Aalborg liquid flow meters
Volumetric flow rate: 0 l/min - 10 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 100 psi
Multivariate liquid flow measurement in real time Measure flow rate, line pressure and line temperature simultaneously, all in real time. Add an optional totalizer to track cumulative ...
Alicat Scientific
... reached. Ultrasonic flowmeter UPF-02 is suitable for use in flow measuring tasks that require advanced performance, a simple installation method and an high portability.
Valcom
Volumetric flow rate: 10 l/min - 400 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 420 bar
The reference scale is calibrated in (l/min) are priced differently like FT5758-01 2-30 is priced at 1.290,712, FT5758-02 2-60 at 1.411,998 and FT5758-03 4-120 is priced at 1.533,262 in PVP (€).
Volumetric flow rate: 0 l/min - 500 l/min
Process pressure: 140 mbar - 4,000 mbar
Precision: 0.5 %
The DM500 tester is the evolution of the DM400. It uses the same measurement technology, a mass flow meter. It’s intended for all applications requiring flow control, can be integrated ...
delta control services
Volumetric flow rate: 1 l/min - 350 l/min
Process temperature: -20 °C - 60 °C
Precision: 2.5, 5 %
To capture gas flows away from the source of the leakage rate, measured by sampling at high speed, thus there is a dilution of the surrounding air. Accurate sample flow rate and natural gas concentration ...
Process temperature: -40 °C - 350 °C
Process pressure: 1.6 MPa - 4 MPa
Precision: 1, 1.5 %
... series Vortex Flow Meter can be used to detect and measure the flow of all kinds of gas, fluid and steam. 1% accuracy stainless steel steam gas liquid ...
Process temperature: 0 °C - 50 °C
Process pressure: 0.45 MPa
Precision: 1, 0.35 %
... coefficient is less than 0.02%F.S./℃(zero),0.05%F.S./ ℃ (span). 3. Metal-Sealed Models and High Purity Feature The wetted flow path of-the-the-line CS200 MFC is constructed from surface-passivated stainless ...
Beijing Sevenstar Flow Co., Ltd.
Process temperature: -40 °C - 85 °C
The Radar Flow Velocity Transmitter is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. ...
Volumetric flow rate: 2 l/h - 100 l/h
Process temperature: 150 °C
Process pressure: 34, 15 bar
For very small flow rates Measurement according to the oval gear principle For thin-bodied up to viscous liquids Low friction resistance Very precise dosing possible High resistance Wide range of ...
ALPHADYNAMIC PUMPS (UK) LTD
Process temperature: -180 °C - 650 °C
Precision: 1, 0.5, 3 %
... balancing Injection systems Demineralized water Cold – / Heat exchangers Clean Rooms Temporary replacement inline flowmeters Verification inline flowmeters Leakage- / Blockage ...
U-F-M b.v.
Volumetric flow rate: 20 l/h - 640,000 l/h
Process temperature: 0 °C - 120 °C
Process pressure: 0.1 bar - 11 bar
Magnetic-inductive flow meter VOLUMTEC Construction according to hygienic design standards, all Measurement in both flow directions Adjustability of the illuminated LC-Display Self-monitoring ...
Volumetric flow rate: 0.6 l/min - 700 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 150, 250, 300, 420, 160 bar
The FTB200 series flowmeter contains a magnetic detector and a magnetically permeable rotor (impeller). The flow of the medium drives the rotor (impeller) to turn. The rotational speed of the rotor (impeller) ...
Shanghai Nexon Electronic Co.
Features Low Cost, Small, Lightweight, and Portable High Accuracy Gauss or Tesla Display Units 0.1 mG /.01?T resolution Low Battery Detection
Volumetric flow rate: 30 l/h - 640,000 l/h
Process temperature: 0 °C - 130 °C
Magnetic inductive flow and volume measurement of media with a minimum conductivity >5 µS/cm | With IO-Link Now with IO-Link: Discover the advanteges in our new IO-Link Brochure! For liquids, mash ...
Anderson-Negele | Negele Messtechnik GmbH
Volumetric flow rate: 0 m³/h - 1,140 m³/h
Process temperature: 200 °F
Process pressure: 100 psi
FLO-METER™ FLOW MEASUREMENT FOR GASES AND LIQUIDS The UPC-Marathon Flo-Meter™ is a rugged and cost-efficient flow meter for gases ...
United Process Controls GmbH
Due to its design, the 4L flow meter is especially well suited for installation in panels and wall mounting. With the available standard measuring tubes it can be used for many measuring ranges. Protective ...
EM-Technik GmbH
Process temperature: -450 °F - 450 °F
... Turbine Flow Meter made up with 316 stainless steel material and is used for transferring and flowing applications. This device is equipped with a blade rotor and flanges that is also made from stainless ...
Hoffer Flow Controls
Process temperature: 500 °C
Process pressure: 600,000 Pa - 42,000,000 Pa
LG Venturi Flow Meters Flow element, also known as differential pressure flow meter, consists of a primary detection piece (flow element) ...
Dandong Top Electronics Instrument (Group) Co.,Ltd
Process temperature: 60 °C - 100 °C
Process pressure: 0 bar - 16 bar
Flowmeter according to the variabel area principle for liquids
Process temperature: 0 °C - 150 °C
Process pressure: 0.2 bar - 300 bar
A turbine flowmeter operating on the Pelton wheel principle for low flowrate applications on low viscosity fluids. Conventional axial flow turbine meters become increasingly difficult ...
Roxspur Measurement & Control
Volumetric flow rate: 0 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 25 bar
... Measuring accuracy - В±1% Temperature range,В°C - -40 – +85 Maximum flow rate in l/h - 500 Output interface - pulses, RS232, RS485, K-Line, CAN Seal rating - IP 67 Flow meter ...
Mechatronics
Volumetric flow rate: 0.2 l/h - 44,000 l/h
Process temperature: -10 °C - 260 °C
Process pressure: 0 bar - 29.4 bar
... Series, manufactured by Oval Corporation, is a positive displacement flow meter designed to provide an accurate liquid flow rate measurement. It has a maximum nominal ...
Oval Corporation
Volumetric flow rate: 10 l/min - 150 l/min
Process pressure: 0 bar - 3.5 bar
FMS-P is a digital flow meter designed to control the transfer system, allowing the fuel to be supplied only to authorised users. The authorisation is given by the owner of the system (MASTER) who can ...
A fast and easy change of the factory preset parameter allows the operation friendly display and the sensor keys – without opening the housing. The “Easy-Up” function guides the unpracticed user step by step fast and safe through the ...
ACS Control-System GmbH
Volumetric flow rate: 5 l/min - 60 l/min
Process temperature: -25 °C - 55 °C
Process pressure: 0.12 MPa - 0.35 MPa
ØTDW-BT55 flow meter with cast iron body and nodular cast iron distribution valve, adopts advanced technology, which can be widely used on different gasoline dispensers. ØThis product has advantages ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining