- Hydraulics - Pneumatics >
- Pump >
- Stationary pump
Stationary pumps
Flow: 0.6 l/min - 110 l/min
Pressure: 0.05 MPa - 0.2 MPa
Power: 1 W - 200 W
Compact air pumps featuring superior durability Features of APN series Capable of transferring clean gas The pumps in this series are of the diaphragm type and excel in airtightness. ...
IWAKI
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W
... diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm metering pumps. High ...
Walchem
Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W
... Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal ...
Walchem
Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C
... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...
Walchem
Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...
Celeros
Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and distribution District ...
Celeros
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 1,400 m³/h
Pressure: 25 bar
Head: 220 m
Standard chemical process pumps of the SIHIISOchem range are horizontal, single-stage volute casing pumps with dimensions to DIN EN ISO 2858. They meet the technical requirements of EN ISO 5199. It is ...
Flowserve SIHI Pumps
Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m
... towards the drive end, without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor. Applications: Series CBT volute casing pumps ...
Flowserve SIHI Pumps
Flow: 1,800 m³/h
Pressure: 16 bar
Head: 140 m
Pumps of the series SIHISuperNova ZLN are horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
Universal Hydraulik GmbH
Flow: 85 l/min
Head: 19 m
Power: 500 W
... •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant hose (2 M), nozzle and drum ...
Pressure: 8 bar
Fluid temperature: 100 °C
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR - 3L OUTLET THREAD ...
Delimon
Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING TEMPERATURE RANGE ...
Delimon
... kinetic energy that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, the ...
ERG Technology
Pressure: 250, 500, 350 bar
Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws
Flow: 15 l/min - 34 l/min
Pressure: 70 bar - 140 bar
Length: 19 cm
Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches ...
Stanley Infrastructure
Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
The working principle of a centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...
Flow: 25 l/min
Pressure: 2 bar - 6 bar
Length: 530 mm
Flexbimec
Flow: 200, 10.5 l/min
Pressure: 4 bar
Length: 165 mm
Flexbimec
Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW
Flexbimec
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
A trustworthy solution for applications requiring the highest levels of operational accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring 100% ...
Seko S.p.a.
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...
Seko S.p.a.
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...
Seko S.p.a.
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... of the quietest and most compact pumps in its class Available in Polypropylene, PVDF (Kynar ®), and conductive Acetal (ATEX Compliant). Conductive Acetal units can be grounded for pumping volatile ...
Versa-Matic
Flow: 0 us gal/min - 6.8 us gal/min
Weight: 1.4, 2.04 kg
Small yet powerful, Versamatic’s ⅜" (10mm) bolted plastic air-operated double-diaphragm (AODD) pump can pump up to 6.8 gpm (26 lpm). Featuring a patented air valve system, count on ...
Versa-Matic
Flow: 0 m³/h - 12 m³/h
Length: 215 mm
Width: 185.75 mm
... AODD pump, along with the ½" bolted plastic pump, features: A corrosion-resistant air section On/off reliability Durable and long-lasting construction Extended-life diaphragms ...
Versa-Matic
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by the optimally designed sealing ring and balance hole, the paired tapered ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet and exceed ISO2858 requirements. ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1.45 m³/h - 163 m³/h
Pressure: 9 bar - 80 bar
Fluid temperature: 85 °C - 130 °C
... contactless running of the pump elements in rotary lobe pumps opens up important perspectives: On one hand it is perfect for hygienic applications due to the complete elimination of abrasion ...
Flow: 1.4 m³/h - 60 m³/h
Pressure: 8 bar - 15 bar
Fluid temperature: 85 °C - 130 °C
... sweets iLOBE with integrated heat exchanger Small Premium Edition As an evolution of the conventional rotary lobe pump LC the iLOBE is equipped with an integrated heat exchanger ...
Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C
... flexible handling by means of lifting bows. Discharge pumps for Fluidbag and barrels A specialty of ipp Pump Products GmbH is the progressive cavity pump FLB, which as a horizontal ...
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...
Output diameter: 60.3 mm - 88.9 mm
... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining