Pressure: 0.5 bar - 8 bar
Orifice diameter: 1 in
Temperature: 0 °C - 50 °C
pressure-control-valve 1" Inch made of plastic polyamid female thread seal NBR for air, set pressure 0.5 - 8.0 bar design: - straightway form installation position: - only in vertical position product ...
Pressure: 0 psi - 1,000 psi
... cardboard box Body burst pressure up to 4350 PSI These regulators are intended for primary pressure control on non-corrosive, high purity or liquefied gases ...
Series 5D pressure keeping valves are used to eliminate overpressures due to operation or due to the system. It eliminates pressure peaks by relieving the system if the set pressure is ...
Pressure: 0 bar - 16 bar
Flow: 900 l/min
... and black knob). * Lockable safety knob. * Pressure ranges: 0÷2 Bar, 0÷4 Bar, 0÷8 Bar (standard), 0÷12,5 Bar 0÷0,2 MPa, 0÷0,4 MPa, 0÷0,8 MPa (standard), 0÷1,25 MPa * Maximum inlet pressure: ...
Aircomp by Stampotecnica
Flow: 4 l/h - 200 l/h
Gas flowmeters are gas flow indicators applied in a gas chlorination system to regulate the flow. General Differential pressure regulators are designed ...
Pressure: 0 psi - 5 psi
... stable air pressure put into the inlet in the die to control the ID inner diameter of the tube. Range are available from 0-3" of water up to the maximum of 0-5 psi. Meters are available in psi, inches ...
On Line Controls, Inc.
Pressure: 0 psi - 20,000 psi
Temperature: 0 °C - 49 °C
The NuQuip® Model PR Series Pressure Regulator is a pressure reducing device utilizing an air actuator for precise control of high pressures. These regulators ...
Pressure: 0.35 bar - 1.4 bar
Designed to reduce first stage pressure 5-20 PSIG (.035- 1.4 bar) down to a pressure higher than 11” W.C (28 mbar), the actual pressure setting is specified in the table below. Ideal ...
Rego Europe
Pressure: 0 bar - 50 bar
Maximal inlet pressure (bar) : 50 Outlet pressure (bar) : 0.5 - 12 Maximum discharge (nm3/h) : 400 Gas compatibility : Non corrosive gas + O2 and C2H2 and propane and butane
Cahouet
Pressure: 2 psi - 450 psi
... maintain an constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. The Mark 64 provides the ...
JORDAN VALVE
ARAG® Manual Pressure Regulating Valves Bypasses the excess liquid and maintains constant line pressure.
Pressure: 5 bar - 50 bar
The new Material Pressure Regulator MDR-LW04 is used to reduce pressures and to minimise the pulsation which occurs when material is conveyed using piston pumps. The working pressure ...
Pressure: 0 bar - 18 bar
Flow: 400 l/min - 800 l/min
Temperature: 0 °C - 60 °C
In-line pressure regulators F/F tared without relieving - RPL series Materials and components : - zinc body - other parts: brass, NBR, stainless steel Application range: compressed air - maximum ...
SENGA
Pressure: 12 bar
Temperature: 60 °C
Maximum pressure: 12 Bars Maximum temperature: 60°C Filter element: Available
Pressure: 15 bar
Flow: 50 m³/h
Orifice diameter: 25 mm
... sources, by use of medium itself pressure as motive power, it can automatically control and stabilize the medium pressure.This valve has high regulating accuracy . It is mainly used for ...
Item Name: R072N Item Number: Preset In-Line Regulator
Hui Bao Enterprise
Pressure: 1.5 bar - 50 bar
Flow: 0.2 m³/h - 30 m³/h
Orifice diameter: 0.13 in
Key advantages - This single stage regulator is based on the Cartridge seat Technology - Compact, ergonomic and lightweight design - Accurate pressure control for reliable service - ...
Rotarex
Pressure: 0 bar - 10 bar
Flow: 650 l/min
... manufactured by Hyongye company. It is a pressure regulator with an inlet and an outlet connection. It is applicable on various areas such as research laboratories, laser gas systems, ...
Xuzhou Hongye Apparatus & Instrument Co.,LTD
Pressure: 0 bar - 12 bar
Orifice diameter: 0.25 in
Aluminum body. Inlet 1/4" female and outlet 1/4" female with 1 gauge Ø 40 mm. 0-12 bar
F.lli GHIOTTO snc
Pressure: 250 bar
... in one pressure regulator exclusively designed and built to facilitate and support both high pressure misting systems and wide range of high pressure based applications. ...
... be distributed at high pressure as it has low volume and impacts the inventory and its cost. At the same time it should be used at low pressure, as it has high latent heat at low pressure ...
Regulators Warnings Propane/Propylene (Mapp-Style) Part No. EP-45-G Heavy Brass Construction Adjustable Pressure CGA510 to "B" Hose Ftg Used with Propane or Mapp-Style gasses
Goss Products
Pressure: 0 psi - 150 psi
- For maintaining constant pressure - Preassembled for fast installation - Increased operating reliability - Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems ...
Pressure: 0.05 bar - 12 bar
Flow: 0 m³/h - 2,700 m³/h
Orifice diameter: 0.5, 0.25 in
The EPP4 family is an electro pneumatic pressure regulator. The COMFORT range regulators have a second M12 connector that can be used to connect the device to a PC to easily configure ...
Please specify:
Help us improve:
remaining