AMF cylinders

Stroke : 8 mm - 20 mm
Force: 5 kN - 32 kN

... fixtures for hydraulic actuation. When workpieces are clamped onto a machine tool table, the hollow rod cylinder can be fitted over the clamp bolt instead of the nut. The hollow rod cylinders can be used ...

Stroke : 8 mm - 25 mm
Force: 2 kN - 155.5 kN

... Cylinder barrel from steel, burnished. Piston and piston rod case hardened and ground. Wiper at piston rod. Piston rod with internal thread. Oil supply via threaded port. Universal mounting by means of mounting holes. Each cylinder ...

Stroke : 25.5 mm - 51 mm
Force: 5.9 kN - 17.5 kN

... Cylinder barrel from steel, hardened and burnished. Piston rod hardened and chrome plated. Piston rod with internal thread. Wiper at piston rod. Oil supply via threaded port. Universal pull cylinder for various applications. Piston ...

Stroke : 14.5 mm - 29.5 mm
Force: 2.2 kN - 27.7 kN

... fixture body. Universal Push-Pull Cylinder for various applications. Each cylinder size is available for single or double-acting operation. Various thrust pieces can be attached in the tapped piston rod ends. Clamps ...

Force: 4 kN - 10 kN

... Centring clamp MINI with two clamping points Double-acting, max. operating pressure 250 bar, min. operating pressure 10 bar. Double-acting centring clamp with two clamping points. All components from high-grade hardened and nitrided steel. Oil ...

Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 30 Nm

... advances with a weak spring-applied force against the inserted workpiece. The spring force varies with the pin stroke. As the hydraulic pressure rises, the support pin is hydraulically clamped. When the pressure is released, the support ...

Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 80 Nm

... advances with a weak spring-applied force against the inserted workpiece. The spring force varies with the pin stroke. As the hydraulic pressure rises, the support pin is hydraulically clamped. When the pressure is released, the support ...