Grayhill offers I/O modules in the industry standard sizes of mini, standard and G5. Grayhill also offers its unique Open-Line style I/O module that offers two input/output points per snap-in module. This not only saves space but also offers quick and ...
The Ethernet system for pressure measurement MSX-E3311 has 16/8 differential inputs, 24 bit, for the connection of straing gauges and a digital trigger input, 24 V. Up to 8 channels can be acquired simultaneously. The system was developped for the acquisition ...
... NXI-5100 series high density programmable resistance card programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, the flexible ...
... Industrial IoT Remote I/O • - Access data through Modbus/TCP/RTU/ASCII • - Supports MQTT for IIoT applications • - 2 x redundant LAN ports • - Support for MQTT Security over TLS • - Optional WiFI version with Client mode • - Up to 20 x different ...
... The “TES” modules are Slave Modbus Remote Output Terminals on a RS485 network. Their implementation is very fast with the TESIS workbench. Numerous internal functions are pre-programmed, The Modbus communication mapping is predefined. Designed ...
... TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general remote Ethernet IO monitoring and control. The device ...
Teracom
... ELPRO Condor 415U-2 I/O Gateway now supports IoT with MQTT and Sparkplug gateway for local inputs/outputs and external devices. The latest Condor Series IoT I/O Gateway now includes support for MQTT and Sparkplug allowing IoT connectivity directly ...
ELPRO Technologies
I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer, computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 ...
... The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is ...
... DeviceNet Analog Remote I/O (Terminal Block Type) The ARD-A series analog remote I/O units provide input/output expansion and communication for various devices using DeviceNet protocols. The ARD-A series provides high measurement accuracy and excellent ...
... Pluggable I/O Module for FP2 and FP4 Series Features Power from HMI Nominal Input Voltage 24VDC 2 pair High Speed Inputs 200KHz Nominal Output Voltage (PNP) 24VDC) Nominal Output Current 250mA @ 24VDC for PNP, 2A @ 230VAC ...
Renu Electronics GmbH
... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...
SIGMATEK GmbH & Co KG
The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling up to 6 ...
... LonWorks Network The LON (Local Operating Network) technology is a network control system developed by Echelon, USA. The LON technology is an intelligent, distributed network for communication with various sensors and actuators at a maximum of 32,385 ...
... Unit that converts 1 CH of IO-Link ports in IO-Link Master to 16-point of digital I/O Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master UR Series. Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once. Digital ...
Analogue signals are transmitted to the controller or supplied to the peripherals with the highest accuracy and interference immunity. A microcontroller converts the measured values of the analog inputs and outputs with the calibration data and passes ...
KEBA Group AG
The Syslogic USB mini card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. The analogue I/O module has a resolution of 16 ...
Besides three different digital I/O expansion modules, an analog I/O expansion module is also available. By using RevPi AIO, a Revolution Pi system is expanded by 4 analog inputs, 2 analog outputs and 2 RTD channels. Like all I/O modules RevPi AIO features ...
Revolution Pi
... Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low Voltage Digital outputs ...
... Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel Status, trigger, tare, alarm, command Signal ...
Gantner Instruments
... -Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used for local control -Built ...
The 905U and 805U simply and reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively replacing the ...
... CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density. ...
... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...
ESA elettronica
... The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto ...
Opto 22
the best suppliers