Ball valves

... Part 0006522676 air fill valve for portable stainless steel tanks. ...

DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 200 °C

... excursions to which the valve is subjected Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve Longer lifetime of the valve Less ...

DN: 2 in - 12 in

... direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding between ball, ...

DN: 8 mm - 150 mm
Pressure: 125 bar

... Ball valve for food applications according to regulation EU1935/2004, EG 10/2011 and FDA. Three-piece body, pressure rating depending on nominal size up to PN125, ball floating, vacuum-tight. Bore Full ...

DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C

... 25 different configurations to drive multiple fluids. On demand FKM, EPDMe HNBR. To complete the range traditional ball valves. Main advantages - 2-3 ways with exhaust - Bulkhead - Multiple fluids - Supercompact ...

DN: 32, 25, 63, 40, 20 mm

... Diverter ball valve made of gunmetal with threaded connections As already implemented with the stainless steel series 2700, the gunmetal diverter ball valve 2780 possesses a flow geometry ...

DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C

... Metso’s Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. ...

Pressure: 0 psi - 5,500 psi

... The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve Configuration (Seal ...

Pressure: 6,000 psi

... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring an altogether safe, ...

... PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special execution [Series 02.111] with ball and stem made ...

DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C

... The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...

DN: 6 in - 48 in
Pressure: 400 psi
Temperature: -30 °C - 200 °C

... Reduced Bore, Lever Handle, Floating Ball Design to EN488 Pressure to EN12266.1 ...

DN: 0.5 in - 4 in
Pressure: 10, 30, 5 bar
Temperature: 0 °C - 150 °C

... high purity ball valves are engineered to be a true process piping component, suitable for intercepting pure steam and pharmaceutical fluids under pressure. These three pieces ball valves ...

DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C

... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure Control Valve ...

DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar

... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and locking knob located ...

DN: 0.5 in - 3 in

... Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ball ...

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

... C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2 ...

... The AWH Ven and Exhaust Valve is integrated with a low density moving ball which serves as its control element. This ball is capable of operating like a ball check valve. ...

DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C

... YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...

DN: 50 mm - 1,400 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 190 °C

... and improve profitability CAMERON T30 Series fully welded ball valves reduce the total cost of ownership by minimizing fugitive emissions, simplifying maintenance, and eliminating valve replacement ...

DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C

... heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the ...

DN: 150 mm - 350 mm
Pressure: -1 bar - 6 bar
Temperature: -52 °C - 180 °C

... Application The diverter valve Y is used especially for diverting the bulk material flow in pneumatic dense- and dilute-phase conveying systems. The patented design of the plug enables application in any conveying direction. Design ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO standards. Modular ...

DN: 20 mm - 200 mm
Pressure: 9, 16 bar
Temperature: -10 °C - 150 °C

... The Cast Iron Ball Valves are designed with such intricate detail for functionality and reliabilty. This valve features chromium plated brass ball. PTFE seats. Steel stem and ever. Connection ...