Stationary pumps

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... on request.

• Pump type: single- or multi-stage centrifugal pump with permanent

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... Description The HZMAB is a single- or multistage cantilever centrifugal pump with magnetic coupling and axial suction nozzle. The pump features a permanent magnetic coupling; the containment shell hermetically ...

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... >
The HZSMAR is a single- or multi-stage sectional pump equipped with a magnetic coupling and a side-channel (vessel) gas-handling stage. The gas-handling device operates on the side-channel pump principle: during ...

Flow: 0 m³/h - 100 m³/h
Power: 30 kW

... Basic version The EL30 is an electric pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum ...

Flow: 0 m³/h - 80 m³/h
Head: 0 m - 14 m
Power: 3.7, 5, 4.5, 6 kW

... The EL5 is an electric pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum efficiency and ...

Flow: 0 m³/h - 100 m³/h
Head: 0 m - 21 m
Power: 5.5 kW - 14 kW

... The EL7.5 is an electric pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum efficiency ...

Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW

... ZPD external gear dosing pump
Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

... ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based on fluid viscosities ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

... External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact with bearings ...

Flow: 300 m³/h - 86,400 m³/h
Power: 0.55 kW - 37 kW
Fluid temperature: -20 °C - 200 °C

... MATERIAL FEEDING PUMP
The medium viscosity can reach 1,000,000CP fed by this pump


2.THIN MEDIUM FEEDING PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...

Flow: 0.3 m³/h - 86.4 m³/h
Power: 5.5 kW
Input diameter: 25 mm - 150 mm

... MATERIAL FEEDING PUMP
The medium viscosity can reach 1,000,000CP fed by this pump




2.THIN MEDIUM FEEDING PUMP
If the viscosity of the fed medium descends and leakage increases, ...

Flow: 180 l/h - 30,000 l/h
Power: 1.5 kW - 15 kW

... The sine pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...

Flow: 0.1 m³/h - 200 m³/h

Small size standardised models help to keep your production areas dry and clean. Use our Liquid-Conveyors for the easy and reliable suction and disposal of various liquids like oil or emulsion and even greasy substances. Our units can filter the liquids ...

... AC pump Pump: for lifting up and down the equipment ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

... Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical seal - - SiC O-rings - - Viton Optional: ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

... Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline ...

Pressure: 6.3 bar
Head: 25, 41 m
Output diameter: 65 mm

... The Rami Yokota BV YP-18 is a sump pump made from bronze, to pump aggressive fluids such as sea water. It can accommodate maximum capacity of 55 t/h and can exhibit maximum air pressure of 6.3 bar. Furthermore, its bronze ...

Flow: 0 l/min - 450 l/min
Head: 0 m - 32.5 m
Power: 1.1 kW - 2.2 kW

... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...

Flow: 12 m³/h
Head: 230 m
Power: 0.75 ch - 1.5 ch

... install expensive filters or shielded cables to avoid damaging the motor, as the inverter is integrated. Features pumps with pump body, delivery, integrated non-return valve in Aisi 304 stainless steel impellers ...

Flow: 100, 140, 220 l/min
Power: 0.37 kW - 2.2 kW

... Newly designed 5″ monobloc submersible pumps for domestic / civil or small industrial applications (distribution or withdrawal of water from wells or collection tanks, irrigation, drip irrigation, pressure increase, washing ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Power: 7 W - 32 W

... precision laboratories that meet the CNAS national laboratory accreditation standards ♦ More than 60+ patents in the micro water pump industry, strong research and development strength, and master advanced industry technology ♦ ...

Flow: 8 l/h - 12 l/h
Pressure: 0.6 bar - 0.8 bar
Fluid temperature: -40 °C - 100 °C

... function • Long service life aided by liquid cooled electronics and DC brushless design giving service life >20,000 hours • Compact and low noise characteristics. • IP68 • Protection Function: Blocked-Protection，Polarity Protection ...

Flow: 4.5 l/min
Pressure: 130,000 Pa
Fluid temperature: 5 °C - 70 °C

... offer multiple component configurations allowing them to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates ...

Flow: 0.001 m³/h - 0.0084 m³/h
Fluid temperature: 0 °C - 40 °C
Weight: 90 g

... - Power supply voltage: 6, 12, 24 V - Silent - Compact size - Easy to maintain - Long lifespan - Suitable for transporting viscous and non-viscous liquids - Application examples: washing robot, vacuum robot, etc. Flow ...

Flow: 0.0052 l/min - 0.09 l/min
Fluid temperature: 0 °C - 40 °C
Weight: 0.11 kg

... Main Functions: - Flow Rate: 5.2-90 ml/min - Motor: DC - Power Supply Voltage: 3, 6, 12, 24 V - Quiet operation - Compact size - Easy maintenance - Long lifespan Specifications: - Flow Rate (ml/min): 5.2-90 - Motor: DC - Power Supply ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

... The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically ...

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed for handling ...

Flow: 0 l/h - 0.0144 l/h
Pressure: 0 bar - 80 bar

... The GMK-B piston pump – now available in new designs and with additional reservoir variants – offers an optimal solution for the requirements of the automation industry thanks to its intelligent control board and the “Smart 2 Cycle” variant. It ...

Pressure: 0 bar - 60 bar

... Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 Number of outlets: 1...4 Tank size in l: 0,7 ...

Pressure: 0 bar - 60 bar

... Delivery Pump for Grease Medium: grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 Number of outlets: 1...4 Tank size in l: 0,4 ...

Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to ...

Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...

Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...

... ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These ...

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation o No pump ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive Frictionless ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System to activate, ...

Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW

... STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...

Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW

... PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for ...

Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW

... SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous uses in various ...

Flow: 0.003 l/min
Pressure: 150 mbar
Weight: 40 g

... mechanisms, and thus minimal vibrations and fewer breakdowns. The Bimor is lighter, quieter and more durable than traditional pumps. We have achieved maintenance free continuous operation for 60 months. Low power consumption & electromagnetic ...

Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands then contracts while ...

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

... The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. It can operate ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

... High efficiency IE3 electric pump VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock ...

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

... High efficiency IE3 electric pump Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks ...

Flow: 244 l/s - 281.2 l/s
Head: 1 m - 82.7 m
Power: 3 kW - 45 kW

... High efficiency IE3 electric pump Cast iron impeller with Molib-tech treatment™ / Chopper sistem able to cut particles of any shape of proportion Liquids containing solid parts and fibres Suitable for sewage, lifting of not strained ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...

Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 200 °C

... The ADP is a high precision external gear metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations e.g. high pressure together ...

Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical ...

Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical ...

Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical ...