B&R analog I/O modules
The slide-in module for analogue input is designed to record voltages of -10 to +10 V and current signals of 0/4 to 20 mA. Laboratory apparatus, such as thermostats, mixers or measuring sensors, can be ...
HiTec Zang GmbH
This slide-in module controls laboratory apparatus with analogue voltage or current inputs for control and regulation purposes. The module uses four 6-pin Tuchel sockets according ...
HiTec Zang GmbH
The RTD-P high-precision measuring module has been developed for applications which place extremely high demands on resolution and measuring accuracy. The RTD-P modules have an extremely accurate analogue-to-digital ...
HiTec Zang GmbH
The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions ...
METZ CONNECT
The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via ...
METZ CONNECT
The Modbus module with 4 analog outputs was developed for decentralized switching tasks. It is suitable as encoder for control variables, for example for electrical vent and mixing valves, valve positions, ...
METZ CONNECT
... ASi-5 address Technical data Number of IO-Link Ports - 4 IO-Link Port Class A - configurable conectors IO-Link Port Class B - configurable conectors Inputs/outputs - 4 x C/Q ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process ...
15 ch. Analogue in, Analogue inputs for 4-20 mA signals, P-NET via Light-Link, Programmable in COPP • Analogue inputs for 4-20 mA signals • Programmable in COPP • P-NET via Light-Link • ...
PROCES-DATA A/S
The “TES” modules are Slave Modbus Remote Output Terminals on a RS485 network. Their implementation is very fast with the TESIS workbench. Numerous internal functions are pre-programmed, The Modbus communication ...
ELPRO Condor 415U-2 I/O Gateway now supports IoT with MQTT and Sparkplug gateway for local inputs/outputs and external devices. The latest Condor Series IoT I/O Gateway now includes support for MQTT ...
ELPRO Technologies
The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog ...
The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital ...
... J1939" The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. ...
... real-time communication with each module. It is characterized by an agile topology and has a wide range of functions (discrete I/O, analog I/O, counters, etc). Thanks ...
... Central, using local I/O bus of CPU module. Up to ten I/O modules can be connected to the CPU. Decentralized periphery via fieldbus between CPU module ...
ABB Automation Products GmbH
... and Serial. The parallel modules (I-8K Series) are high-speed modules and support MCU (Main Control Unit) only. The serial modules (I-87K Series) can support either MCU or I/O ...
... mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is available with a second V/mA analog ...
... programmable I/O device server The BARIONET 1000 / 1xxx is a Linux/Open- WRT based universal, fully programmable I/O device server. I/O interfaces include two USB host interfaces, WiFi ...
Barix
Grayhill offers I/O modules in the industry standard sizes of mini, standard and G5. Grayhill also offers its unique Open-Line style I/O module that offers two input/output ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O ...
... from system: 500 V Condensation-proof ColdClimate design The GIO212 is a module that can measure and output various types of signals. Each channel can be used as analog or digital output or input. ...
BACHMANN
... safety. All of the I/O module’s transmission channels are conductively connected to each other. The ANTARES 8AI Remote I/O Module is operated by and supplied with power ...
BARTEC
CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.
... Build in Analog Inputs Input Impedance - PT-100 0/4-20mA 0-10V 0-50mV -200oC-650oC 100ohm >6.6kohm >10Mohm Galvanic Isolation - None Resolution - 14 Bit Accuracy - ±0,25% Sampling Time - 250 ms Status Indication ...
The Ethernet system for pressure measurement MSX-E3311 has 16/8 differential inputs, 24 bit, for the connection of straing gauges and a digital trigger input, 24 V. Up to 8 channels can be acquired simultaneously. The system was developped ...
Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital ...
8 Channels Differential Analog Input I/O Module ● 8 Channels differential Analog input ● Support voltage, current, thermocouple input ● Support over voltage protection ● ...
... Isolated Analog Input EtherCAT Slave I/O Module ● Standard EtherCAT Slave ● 8 Channels differential Analog Input ● 2 x RJ45 Ethernet Interface ● Support Daisy Chain ...
> Inputs: 8 PNP, 24V 20mA > Outputs: 4 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 4 PNP, 24V 20mA > Outputs: 8 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical Insulation: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 12 PNP, 24V 20mA > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 2V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ...
ELCO Elettronica di A. Ligabue e C. snc
The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To ...
ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6802 is 8 channels remote IO controller launched by Shanghai ZLAN after ZLAN6042. The controlled channels from 4 channels of 6042 extending to 8 channels, including 8 channels Digital Input(DI), Digital Output(DO), ...
Shanghai ZLAN Information Technology Co.,Ltd
... contains a versatile set of I/O channels and a Ethernet interface with different communcation stacks: 32 bit controller 4 digital in/out channels 16 digital input channels (6 digital inputs optionally used as code ...
... The analog inputs can be used for voltage (±10 V), current (±20 mA) or resistive measure-ments (10Ω…5kΩ). All I/O channels, digital and analog, are galvanically isolated from the internal ...
... indication of OK and reset is shown via LEDs on the front panel. Compact and Cost Saving All I/O functions are located on one board and provided via one rugged I/O connector. This lowers the number ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining