Flow: 0.252, 0.186 m³/h
Pressure: 4,000 bar
Power: 30, 22 kW
... martensitic stainless steel
pump parts, ceramic plungers and PEEK seals engineered for abrasive duty.
Technical specifications
- Product family: Direct Servo Drive 4000 Pump (Next-gen 4000-bar waterjet
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal ...
Pompes Japy
Flow: 2.7, 1.3, 2, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, NBR flange O-ring. Specifications ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
... Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval Waterproofing: ...
Pompes Japy
Flow: 9.3 m³/h - 37.2 m³/h
Pressure: 8 MPa - 35 MPa
Power: 110 kW - 200 kW
... high-pressure pumps are high-flow plunger pumps that absorb the technology of imported products and use finite element to check carefully. The liquid ends can be equipped with a valve disc structure or a conical valve ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large high-pressure pump ...
Tinajin Harvest
Flow: 25 l/min - 195 l/min
Pressure: 8 MPa - 80 MPa
Power: 30 kW - 90 kW
... high-pressure pump is an improved product of the 3D2-S high-pressure pump. Its characteristics are: First, the capacity of the lubricating oil in the crankcase increases, the lubricity is improved, and the lubricating ...
Tinajin Harvest
Flow: 300 m³/h - 86,400 m³/h
Power: 0.55 kW - 37 kW
Fluid temperature: -20 °C - 200 °C
... MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0.3 m³/h - 86.4 m³/h
Power: 5.5 kW
Input diameter: 25 mm - 150 mm
... MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 180 l/h - 30,000 l/h
Power: 1.5 kW - 15 kW
... The sine
pump is composed of special rotors and is used for transporting high-viscosity materials with easily granular components, such as yogurt with fruit pulp, granular sauces, and so on.
A gate functions as a seal between the inlet ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0 m³/h - 960 m³/h
Pressure: 9.8 bar
Head: 0 m - 80 m
... 1. The motor and pump are coaxial conjoined for eliminating fluctuations. 2. Durable mechanical seal prevents from leakage and keeps long life. 3. Compact & robust structure for saving space and for easy installation. ...
Enfound enterprise co.,ltd
Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... 4. Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material ...
Enfound enterprise co.,ltd
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for ...
Enfound enterprise co.,ltd
Flow: 1 l/min - 2.5 l/min
Pressure: 0.5 bar - 5 bar
Power: 0.03 kW - 0.03 kW
... The MPD025 is a miniature external gear pump with a DC brushed motor. Typical materials include SS316L machined casing (304 or PPS options depending on model), PEEK gears, FKM (fluorine rubber) sealing ring and dynamic ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 1 l/min - 1.5 l/min
Pressure: 0.5 bar - 20 bar
Power: 0.07 kW
... 316L or ceramic shaft) and
pump body materials (304, 316L, PPS) allow fluid compatibility and customization.
Model Specification
Model: MPB 015 B A A A 24V 70W
Configuration digits: 1 2 3 4 5 6 7 8
1
Pump ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 15 l/min
Pressure: -0.85 bar - 10 bar
Power: 0.4 kW
... Model: MPB 150 B A D A 24V 400W
Position map (by column):
1:
Pump Series = MPB (Rubber O-Ring Seal)
2: Model/Displacement = 150 (5.4 ml/rev; maximum flow rate 10 LPM)
3:
Pump Body = A: 304; B: 316L; C: PPS; ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 3,600 l/min
Head: 0 m - 92 m
Power: 3 kW - 22 kW
... This close-coupled pumps, projected and realized following DIN 24255 (uni en 733) regulation standards, are used to pump chemically clean water without suspended solid parts in heating or cooling systems, irrigation systems, ...
STAC S.r.l.
Flow: 0 l/min - 450 l/min
Head: 0 m - 32.5 m
Power: 1.1 kW - 2.2 kW
... These pumps are suitable to be used in domestic, agricultural and industrial applications when big deliveries are requested with medium discharge head. Available also with 2″ x 2″ inlet anda outlet. ...
STAC S.r.l.
Flow: 0 l/min - 180 l/min
Head: 0 m - 92.5 m
Power: 0.75 kW - 5.5 kW
... Double-impeller pumps suitable for agricultural, domestic and industrial use where high discharge heads are requested. ...
STAC S.r.l.
Power: 1,400 W
Length: 195 mm
Width: 195 mm
... Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of magnetic alloy ...
... High Pressure hydropneumatic pumps have to make effort tests on components for high pressure. For having a pumping system able to make more than 100.000 pumping cycles in few weeks, for these pumps it ...
Flow: 15 l/min - 800 l/min
Pressure: 100 bar - 210 bar
Head: 10 m
... cinrconference of only 22 cm allows easy insertion even in narrow manholes and very small excavation sites • It can be operated by small power packs or by the hydraulic circuit of mini excavators, tractors, ...
DOA Hydraulic Tools Srl
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs or by the hydraulic circuit of mini ...
DOA Hydraulic Tools Srl
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... The pump housing can be open in few minutes without tools, for inspection of the impeller and the pumping chamber 38 L/min @ 140 Bar 30 L/min @ 140 Bar 20 L/min @ 140 Bar • Can be operated by small power packs or by ...
DOA Hydraulic Tools Srl
Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm
... CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1. ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.3 l/min
Pressure: 3, 4 bar
Head: 30 mm
... CMP30L,micro water pump,mini membrane pump,liquid micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure. Technical ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.03 l/min - 0.15 l/min
Pressure: 2, 1, 3 bar
Head: 17 mm
... CMP-17L,micro liquid pump,micro diaphragm pump,water micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure. Technical ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.00001 l/min - 0.861 l/min
... This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By simply flipping ...
Heidolph Instruments GmbH & Co. KG
Flow: 105 l/h - 54,000 l/h
Pressure: 16, 7.5 bar
Fluid temperature: 80, 90 °C
... difficult chemicals and fluids, the Abaque Peristaltic Hose pump will handle your toughest pumping needs — from abrasive and aggressive to shear-sensitive and viscous fluids. Abaque pumps currently operate in some ...
MOUVEX
Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W
... Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and we will be glad ...
Flow: 5.1 l/min - 70 l/min
Head: 4.1 m - 15 m
Power: 6 W - 72 W
... control signal type of DC brushless motor drive canned centrifugal pumps have been added. Tachometer feedback (rotation speed pulse output Note 1) is possible at the same time as the pump variable input signal. It is ...
IWAKI
Flow: 13 l/min - 21.9 l/min
Pressure: 5, 10, 15 bar
Power: 0.1 kW - 0.61 kW
... 2 diaphragms in NBR (Desmopan® or Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: pressure accumulator. On request: safety valve and PTO protection. ...
COMET Spa
Flow: 103 m³/h
Pressure: 34 bar
... The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art design ...
... range of H20 pumps available in diesel and electric versions, developed specifically for use with down-the-hole (DTH) hammers on H20 systems. Accessories such as an intake filter, pressure control and remote-capable H20-line shutoff make ...
Ripamonti Dr Gianni S.r.l
... cultures The only part of the pump in contact with the fluid being pumped is the interior of the tube or hose, making it easy to sterilise and clean the inside surfaces of the pump head A safety-cut out ensures ...
Radleys
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... systems • Temperature-controlled pump heads (-20…+130°C) • Highly flexible due to various control concepts and housing types Specifications Pump type - compact high-pressure dosing pump Delivery ...
Flow: 56, 70 l/min
... dispensers on motor vehicles and fixed dispensers in case only battery power is available. Technical specifications • - Pump body in cast iron with anti-corrosion treatment and painting. • - Support base. • - Pump ...
Pressure: -950 mbar - 140,000 mbar
... Pneumatic pressure test pump LMP 140 is a hand pump operated and designed to generate pressure range -950 mbar ... 100 /140 bar. 0,1 mbar pressure resolution. Build-in filters to protect from dirt and moisture to reduce ...
Flow: 430 l/min - 1,450 l/min
Pressure: 700 bar - 900 bar
Power: 180 kW - 700 kW
... INJECTION PUMPS High Pressure Triplex Pumps Triplex pumps can be powered by both diesel and electric motors. The high pressure motor- pumps produced by METAX have the following main ...
Flow: 106, 90 l/min
Weight: 9.09 kg
... GEMINI 88 PLUS DUAL RATE SYRINGE PUMP DUAL RATE INFUSION/WITHDRAWAL PUMP KD Scientific offers the NEW Gemini 88 Plus Dual Rate Syringe Pump. This unique pump is really two pumps ...
Flow: 60 l/min - 600 l/min
Pressure: 1 bar - 8 bar
Fluid temperature: 5 °C - 120 °C
... Pneumatic Double Diaphragm Pumps 1:1 Minimum pulsation Minimal changeover times in conjunction with the short-stroke principle of the pumps reduce pulsation to a minimum and ensure a more uniform media flow. Maximisation ...
Timmer GmbH
the best suppliers