to come. Applications The AquaTrans AT600 flowmeter ...

Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 207 bar

The Panametrics AquaTrans AT868 ultrasonic liquid flowmeter is a rugged, cost-efficient, low maintenance transmitter package ideal for water applications. This convenient meter can be installed without shutting down your process, making ...

Process temperature: -40 °C - 70 °C
Process pressure: 0 bar - 56.2 bar

The Panametrics DigitalFlow GC868 ultrasonic gas flow meter is a fixed-installation clamp-on meter. Its advanced clamp-on ultrasonic transducers and clamping fixture make this flow meter accurate and easy to use in process environments, ...

Process temperature: -20 °C - 80 °C

Ultrasonic flowmeter TIME DELTA-C This clamp-on portable ultrasonic flowmeter consists of a detector clamped on the pipe (DN13 to 6000 mm depending on detectors) and of a and of a digital converter mounted remotely. It can measure bi-directional ...

Process temperature: 180 °C
Process pressure: 0.1 MPa

VISUALISE AND OPTIMISE YOUR STEAM CONSUMPTION The clamp-on saturated steam ultrasonic flowmeter is capable of measuring steam flow without the need to cut piping. Measure the steam flow with precision thanks to a new noise reduction ...

Process temperature: -15 °C - 85 °C

Integral Ultrasonic Flow meter for liquid measurement The S-flow flow meter contributes to energy savings and production process solutions. Reduces labour hours and installation costs Clamp-on type flow meter without pipe modification No ...

Process temperature: -10 °C - 60 °C
Precision: 3, 0.5, 1 %
Repeatibility: 0.15 %

The IFX-F100 clamp-on ultrasonic flow meter for fixed installations, for pipes of various materials and for pipes from DN10 to DN3000. Since clamp-on technology is not intrusive, this is suitable for measuring any fluid regardless ...

Process temperature: -30 °C - 130 °C
Precision: 1, 3, 0.5 %
Repeatibility: 0.15 %

The portable clamp-on flow meter IFX-P210 is available in single or double-string is ideal for a wide range of applications, from water network for leak detection or district in the network, to temporary replacement of inline flow meters, ...

Volumetric flow rate: 0 m³/h - 60 m³/h
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 16 bar

The ultrasonic range sensor IFX-M4-01 ISOFLUX is especially suitable for measuring energy consumption for fluids, even other than water, in closed or open indoor energy systems and also for water consumption. The advantages of the ...

Process temperature: -200 °C - 600 °C
Precision: 0.3, 1 %

Unmatched in Performance - The portable liquid flow meter for any purpose The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered ...

Process temperature: -40 °C - 600 °C

The FLUXUS F721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of liquids. With its new hardware design and improved, powerful digital signal processing it surpasses any other non-intrusive ...

Process temperature: -40 °C - 200 °C
Precision: 1 %

The Clamp-on Ultrasonic meter for Standard Volume Flow Measurement and API Determination in the Hydrocarbon Processing Industry FLUXUS H721 is FLEXIM’s flow and analytical measuring system for the hydrocarbon processing industry (HPI). ...

Process temperature: -30 °C - 70 °C

For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA sensors -Reasonable purchase costs -Reliable, with more than ...

Process temperature: -20 °C - 70 °C

Allows high accurate flow measurement using the transit time method in full pipes. Up to 4 measurement paths. -Proven ultrasonic transit time measurement -Single or multi path measurement up to 32 measurement paths with ...

Process temperature: -30 °C - 70 °C

Cost-efficient alternative to conventional EMFs/mag meters. For continuous flow measurement in slight to heavily polluted media in full pipes

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.2 %

The RIF600P is a tool that combines the fluid velocity measured by the principle of ultrasonics from the CLS600 probes and the diameter of the pipe to obtain flow and volume data. The physical principle behind the measurement is, by the ...

Process temperature: -40 °C - 230 °C
Precision: 1 %
Repeatibility: 0.2 %

The RIF600W is a wall-mounted ultrasonic flow meter. This device uses advanced technologies to provide accurate and real-time measurements of fluid flow. The RIF600W is designed for easy wall installation and operates without moving parts, ...

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.2 %

The RIF600S has a compact design that facilitates installation in control panels and makes it ideal for a wide range of applications. It has a high stability, making it suitable for use in industrial environments with vibrations and disturbances. ...

Volumetric flow rate: 0.3 l/min - 140 l/min
Process temperature: -20 °C - 70 °C

SONOFLOW CO.55 CLAMP-ON SENSOR - NON-CONTACT FLOW METERS FOR LIQUIDS IN FLEXIBLE TUBES The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures the flow rate of liquids in flexible plastic tubing fast and reliably. The non-invasive ...

Volumetric flow rate: 14 l/min
Process temperature: 10 °C - 50 °C

The hybrid flow-bubble sensors of the series SONOFLOW CO.56 Pro V2.0 and SONOFLOW CO.56 combine accurate flow measurement and reliable air bubble detection in liquid filled medical tubing. They feature a simple integration and can easily ...

Volumetric flow rate: 18 l/min
Process temperature: 0 °C - 90 °C

The sensors of the SEMIFLOW CO.65 series are specifically designed for applications in the semiconductor industry and are characterized by a number of essential features: •Highly precise and contact-free measurement •8 sensor sizes (¼", ...

AI.FFsonic MODEL Flow measurement at fixed transit time Speed range: max. ± 32m / s - Views: instantaneous flow, totalizer (volume) Outputs: 4 ÷ 20mA + 1 open collector + 1 relay Digital output RS 485 PROTOCOL MODBUS RTU Available slot ...

Process temperature: 0 °C - 75 °C
Precision: 1 %

CLAMP-ON ULTRASONIC FLOW AND TEMPERATURE METER Pipe sizes: DN 15, 20, 25, 32, 40 Piping Materials: Metals, PVC, PP or PVDF Types of Liquids: Water and other liquids such as Oil, Diesel Temp. range: 0..+75°C Output: 4-20mA Communication: ...

Process temperature: -30 °C - 160 °C
Precision: 1 %

High precision measurement: Accuracy: +/- 1%, Linearity: 0.5%, Repeatability: 0.2% Wide measuring range: Various types transducer for selection, pipe size measurement from DN15mm to DN6000mm Large Capacity Battery: Built-in rechargeable ...

Precision: 0.2 %

Electromagnetic flowmeters can be easily used in all liquids with conductivity over 20 uS. They provide a healthy and long-lasting measurement opportunity by changing the sensor selection in liquids with corrosive properties according ...

The SUTO S462 Clamp on Ultrasonic Flow Meter for water and other liquids offers our users easy installation, no process downtime, no pressure loss or leak and no contamination of the medium to be measured. It comes for pipe sizes ...

The SUTO ultrasonic clamp-on flow meter for water and other liquids S461 has all it takes to measure reliable, easy and accurate flow and consumption of water and other liquids. Based on the transit time technology, this flow meter comes ...