DN: 80 mm - 500 mm
... High-lift valve fitting with ball shut-off for tapping without the use of an auxiliary shut-off. For the entire nominal diameter range from DN 80 to DN 500, only one connection piece with patented Vario seal is required. ...
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection ...
WIKA Alexander Wiegand SE & Co. KG
DN: 0.5 in - 2 in
... two shut-off valves to separate the process from the instrument side and a vent valve. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. For ...
WIKA Alexander Wiegand SE & Co. KG
... Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap style (round or ...
DN: 1.5 mm - 382 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 140 °C
... The Alfa Laval Sanitary Ball Valve (SBV) is a hygienic ball valve designed with a bore diameter the same size as the pipeline diameter. The full-bore design with zero flow restriction ...
DN: 0.5 in - 2 in
... off, floating, or proportional control If actuator is supplied, it is not mounted, allowing access to sweat end connection Valve connection types: threaded, sweat and press fit ...
Pressure: 600 psi
... The CDV4 Series motorized ball valve is designed for heavy duty applications with high pressure capabilities up to 600 psig. The CDV4 Series has microprocessor based electronics with 10 programmable settings. The weatherproof ...
DN: 20, 15, 25 mm
Pressure: 2.5 bar
... Ajax WaterStop Jeweller is a smart valve designed to protect facilities from flooding. The valve automatically shuts off the water supply within 7 seconds of a leak being detected, whether by LeaksProtect Jeweller or ...
DN: 32 mm - 225 mm
Pressure: 10 bar
... fusion the FRIALEN- Ball Valve KHP must be lined up to suit the type of actuation intended, in order to ensure that the installation kit KBS will placed correctly. Good reasons for using the FRIALEN- Ball ...
Aliaxis
DN: 11 mm
Pressure: 0 bar - 4 bar
Temperature: 20 °C
... Ball valve PP fits all containers with G 3/4" connection thread. It can be attached to nearly all containers with thread adapters. Robust industrial quality, large flow. - Suitable for crystallising media - With connecting ...
DN: 9.525 mm
Pressure: 10 bar
... SOLENOID VALVE FOR AIR, TYPE 3/2, 3/8", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/2" (F). 24 V DC. Normally closed type. 10 bar. ...
DN: 6.35 mm
Pressure: 10 bar
... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, 1/4", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/4" (F). 24 V DC. Normally open type N.O. 10 bar. ...
DN: 6.35 mm
Pressure: 65 bar
... Low and medium pressure 1/4" BSP (FF), quarter turn valve. ...
Pressure: 100 bar
Temperature: 80 °C
... The ball valve is manufactured from H17N14M2 grade material, which is equivalent to 316 stainless steel. Maximum temperatures of the medium should not be more than 80 degrees Celsius. The maximum working pressure is 100 ...
... 3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 16 bar
Temperature: -10 °C - 100 °C
... Materials and construction
- Valve body: DZR corrosion-resistant brass (EN12165-CW617N-DW)
- Flow sensor: PEEK body with HC276 electrodes
- Valve unit: modulating 2-way ball
... Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... The durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball ...
Hughes Safety Showers
... Main valve assembly suitable for the 350L emergency tank shower from Hughes. 11/2 inch single union safeblock grey UPVC valve with solvent cement sockets. • WRAS approved • ISO EN 1452-3, NF and KIW A compliant • ...
Hughes Safety Showers
DN: 13 mm - 73 mm
Pressure: 0 bar - 45 bar
Temperature: -40 °C - 120 °C
... operated shut-off ball valve designed for liquid, suction and hot-gas pipelines in commercial air-conditioning and refrigeration systems. The valve stem opens or closes the internal flow path and the ...
DN: 50 mm
Temperature: -26 °C - 240 °C
... 2” access fitting. The valves have a bleed valve located on the non-process side of the ball. This bleed valve may be used to drain the retrieval tool, sample process, or be used ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
... Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges ...
... should be paid to the use of electric ball valves and butterfly valves in the following environments. Function classification 1. Bypass valve: The ball valve ...
... FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle and does ...
Pressure: 600 bar
... • Manual operated valves (leakage free) • 3/3-way for use with single acting cylinders • 4/3-way for use with double acting cylinders • Maximum flow 40 l/min • Maximum working pressure 600 bar • Oil ports M18x1,5 • Lever operated ...
QUIRI
DN: 8, 14, 10 mm
Pressure: 0 bar - 0 bar
... 1/4 TURN ISOLATING VALVE 2/2 MALE-FEMALE G1/2" D - 29 KV - 5.4 i - 10 Plage de pression (bar) - 0 / 10 Raccord Cote Circuit - 1/2" Ø Nominal - 10 ...
DN: 2 in
... BACKWASH VALVE FOR SIDE MOUNTED SAND & D.E. FILTERS The side mounted Hi-Flow valve is designed for maximum performance and working pressures. Available in 2-in. slip models. FEATURES PVC body Large, one-piece ...
DN: 0.25 in
Pressure: 5,000 psi
... floating” ball principle, this design allows the ball to turn freely between the ball seals. A positive seal is attained by fluid pressure acting on the upstream surface of the ball and ...
Pressure: 16 bar
... PRODUCT CHARACTERISTICS Mostly made of FiberTech composite, Leader WYES have ultra lightweight PN16 wye ball valves. Equipped with wide opening/closing handles for excellent grip with gloves, they also have swivel inlet ...
... Pro-Fill Valve is a standard valve designed for golf cart battery watering applications or any other battery watering applications in enclosed spaces. ...
DN: 65 mm - 150 mm
... This model is designed for installation in a flight conveyor line. Materials: Our samplers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321 ...
DN: 1.2, 1.122 in
Pressure: 0 psi - 450 psi
Temperature: -4 °F - 200 °F
... Palmer Ball Valves offer economical, quality solutions for the most demanding applications. Ball Valves come in nickel plated brass with a hard chrome plated brass ball. ...
... Paani Precision Products LLP is one of the most renowned Brass Ball Valves Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, we also ...
... high-quality, hot-forged brass CW617N with high strength. The Stahlmann range of fittings includes unions, elbows, tees and ball valve fittings. The unique design of the fittings ensures a tight and durable connection ...
... Epsilon™ is a low-spill dry disconnect coupling, based on a double ball valve system integrating a sophisticated safety design. Beyond the common advantages of a ball valve design, Epsilon ...
DN: 65 mm - 350 mm
... Insensitive to gas pressure surges Optimum grease distribution due to improved lubrication groove system Ball bearing plug pin ...
DN: 25 mm
... 3-way ball valve ABS, d=25mm with T-bore. • Ball position imprinted in lever • Integrated fixing system with mounted threaded bushes • Lever with integrated tool for adjustment ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -25 °C - 180 °C
... 2 Pcs full bore ball valve construction: stainless steel CF 8M S (316). Investment casting. Gas threaded ends din 2999. Seats and seals: PTFE + 15% GF o´ring stem: viton. Manually operated by handle with locking system ...
Italmanometri S.r.l
DN: 0.125 in - 0.75 in
Pressure: 15 bar
Temperature: -15 °C - 220 °C
... Ball valve for all hydraulic and pneumatic. Ideal for water, oil, compressed air. Operating Temperature: -15 ° to 220 ° C / 0 ° 150 ° C in the absence of steam -15 ° 60 ° C for gas Threaded port ISO228 DIN259 BS2779 Description: ...
MASTERTUBI spa
DN: 1 in - 6 in
Pressure: 10, 19 psi
Temperature: 100 °C
... benefits this valve can bring. The valve has all of the high quality features you’d expect from the world’s leading manufacturer of PFA lined valves, such as adjustable stem packing, T slots to anchor ...
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -20 °C - 60 °C
... and proper use Ball valve for manual shutting off gas in accordance with DVGW code of practice G 260, DIN EN 437, air and water, light and heavy fuel oil. Construction – housing DN 15 - DN 20 steel housing DN 25 ...
DN: 0.125 in
Pressure: 150 psi
... HV operating valves are three position manually operated pneumatic valves that direct air flow to open and close MicroCentric air chucks and LDZ Air Cylinders. Each HV valve includes air hoses and ...
the best suppliers