Stationary pumps

Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW

... STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...

Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW

... PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for ...

Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW

... SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous uses in various ...

Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW

... ZPD external gear dosing pump
Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

... ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based on fluid viscosities ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

... External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact with bearings ...

Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical ...

Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical ...

Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W

... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical ...

Flow: 0.1 m³/h - 200 m³/h

Small size standardised models help to keep your production areas dry and clean. Use our Liquid-Conveyors for the easy and reliable suction and disposal of various liquids like oil or emulsion and even greasy substances. Our units can filter the liquids ...

Flow: 0 l/min - 5.5 l/min
Power: 0.18 kW
Weight: 1.2 kg

... Product Details - Name: KN39 MINI DC-24V - Type: DC 24V - Absorbed Power (P1): 0.18 kW - Connection: 1/8" BSPP - Maximum Flow Rate (Qmax) at 5500 rpm: 5.5 - Maximum Head (Hmax) at 5500 rpm: 55 Characteristics - Suitable for clear waters/oils ...

Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m

... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures ...

Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m

... Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining circulating pressures at medium-low hydraulic ...

Flow: 873.6 m³/h
Head: 7.9 m
Power: 23 kW - 26.5 kW

... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...

Flow: 948.8, 1,465.3 m³/h
Head: 32.8, 26 m
Power: 118 kW - 122.7 kW

... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...

Flow: 1,088.5 m³/h
Head: 11 m
Power: 43 kW - 45.5 kW

... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

... Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical seal - - SiC O-rings - - Viton Optional: ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

... Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline ...

Flow: 3.6 l/h
Pressure: 0 bar - 20 bar

... Flow Rates: 0.625 µl/min - 60mL/min Pressure: Up to 20 bar Material: Glass syringe with PCTFE Applications: Grignard chemistry, lithiation reactions, other orgnometallic reactions, etc. Can handle corrosive chemicals Pulseless and continuous ...

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

... SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • Easy cleaning ...

Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm

... picoliters per minute to 121.51 milliliters per minute. Whether handling small volumes with a Hamilton 0.5 μl syringe or larger volumes with a 140 ml Monoject Syringe, this pump delivers consistent and accurate flow ...

Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm

... The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers ...

Flow: 0.01789 l/min - 0.12151 l/min
Fluid temperature: -30 °C - 85 °C
Length: 170 mm

... The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance ...

Flow: 0 m³/h - 13.2 m³/h
Pressure: 0 bar - 8 bar
Head: 2 m - 8 m

... operated diaphragm pump is an environmentally friendly alternative to the traditional air-operated diaphragm pump. It is designed for gentle pumping of the most aggressive media, including those containing abrasive particles. This ...

Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW

... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...

Flow: 60, 125, 330, 570 m³/h
Pressure: 8 bar
Head: 0 m - 80 m

... required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were turned down to much lower air pressure in an attempt to save energy, the ...

Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to ...

Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...

Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be fitted to the air ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... inverter allows 4HS to: Change pump speed to maintain set-pressure regardless of water demand. Consequently the pump is operated only when and as needed without wasting energy, thereby extending pump ...

Flow: 0 m³/h - 18 m³/h
Pressure: 3 bar
Head: 2.5 m

... is the Nastec range of solar pumps for the circulation and filtering of pool water. It guarantees: Energy saving thanks to photovoltaic energy supply and variable-speed operation. Quick and simplified installation thanks to the electronics ...

Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W

... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump provides ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, China University ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... and corrosion conditions. 　　Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. There are also various impeller ...

Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m

... 　　TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, ...

Flow: 0.003 l/min
Pressure: 150 mbar
Weight: 40 g

... mechanisms, and thus minimal vibrations and fewer breakdowns. The Bimor is lighter, quieter and more durable than traditional pumps. We have achieved maintenance free continuous operation for 60 months. Low power consumption & electromagnetic ...

Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands then contracts while ...

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

... The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. It can operate ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

... The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase ...

Pressure: 0.4 bar - 2.5 bar

... Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum and pressure ...

Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C

... capacities, power: 115 V/60 Hz or 230 V/50 Hz The compact diaphragm pumps type N3/5/9 are suitable for sampling air, gases and vapours in a temperature range between + 5 °C and + 40 °C. The construction and the pump ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

... - Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material of sample-contacting ...

Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm

... High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service. Applications - ...

Flow: 180 l/s
Pressure: 16 bar
Head: 100 m

... Turo® Vortex TA impeller for pumping of raw municipal sewage with a high content of fibers without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content ...

Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m

... The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids in the chemical ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar

... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes 0 6mm on the rear of the pump. Delivered with connecting block G1/4DD Drive shaft diameter :0 12mm with a 4mm key Drive shaft height ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar

... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive shaft height ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar

... depending on the product involved Standard rotation :Clockwise rotation (A) =Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive shaft height ...

Flow: 4.2 l/min
Pressure: 264 bar

... Optimum spraying results due to low pressure fluctuations Robust unit with few wearing parts and simple assembly and disassembly Minimalist design: all operating elements positioned on the front and thus quickly accessible The WIWA EFFECTIVE for ...

Pressure: 8 bar - 240 bar
Weight: 23 kg

... materials Easy operation and maintenance of the unit Fast start-up of the pump with very low air input Easy handling. The WIWA INJECT HD 4 and HD 5 are pneumatic 1K piston pumps characterized by large output and ...

Pressure: 120 bar
Weight: 26 kg

... WIWA INJECT 2K 14015 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor so that mixing errors cannot occur due to the positive control. The compact ...

Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 200 °C

... The ADP is a high precision external gear metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations e.g. high pressure together ...

Flow: 3.25 l/min - 4.35 l/min
Pressure: 0 psi - 70 psi
Fluid temperature: 25 °C

... LEFOO LFP6115T Series On Demand Delivery Pump (product datasheet).

Characteristics / Technical specifications

• Model: LFP6115T
• Commercial denomination: 230VAC Demand Delivery Pump
• Brand:

Flow: 2.31 l/min - 3.22 l/min
Pressure: 0 psi - 70 psi
Fluid temperature: 25 °C