Bimba hydraulic fittings
Diameter: 6.5 mm - 44 mm
The IVG conduit fittings are made of specially modified polyamide 6, thermoplastic elastomer and nickel-plated brass. The materials are halogen, phosphor and cadmium-free.The IVG conduit fittings feature ...
MURRPLASTIK SYSTEMTECHNIK
Stream-Line Hose Adapters CEJN Stream-Line connections are available with swivel and fixed adapters, both are offered with or without kink protectors.
CEJN
Diameter: 6 mm - 30 mm
Operating pressure: 160 bar - 630 bar
Schwer Fittings
Diameter: 0.13 in - 4 in
Operating pressure: 10 bar
GF-140C Conical seal with parallel BSP thread to DIN EN 10226
Schwer Fittings
Diameter: 6 mm - 42 mm
Operating pressure: 300 bar - 600 bar
BV-212G with parallel BSP thread to ISO 228, with O-Ring seal
Schwer Fittings
Diameter: 6.3 mm - 50 mm
Operating pressure: 15,000,000 Pa - 35,000,000 Pa
Features Connection by pulling back the sleeve Disconnection by pulling back the female sleeve Shut off by poppet valve Connection under pressure not allowed Disconnection under pressure not allowed Interchangeability according to ISO 7241-1 ...
FASTER S.p.A.
Operating pressure: 0 bar - 8 bar
It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...
Ridart srl
Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar
VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...
Ridart srl
Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Ridart srl
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...
NIHON PISCO CO., Ltd.
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
Newly introducing Lock-claws type Push-in fitting made of SUS316. High reliability and outstanding operability. The Lock-claws method similar to the Tube Fitting Standard Series is adopted. Excellent ...
NIHON PISCO CO., Ltd.
Diameter: 4 mm - 16 mm
Compression fitting made of SUS316, which is highly resistant to corrosion. Best suitable for not only chemical industries but industries such as medical care, semiconductor manufacturing, solar battery and secondary ...
NIHON PISCO CO., Ltd.
Diameter: 9 mm - 27 mm
90° brass elbow with metallic continuity IP67 Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material housing Brass Model 90°-Bend Surface ...
Manufacturing Process CNC Machining & Injection Molding Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature ...
Operating pressure: 25, 80, 200, 250, 390 bar
... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.
NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless steel fittings are available ...
NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...
A fluid connector is a connector that transmits fluids. It is a connector for connecting or disconnecting the fluid pipeline, which is suitable for various fluid connection occasions. such as Automotive, Plastics, IT-Broadcasting, Railway, ...
Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 2 in - 32 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi
Swivel joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 20, 25 mm
Operating pressure: 70 bar
Diameter: 20, 25 mm
Operating pressure: 70 bar
Diameter: 20, 25 mm
Operating pressure: 70 bar
Operating pressure: 80 bar
Diameter: 3 mm
Temperature Technology Ltd
Diameter: 1 mm - 8 mm
Temperature Technology Ltd
Diameter: 1.5 mm - 8 mm
Temperature Technology Ltd
Diameter: 10 mm - 54.5 mm
Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class [acc. to EN 60529]: IP 66
flexa
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ... ...
flexa
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. rate ...
flexa
Diameter: 0.125 in - 1 in
Operating pressure: 60 bar
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...
ITV
Diameter: 0.125 in - 1 in
Operating pressure: 60 bar
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...
ITV
Diameter: 0.125 in - 1 in
Operating pressure: 0 bar - 60 bar
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe ...
ITV
Diameter: 0.25 in - 2 in
Operating pressure: 10 bar
Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available
Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar
With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. ...
Diameter: 15, 20, 25, 32 mm
... original fittings. Fittings are made of high quality CW617N brass. The distinctive feature of the fittings is their custom design developed by SST and allowing the part to be fitted ...
Stahlmann
Diameter: 50 mm - 200 mm
Operating pressure: 16 bar
Fittings with integrated anchoring socket for PE 80/ PE 100 pipes. Features Quick: Time saving up to 70%. No abrasion of the oxide film. No time for welding and cooling. Economical: no welding unit. ...
Frischhut
Diameter: 50 mm - 450 mm
Operating pressure: 10, 16 bar
As standard equipped with seal Typ 3S and -protecting caps GSK quality controlled and certified in accordance with RAL-GZ 662
Frischhut
Diameter: 80 mm - 200 mm
Operating pressure: 16 bar
GPE-i for connection to the VRS®-T sockets Features All materials with drinking water approval Easy assembling due to low axial force at VRST connection PE 100 for welding, push-fit or clamp-connection
Frischhut
Diameter: 3 mm - 15 mm
The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow control fluid handling ...
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 15 mm - 108 mm
Operating pressure: 16 bar
Description NiroSan SF Tee, female ends 19130 - NiroSan SF Tee
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
Description NiroSan Bend 90°, female end and male thread
SANHA GmbH & Co. KG
Diameter: 6 mm - 108 mm
Operating pressure: 25, 16, 10, 45 bar
... solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering. All products are certified according to many national and international certification bodies. SANHA capillary ...
SANHA GmbH & Co. KG
Diameter: 63 mm - 630 mm
... construction. Due to this compact design the space requirement is reduced and the cost minimised when compared to standard fittings. The fittings to be offered must be manufactured from material in ...
Reinert-Ritz GmbH
Diameter: 40 mm - 225 mm
Operating pressure: 10 bar
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Diameter: 250 mm - 630 mm
... increased through directly available reducers at the branch, which also makes the fitting compact and light. Branches at other angles are available upon request. The fittings to be offered must be ...
Reinert-Ritz GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining