AIR Logic air valves

DN: 100, 150, 125, 200, 160 mm

Description Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM.

DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F

Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...

DN: 32 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C

... durability in steam and aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves ...

DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C

... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...

Pressure: 95, 90, 85 psi
Flow rate: 7 ft³/min - 15 ft³/min

ACV Air Control Valve The Clemco air control valve (ACV) allows the blast operator to control the volume of air to the Clemco high-pressure Type CE, ...

DN: 0.5 in
Pressure: 20, 35, 25, 30 psi

... pressure. Each valve is factory tested to ensure positive leak-free performance. Features and Benefits: • Optional inlet strainer • Design working pressure for the ORD valves is 680 psi (46.8 bar) Applications: • ...

DN: 15 mm - 50 mm
Pressure: 0.9 MPa
Temperature: 100 °C

Technologically advanced pressure reducing valve for accurate control in compressed air systems. Supplies Air at Stable Pressure Accuracy of pressure reducing valve's ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C

... . Read this instruction carefully before installation, and check valve type, size and technical parameters. 2. It is strictly forbidden to Weld flanges after installing valves. The valve ...

DN: 0.125 in - 1 in
Pressure: 41.4 bar

... gas ball valve is recommended for use with indoor gas appliance service. The two-piece valve meets the standards for indoor gas appliance connections, and is certified for use with natural, manufactured, ...

DN: 600 mm - 1,800 mm
Pressure: 10 bar
Temperature: -40 °C - 160 °C

A heavy duty double flanged concentric design resilient seated butterfly valve These valves are for water or air service where a drop-tight shut-off and double flanged body are required.

DN: 40, 63, 100, 160, 200 mm
Pressure: 4 bar - 8 bar
Temperature: 0 °C - 300 °C

Used as sector valve in storage rings of synchrotrons and particle accelerators. The special RF aperture minimizes the RF resistance in open valve position and provides electrical contact between the ...

... fracture of the pipeline. Automatic air admission for larger pipelines Large cross section for maximum air inlet Coated with EKB Design and dimensioning depending on working conditions Additional TWIN-AIR ...

DN: 127 mm
Pressure: 5 bar
Temperature: -40 °C - 246 °C

The newly released 7001 series Air Intake Shut-off valve was designed for the wear and tear of the frac industry. The valve will effectively shut down a runaway diesel engine by closing ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC ...

DN: 100 mm - 300 mm

Pipe regulator gates Press formed, fully seam welded and complete with lipped ends, manually operated pipe regulator gates are designed for use with granular product within an angled free fall pipeline Only for granular products ...

DN: 10 mm
Flow rate: 0 m³/h - 1 m³/h

PRODUAL NV2 series terminal control valves are mainly used for heating and cooling applications in HVAC automation systems. They contain PRODUAL thermal actuators and inner ISO 7/1 and outer ISO 228/1 thread mountings, ...

DN: 0.125, 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

Quick exhaust valve enabling high purge speeds to be reached (valve technology) directly on the wiring circuit or cylinder supply port.

DN: 0.5, 0.75 in
Pressure: 10 bar
Temperature: 75 °C

... vertical flame tests. For these reasons, Halar is considered one of the most durable and versatile thermoplastics used in valves and piping systems. Applications ranging from the harshest of chemicals to the purest ...

... pilot-controlled. modulating valve. It is designed to maintain a constant pressure differenlial between any two pressure points ina System where the closing of the valve directly causes the differenlial ...

DN: 6 mm - 12 mm
Pressure: 40, 50, 45 bar
Temperature: 60 °C

designated for control of quick-acting valves – design including or without regulating valve – suitable for single or double acting operating – meets all tests for use in nuclear energetics – medium ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... include high tensile type 316 stainless steel for the valve body and hardened 17-4PH stainless steel lower section stem. Air operators for remote control operation are available for all valves. ...

Single Loop control valve with pressure ranges from vacuum to 300 psig Small and compact package Standard 0-10Vdc analog monitor output, 4-20mA optional IP65 Housing Proportion-Air's most ...

DN: 0.5 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F

... Actuators to Valves For Food and General Chemical Service Applications Adjustable Stem Packing Blow-Out Proof Stem Design In-Line Repairable Available In Stainless Steel Body Construction ...

DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C

Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 100 °C

The Siral 3VT- 2000 series is an array of ball valves that can deliver pressure of up to 16 bar in thermal range of up to 100 °C. These ball valves have 3 "T" female threads that measures 1/4" up to 2". ...