Ball valves

DN: 8 mm - 150 mm
Pressure: 125 bar

... Ball valve for food applications according to regulation EU1935/2004, EG 10/2011 and FDA. Three-piece body, pressure rating depending on nominal size up to PN125, ball floating, vacuum-tight. Bore Full ...

DN: 32, 25, 63, 40, 20 mm

... Diverter ball valve made of gunmetal with threaded connections As already implemented with the stainless steel series 2700, the gunmetal diverter ball valve 2780 possesses a flow geometry ...

DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C

... The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...

... The PA intermittent blowdown valve is set to the open position using a lever. Here, the pressure pin forces the spring-loaded valve plug out of the valve seat, opening up a large cross section. The resulting ...

DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C

... Metso’s Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. ...

Pressure: 0 psi - 5,500 psi

... The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve Configuration (Seal ...

DN: 25 mm - 150 mm

... generation New, shorter lanterns Shortened vertical socket on the valve configurations "L" and "T" Advantages of the ECOVENT® valves: Use of the established and proven VARIVENT® valve housing VARIVENT® ...

Pressure: 6,000 psi

... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring an altogether safe, ...

... PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special execution [Series 02.111] with ball and stem made ...

DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar

... restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve body whose opening ...

DN: 1, 0.5, 0.75 in
Pressure: 600 psi
Temperature: 500 °F

... liquid: 1000 psi

General
product group: valves ( ball valves)
ETIM class: EC011343 Ball valve
country of origin: United States
brand: Apollo
series: ...

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with ...

DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar

... via an integrated 1/4 turn isolation valve John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves ...

... - Regulating valve, Elbow regulating valve - Fine regulating valve, Elbow fine regulating valve - Taper seat non-return valve - Needle valve - Stop cock - ...

DN: 6 in - 48 in
Pressure: 400 psi
Temperature: -30 °C - 200 °C

... Reduced Bore, Lever Handle, Floating Ball Design to EN488 Pressure to EN12266.1 ...

DN: 0.5 in - 4 in
Pressure: 10, 30, 5 bar
Temperature: 0 °C - 150 °C

... high purity ball valves are engineered to be a true process piping component, suitable for intercepting pure steam and pharmaceutical fluids under pressure. These three pieces ball valves ...

DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C

... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure Control Valve ...

DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar

... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and locking knob located ...

DN: 0.5 in - 3 in

... Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ball ...

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

... C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2 ...

... The AWH Ven and Exhaust Valve is integrated with a low density moving ball which serves as its control element. This ball is capable of operating like a ball check valve. ...

DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C

... YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...

DN: 50 mm - 1,400 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 190 °C

... and improve profitability CAMERON T30 Series fully welded ball valves reduce the total cost of ownership by minimizing fugitive emissions, simplifying maintenance, and eliminating valve replacement ...

DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C

... heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the ...

DN: 150 mm - 350 mm
Pressure: -1 bar - 6 bar
Temperature: -52 °C - 180 °C

... Application The diverter valve Y is used especially for diverting the bulk material flow in pneumatic dense- and dilute-phase conveying systems. The patented design of the plug enables application in any conveying direction. Design ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO standards. Modular ...

DN: 20 mm - 200 mm
Pressure: 9, 16 bar
Temperature: -10 °C - 150 °C

... The Cast Iron Ball Valves are designed with such intricate detail for functionality and reliabilty. This valve features chromium plated brass ball. PTFE seats. Steel stem and ever. Connection ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C

... injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS (Praher Labelling System) Version with plastic screws available on request Seal materials - FPM Ball ...

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... DESIGN The ball segment valves high capacity comes from the design of its seat and ball segment. Compared to other valve designs it is often possible to use smaller and more economical ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

... PVC Construction Ball Valves, fitted with 90° turn Pneumatic Rotary Actuator. Valves can be used for Water, Air, Oil, Corrosive Chemicals, Dirty fluids. The ball Valves ...

Pressure: 100, 210 bar

... 2-Way Ball Valve (FxF) Working Pressures: 100 | 210 bar (1500 | 3000 PSI) ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket ...

... Ball valves are long lasting and can work perfectly even you are operating it for years most especially the metal-seated ball valves which can meet the highest requirement. It is recommended ...

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

... Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high ...

DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C

... Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation ...

... series is an isolation valve developed by MKS Instruments. It is built with stainless steel construction with precise vacuum isolation. It is equipped with bellows and ball valves, manual, pneumatic ...

DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar

... the cavitation zone Insensitive to cavitation due to simple open/shut valve All internal parts accessible from above, maintenance of the control unit without stopping the main valve Adjustable closing rate for low surge ...

DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ...

DN: 8 mm - 80 mm
Pressure: 64 bar

... Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions. ...