Baker Hughes stationary pumps

Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW

The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...

Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW

The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...

Flow: 57.3 l/min - 85 l/min
Pressure: 0 bar - 20 bar
Power: 0.5 kW - 3.1 kW

The 3-diaphragms pump ZETA 85 produces a flow of 85 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...

Pressure: 250, 500, 350 bar

Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws

Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...

Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...

The working principle of a centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric ...

Flow: 10 l/min

... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...

Flow: 25 l/min
Pressure: 2 bar - 6 bar
Length: 530 mm

Flow: 200, 10.5 l/min
Pressure: 4 bar
Length: 165 mm

Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW

... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Flow: 235 m³/h
Head: 68 m
Power: 30 kW

STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient hydraulics ...

Flow: 130 m³/h
Head: 42 m
Power: 11 kW

Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...

Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C

High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C

A trustworthy solution for applications requiring the highest levels of operational accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring 100% ...

Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C

Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...

Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW

... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...

Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C

The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...

Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW

The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...

Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW

The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...

Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg

The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by the optimally designed sealing ring and balance hole, the paired tapered ...

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...

Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m

Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet and exceed ISO2858 requirements. ...

Flow: 1.45 m³/h - 163 m³/h
Pressure: 9 bar - 80 bar
Fluid temperature: 85 °C - 130 °C

... contactless running of the pump elements in rotary lobe pumps opens up important perspectives: On one hand it is perfect for hygienic applications due to the complete elimination of abrasion ...

Flow: 1.4 m³/h - 60 m³/h
Pressure: 8 bar - 15 bar
Fluid temperature: 85 °C - 130 °C

... sweets iLOBE with integrated heat exchanger Small Premium Edition As an evolution of the conventional rotary lobe pump LC the iLOBE is equipped with an integrated heat exchanger ...

Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C

... flexible handling by means of lifting bows. Discharge pumps for Fluidbag and barrels A specialty of ipp Pump Products GmbH is the progressive cavity pump FLB, which as a horizontal ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...

Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm

Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...

Output diameter: 60.3 mm - 88.9 mm

... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...

Flow: 50 l/min
Pressure: 360 mbar

• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers

Power: 20 W - 400 W

• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...

Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W

... transferring a variety of water-like liquids. The drum pump motor is characterized not only by its light weight (2 and 2,3 kg) but also by its elegant design and ease of use. The non-stationary and ...

Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W

... when transferring a wide range of media. The drum pump motor is characterized not only by its light weight (2,9 kg) but also by its elegant design and ease of use. The non-stationary and stationary ...

Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W

... when transferring the wide range of media. The drum pump motor is characterized not only by its light weight (2,9 kg) but also by its elegant design and ease of use. The non-stationary and stationary ...

Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm

... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...

Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m

Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...