AIGNEP ball valves

392 companies | 2,418 products
ball valve
ball valve
60010227

DN: 1 in

Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)

See the other products
Unidelta S.p.A.
ball valve
ball valve
M series

DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.

ball valve
ball valve
VL

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.

floating ball valve
floating ball valve
NP series

DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C

Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures ...

turbine valve
turbine valve

DN: 50 mm - 1,600 mm
Pressure: 25 bar - 100 bar

Di Nicola manufactures safety turbine ball valves in carbon steel ASTM 216 WCB / N + GP 240GH, in fabricated EN S275J0 steel , in ASTM CF8 and CF8M cast stainless steel and fabricated Stainless steel ...

ball valve
ball valve
2L/PV-1

DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C

... 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...

ball valve
ball valve

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...

See the other products
DIVATEC,SL
ball valve
ball valve
BV

DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C

• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • ...

See the other products
DIVATEC,SL
compact valve
compact valve
C10

DN: 15 mm - 50 mm

... spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value ...

See the other products
DIVATEC,SL
ball valve
ball valve
2700

DN: 20 mm - 32 mm
Pressure: 63 psi
Temperature: -328 °F - 248 °F

CO2 for food / industrialapplications LAr for welding Cooling plants

See the other products
Goetze KG Armaturen
ball valve
ball valve

floating ball valve
floating ball valve
Z series

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

pressure-control valve
pressure-control valve
PCV-125-AL

DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C

... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...

ball valve
ball valve
QTM7

THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...

ball valve
ball valve
SB series

Pressure: 6,000 psi

... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...

See the other products
Alco
ball valve
ball valve
DN 50 - 200, PN 16 | 02 series

... PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special execution [Series 02.111] with ball ...

ball valve
ball valve
SBC 782

DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C

... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...

See the other products
PIETRO FIORENTINI
ball valve
ball valve
Deltaflux

DN: 2 in - 24 in

... Shut Down Valve) and HIPPS (High Integrity Pipeline Protection System) systems. Fields of application: • Natural gas industry; • Energy; • Petrolchemical industry; • Water transport. Deltaflux valves ...

See the other products
PIETRO FIORENTINI
ball valve
ball valve
Synchroflux

DN: 1 in - 8 in
Pressure: 102 bar
Temperature: -20 °C - 60 °C

CONTROL GAS VALVES Synchroflux Synchroflux valves are bypass and throttling devices suitable for use with previously treated, non-aggressive gaseous fluids. The main characteristics of these valves ...

See the other products
PIETRO FIORENTINI
ball valve
ball valve
VVS

DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar

... restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve ...

See the other products
BARDIANI VALVOLE S.p.a.
floating ball valve
floating ball valve
V80.02

DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 50 °C

ndustrial float valve with die casted body in brass or bronze. Guided sutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level control and other liquids. Level ...

See the other products
Metalurgica Zaes S.L.
floating ball valve
floating ball valve
81.01

DN: 0.5 in - 3 in
Pressure: 10 bar
Temperature: 50 °C

Industrial float valve with die casted body in brass or bronze. Guided shutter with rubber seal (elastomeric type). Progressive closure. Suitable for water tank level control and other liquids. Level double regulation ...

See the other products
Metalurgica Zaes S.L.
floating ball valve
floating ball valve
V81.03

DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 50 °C

Industrial float valve with die casted body in brass or bronze. Guided shutter with rubber seal (elastomeric type). Progressive closure. Suitable for water tank level control and other liquids. Level double regulation ...

See the other products
Metalurgica Zaes S.L.
ball valve
ball valve
PA 46,

The PA intermittent blowdown valve is set to the open position using a lever. Here, the pressure pin forces the spring-loaded valve plug out of the valve seat, opening up a large cross ...

switching valve
switching valve
SLT series

DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...

unidirectional valve
unidirectional valve
UM series

DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.

quick-release exhaust valve
quick-release exhaust valve
SR series

DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Quick exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components ...

ball valve
ball valve
MV series

Pressure: 0 psi - 5,500 psi

The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...

See the other products
Generant
ball valve
ball valve
102448

DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F

The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X ...

ball valve
ball valve
Ball-Trol™

DN: 2 mm - 30 mm

This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...

ball valve
ball valve
DSCV-SA

Temperature: 454, 565 °C

The DSCV-SA is generally used for Turbine Bypass applications where the valves typically remain closed for long periods of time to isolate steam flow.: Cast & fabricated design. Wide size configuration Extremely ...

ball valve
ball valve
Ball-Trol™

DN: 2 in - 30 in

This valve offers the highest Cvs of any competitive valve in the wide open position, yet gives modulating control over the full range of travel. Features This bi-directional valve ...

ball valve
ball valve
Check-Trol™

DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C

Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...

ball valve
ball valve
DB-3/4

DN: 0.75 in
Flow rate: 9 us gal/min

... hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in ¾” connection All brass body with non-ferrous internals The differential bypass ...

cryogenic valve
cryogenic valve
C95

DN: 2 in - 12 in

... direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding ...

See the other products
HABONIM
ball valve
ball valve
C96

DN: 2 in - 12 in
Pressure: 420 bar

Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient ...

See the other products
HABONIM
floating ball valve
floating ball valve
C28

DN: 0.25 in - 8 in
Pressure: 1,494 psi

... lower operating torque. Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing ...

See the other products
HABONIM
ball valve
ball valve
X1666

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

See the other products
SOCLA
ball valve
ball valve
X2777

DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M

See the other products
SOCLA
ball valve
ball valve
X2900

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

See the other products
SOCLA
ball valve
ball valve
249117

DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C

2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium ...

See the other products
Mader
ball valve
ball valve
217750

DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C

2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium ...

See the other products
Mader
ball valve
ball valve
217696

DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C

2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material ...

See the other products
Mader
ball valve
ball valve
BKR series

DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C

... Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring

ball valve
ball valve
BKR VA

DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C

... Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Material Stainless steel housing, ball and operating shaft POM ball seal NBR O-ring

ball valve
ball valve
3 BKR ND L

DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C

... 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, hard chrome-plated PTFE ball seal

exhibit your products

& reach your clients in one place, all year round

Exhibit with us