Ball valves

DN: 30 mm

... Valves with ball shutter Valves with ball shutters activate suction, creating vacuum in the cups on which they are applied, only when the load to be held activates the sealing shutter. They ...

DN: 0.375, 0.25, 0.5 in

... miniature vacuum valves These small manual valves are suited for intercepting vacuum on vacuum cup holders and any small utility in which solenoid valves cannot be installed. They feature a hexagonal ...

DN: 0.25 in - 3 in

... Manual 2-way vacuum valves These manual valves are used for intercepting vacuum in all those plants where solenoid valves cannot be installed. They feature a die-cast nickel-plated brass body, a chromed ...

DN: 6, 3, 4 mm
Pressure: -750 mm/Hg - 5,250.4 mm/Hg
Temperature: 0 °C - 60 °C

... Ball Valve turns on and off air pressure to pneumatic devices. Easily adjustable lever with scale. The flow rate can be adjusted roughly by setting the angle of the lever. ...

Pressure: 130 psi
Temperature: 32 °F - 176 °F

... The products are suitable for applications chemical fluid/mixed gases. The metal parts of the ball valve are made of stainless steel SUS304. The products are suitable for applications under chemical environment. Light-weight, ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 5.5 MPa
Temperature: -29 °C - 232 °C

... off the valve body. Prevent stem come-off from valve body. No restriction for flow direction. IN/OUT flow can be connected to both side of valve. Oil-free for all parts. There is no intentional ...

DN: 8 mm - 65 mm
Pressure: 0 bar - 63 bar
Temperature: -40 °C - 180 °C

... Basic ball valve with threaded connection and low weight

The GEMÜ B20 2-piece 2/2-way metal ball valve is manually operated. It has a plastic sleeved lockable hand lever. The seat ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 100 °C

... Lightweight ball valve available as straight-through or multi-port version

The GEMÜ 717 2/2 or 3/2-way plastic ball valve has an ergonomically designed hand lever and is manually ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 60 °C

... Robust, versatile and easy-to-operate ball valve

GEMÜ S717 is a 2/2-way plastic ball valve available in sizes DN 10 to 100. It is equipped with a plastic manual actuator. The seat ...

DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C

... ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection ...

DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C

... release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical and compact than 3-way valves • ...

DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C

... 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...

Pressure: 15 psi - 150 psi
Flow rate: 220, 250, 140 l/min

... The MEV-2 threaded exhaust valve provides air flow of scfm @ 50 psig; 9scfm @ 100 psig (exhaust rate); 220 l/min @ 6 bar. Force at 50 psig, opens after approx 5 psig drop; and force at 3.5 bar, opens after approx. 0.35 bar drop. Mounts ...

DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C

... The ball sector valve type 4040 with pneumatic actuator can be used for almost all on/off and control applications, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary ...

DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C

... The ball sector motor valve type 4030 is used in a number of process applications for shut-off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability ...

DN: 80 mm - 250 mm
Pressure: 10 bar - 25 bar
Temperature: -40 °C - 220 °C

... The ball sector valve type 4032 with high-resolution motor actuator providing over 8,000 steps of resolution in 90° of travel. Developed as a basis weight control valve for paper production, this high-precision ...

DN: 125, 150, 200 mm
Pressure: 10 bar

... special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation. For DN 250÷400 valves, the drilling pattern for the self-centring system is of the traditional ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C

... way DUAL BLOCK® ball valve with female ends for solvent welding, ASTM series with electric actuator 24 V AC/DC “L” ball. FIP has developed a TKD DUAL BLOCK® ball valve ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C

... 3 way DUAL BLOCK® ball valve with female ends, ASTM series with electric actuator 24 V AC/DC “L” ball. FIP has developed a TKD DUAL BLOCK® ball valve to introduce ...

DN: 20, 25, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... 2-way MM BRASS with caps and tangs Full bore PN16 ...

DN: 25, 20, 15 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... 2 way MF BRASS Sintesi ball valve 2-way MF BRASS with cap and tang ...

DN: 15, 25, 20 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... 3-way MMM BRASS with caps and tangs Full bore PN16 ...

... Bypass valve with pressure regulator valve, can be utilized in applications where the pump is operating constantly. ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

... Circuit selector valve, manual operation maximum pressure ...

DN: 1, 0.75, 0.5 in
Pressure: 400, 350, 500 bar
Temperature: -20 °C - 125 °C

... Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options. ...

DN: 6 mm - 40 mm
Pressure: 1.5 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard ...

DN: 6 mm - 40 mm
Pressure: 40 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard ...

DN: 10 mm
Pressure: 0 bar - 40 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard ...

DN: 0.375, 0.25, 0.75, 0.5 in
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... – Robust design – Modular structure Operating pressure - Max. 25 bar, depending on design Materials - Body made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ ...

DN: 10, 7, 8, 12 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of PA66 O-ring made of NBR70 Thread Cyl. thread, DIN EN ISO 228 Con. ...

DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials series 20, 21, 30, 31, DVGW series 40,41, Ball-valve with air vent Thread Cyl. ...

DN: 1.78 mm
Pressure: 500 psi

... Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About ...

DN: 1.78 mm
Pressure: 0 psi - 500 psi

... Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The MBVMD allows bi-directional flow between a common inlet port on the bottom ...

DN: 1.78 mm
Pressure: 500 psi

... selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between ...

DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar

... Overview
UPVC double union ball valve with adjustable seat and female plain ends.

Product Details

• Type: UPVC Ball Valves
• Brand: U-PVC Ball

DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar

... union UPVC ball valve BVDL13 for fluid isolation, featuring an adjustable seat and BS female plain ends; available in sizes from 1/2" to 4".

Product details

• Brand: U-PVC Ball

DN: 25 mm
Pressure: 10 bar

... Single union ball valve with male threaded ends for isolation and flow control in uPVC piping systems.

Product information

• Type: UPVC Ball Valves
• Brand:

DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C

... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, this will cause ...

DN: 1.5, 1.25, 1, 2 in
Pressure: 300 psi
Temperature: -10 °C - 120 °C

... The UL Listed Test and Drain Valve, also known as Test Valve or Fire Sprinkler Drain Valve, is a type of valve with both a test function and a quick drain function. An essential product ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

... quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection function to release air pockets that collect at each high point of a full pressured ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 65 °C

... Product Overview
The EBV series electric ball valves are high-performance control valves available in V-port and stainless steel sanitary versions. They are designed for precise flow regulation ...

DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C

... They are ON/OFF valves for various application areas: air, water and hydraulic circuits, and it’s also possible the use for pneumatic vacuum. ...

DN: 16 mm

... Ball valve in action Ball valve VKE 16, stainless steel, KF DN 16 Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. A precisely ...

... Gas inlet valve in action Gas inlet valve VGL, stainless steel, with soldering connections Gas inlet valves are small hand operated valves for admitting gases into a vacuum system. ...

DN: 6 mm

... The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal. ...

DN: 0.25 in - 2 in
Pressure: 800, 1,000 psi
Temperature: -5 °C - 175 °C

... A351 CF8M / 316 Connection Type: Thread Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 800psi (56kg/cm2) for 1-1/4”~2”; Valves inspected and tested ...

DN: 0.25 in - 4 in
Pressure: 800, 600, 1,000 psi
Temperature: -5 °C - 175 °C

... weld ends available Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 1/4"~1"; 800psi (56kg/cm2) for 1-1/4"~2"; 600psi (42kg/cm2) for 2-1/2"~4" Valves ...

DN: 8 mm - 100 mm
Pressure: 600, 1,000, 800 psi
Temperature: -5 °C - 175 °C

... 316 Connection Type: Long butt weld ends Locking Device: Valve operated locking in open or closed position Blow-Out Proof Stem & Solid Bail Working Temperature Limited: -20℉~350℉ (-5℃~175℃) Valves inspected and tested ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 1,500 bar
Temperature: 0 °C - 150 °C

... failure that is found in a twopiece stem design. Ball seats are made of Torlon material providing excellent sealing capabilities with low handle operating torque. Re-torqueable seat glands provide longer valve life and ...

DN: 0.18 in - 0.5 in
Pressure: 0 bar - 1,500 bar

... rotating Switching Ball Valve is designed to have fluid enter in through the bottom connection and can be switched to either side connection. Also, the valve can be closed in the center “Off” position. The ...

DN: 90 mm
Pressure: 4 bar - 8 bar
Temperature: -20 °C - 80 °C

... Slow fill processes for compact filling stations • Hydrogen filling of two-wheelers • Pressure release of dispenser filling hoses ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / PEEK / VITON Cover - Nylon Glass-Filled (Corrosion résistive) with SS Liner Plate - NBR / VITON Life - Three Million Cycle Tested Other Technical Data - Available on Request - Adjust ...

... The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other hand is a 1" ...

DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C

... BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 ...

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...

DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C

... 1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...

... The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off controlled electric ...

Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C

... T-EAV902 series 3/2 way ball valves are actuated by electric current and have a tough AISI 316 stainless-steel build, available in versions including electric-actuated with on-off control and electric-actuated with proportional ...

... , with standard production and high quality. The ball valve does not need adjustments. The wrench over the handle is used for removing the ball. It also has a reversible engine and ISO5211 standard valve ...

DN: 6.35 mm - 76.2 mm
Pressure: 0 bar - 68.9 bar

... -Piece ball valve Series 28 for isolation and flow control in industrial fluid systems. Fitted with PTFE/RTFE seats and a two-piece body for simplified maintenance access.

Specifications

• Product

DN: 6.35 mm - 101.6 mm
Pressure: 20.7 bar - 69 bar

...
Compare all 144 models of the MARS® Series 33 — sizes, specifications and UK prices. Series 33 is a family of MARS® ball valves offered with multiple end connections, port options, handle options and pressure ratings ...

DN: 6.35 mm - 50.8 mm
Pressure: 55.2 bar

... Overview
Two-piece ball valves for industrial fluid control. The MARS Series 10-10 comprises 48 model variants combining multiple sizes, end connections and locking options. All listed variants are rated at ...

DN: 0 mm - 10,000 mm
Pressure: 20,000 psi

... Product overview
The Hiflux ball-med-20k is a high-pressure ball valve engineered for industrial systems requiring reliable shut-off and accurate flow control. Suitable for both liquids and ...

DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min

... It’s a Protection System with ribbon coil: déflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery compilant. - ...

DN: 3, 2 in
Pressure: 100 mbar - 4,000 mbar
Temperature: -20 °C - 40 °C

... process needs operator supervisor. -Where liquid is not clear a strainer before the valve is strongly recommended in order to guarantee a proper working of the valve. Dirty partie les in fact may damage the moving components ...

DN: 63 mm - 100 mm

... Inline manual ball valve for ISO-K flanges, designed to ensure handling and sealing in vacuum applications. The product is available in multiple sizes (DN) with AISI 304 flanges and variants with Teflon® (PTFE) seals.

Available ...

DN: 10 mm - 50 mm

... Manual inline ball valve equipped with AISI 304 flanges and Teflon® seals. Natural finish.

Main details

• Line: KF
• Line type: KF
• Product type: Valves
• Finish:

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C

... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...

DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... • Step of the ball in T or L • Hand lever or with pneumatic actuator or with electric motor 230V / 24V • Gluing, soldering or socket connections, with DIN / ANSI flange, threaded BSP or NPT Advantage Seat, torus and ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball ...

Pressure: 0 bar - 16 bar

... excellent energy saving performance. The average ROI is only 6 months! Super Trap series use motorized stainless steel ball valves. Durable materials are selected to ensure product quality and effectively maintain ...