- Robotics - Automation - Industrial IT >
- Automation >
- Digital I/O >
- ADEPT TECHNOLOGY
ADEPT TECHNOLOGY digital I/O
... reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively ...
MTL INSTRUMENT
* MOS8 8 status outputs (PNP 100 mA) * MOS16 16 status outputs (PNP100 mA)
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
> 16DO >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
Expansion connector: 2 PCIe x1 Interface: PCIe x1 gold finger/ PCIe connector (36 pin) (opt.) Security: Security-ROM, Intrusion detection (8 doors) Voltage watcher: Voltage monitoring and warning via MCU
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
... related systems for high risk industries. The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NE or ND SPST relay output contact. Each channel enables a Safe Area load to ...
GM International srl
... Available as digital and analogue input and output, thermocouple, and resistance temperature detector (RTDs) modules. All modules are compact in size and will work with Modbus as well as other available protocols. The ...
... remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication. MIOS supports ...
... acquisition runs Inputs for strain gauges 1 counter input 4 inputs for strain gauges, diff, 24-bit 2 digital I/O, 24V Easy configuration : Easy mode
ADDI-DATA
The PCI-Express board with 32 digital outputs APCIe-2032 has 32 digital outputs, 24 Vand a programmable watchdog. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, ...
ADDI-DATA
The PCI-Express 32 digital I/O board APCIe-1500 has 32 digital inputs/outputs, 24 V, 14 inputs are interruptible. The 16 digital power outputs are equipped with protection ...
ADDI-DATA
... . 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red Digital Input Modul - DI24 BACnet/MS/TP (RS485) Master or slave mode configurable 24 channels digital ...
... connectors, max. 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red Digital input module DI24 MODBUS (RS485) Operating mode: Slave 24 channels digital ...
... extremely high demands on resolution and measuring accuracy. The RTD-P modules have an extremely accurate analogue-to-digital converter and a precision current source for resistance sensors. The modern process-based ...
HiTec Zang GmbH
... Connection type : 3-pin M8 socket • Digital counting function : 32-bit • Frequency measurement : ≤ 100 kHz • For the interrogation of : proximity sensors, switch contacts, fill level switches, pressure switches, digital ...
HiTec Zang GmbH
... (e.g. a solenoid or reflux separator). • 4 active digital outputs • For direct connection of proportional solenoids • LED control display • Short-circuit-proof • Signal : 4 active digital ...
HiTec Zang GmbH
8 Channels Digital Input and 8 Channels Digital Output I/O Module ● 8 Channels Digital input ● 8 Channels Digital output ● All Digital ...
Protech Systems
Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels ...
Protech Systems
5 Channels Digital Input and 6 Channels Relay Output Remote I/O Module ● 5 channels Digital input ● 4 channels Power Relay output and 2 channels Signal Relay output ● All Digital ...
Protech Systems
... using Modbus TCP/IP and MQTT. It has a range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic ...
... is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. 29 I/Os, some ...
METZ CONNECT
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, ...
METZ CONNECT
The Modbus module in an IP65 housing with 4 digital inputs and 2 relay outputs was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, ...
METZ CONNECT
ASi-3 Master/Scanner for Allen-Bradley ControlLogix, 2 ASi masters, diagnostic and configuration via RS232 diagnostic interface Technical data Fieldbus interface - ControlLogix ASi-5/ASi-3 - ASi-3 compatible Number of ASi networks, ...
Bihl+Wiedemann GmbH
> Inputs: 8 digital inputs > Outputs: 8 digital outputs, PNP type > Temperatures: the correct functionality of the node has been verified in a temperature range between -10° and 60 ° C > Power supply: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 8 digital > Outputs: 8 digital PNP > Maximum speed: 115.2 kbps > Distance reachable: 1.2 km > Power supply: 10 ... 30 V > Galvanic isolation: 200 Vac 50 Hz 1min > Communication: RS485 ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 16 digital inputs > Temperatures: the correct functionality of the node has been verified in a temperature range between -10° and 60 ° C > Power supply: 24V (10-30V) > Galvanic Isolation: 2000 Vca 50Hz > ...
ELCO Elettronica di A. Ligabue e C. snc
• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W ...
HIQUEL
... for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote ...
... Polyamid 8(12)~32 VDC -40°C … +80°C 35 + 23 Pin Tyco SealUSB2CAN interface for configuring device and diagnostics Up to 44 Digital Inputs Up to 4 Frequence Inputs Up to 44 Analog Inputs Up to 32 Current Inputs Up ...
Makersan
GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 35 Pin Tyco Seal USB2CAN Interface for Configuring Device Up to 26 Digital Inputs Up to 8 Frequency Inputs Up to 26 Analog Inputs Up to 10 Current Inputs Up to 6 Resistive/Temperature ...
Makersan
... 35 Pin Tyco Seal Connector User Configurable or Custom Software USB to CAN interface for device configuration Up to 24 Digital Inputs Up to 4 Frequency Inputs Up to 24 Analog Inputs Up to 8 Current Inputs Up to ...
Makersan
Distributed Process Intelligence type, P-NET via Light-Link, RS-485, USB Interface, Dual 100 Mbit Ethernet • Process Automation Controller • Programmable in COPP • P-NET via Light-Link, RS485 and Ethernet • Dual 100 Mbit Ethernet ...
PROCES-DATA A/S
... Energy Exchange Controller CENTRAL UNIT -Processor : STM32 32 bits/200Mhz -Operating system : Free RTOS -I/O coprocessor : FPGA Xilinx -Memories : SDRAM 8Mo, NAND, Crypto. MOUNTING AND INSTALLATION ...
LEROY AUTOMATION
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
... generation and Digital to Analog output modules for providing signal simulation capability The EX1200-1538 is a high-performance multifunction card that provides 8-channels of independent 32-bit counters, 16 channels ...
AMETEK VTI Instruments
The PCH Raw Data Box provides four additional raw data output channels to PCH Engineering’s top-of-the-line vibration monitor, PCH 1420. PCH Raw Data Box is a stand-alone module in PCH Engineering’s modular condition monitoring solution, ...
The ELPRO 115E-2 Ethernet Networking I/O and Gateway is a multiple I/O node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. Designed to work with ...
ELPRO Technologies
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining