- Detection - Measurement >
- Electrical Measurements >
- Calibrator >
- Bruel and Kjaer
Bruel and Kjaer calibrators
The SpeedMaster™ is manufactured by Go4B, and is a speed switch calibration and testing device with pulse pilot. It is the only device that accurately tests the calibration of a speed switch, and permits testing of the 10% alarm and 20% ...
The ADB Sensor Tester is a hand held unit perfectly suited for field testing of 4B adjustable depth bearing (ADB) temperature sensors, as it is equipped with an integrated heating block, designed for direct insertion of sensors. Once ...
Calibration Target Micro V1 Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, ...
The stage micrometer from Opto in the form of a microscope slide is required for the calibration of microscopes. - Glass scale 50 mm in 0.1 mm and 0.01 mm - Calibration of measurement software The stage micrometer is also available ...
Opto's Particle Test Target allows the calibration of measurement functions in microscopes through objects in different forms and sizes or of resolution of an optical system measured in Line Pairs per mm. It is used in the field of Residual ...
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
The 4011 is a sound calibrator conforming to IEC 60942 class 1 and ANSI S1.40 for the calibration and the verification of microphones and sound level meters. It generates a sound pressure level of 114 dB at a frequency ...
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
Noise level: 114 dB
Temperature: -10 °C - 50 °C
Pressure: 65,000 Pa - 108,000 Pa
The 4010 is a sound calibrator conforming to IEC 60942 class 1 and ANSI S1.40 for the calibration and the verification of microphones and sound level meters. The combination of two sound pressure levels and two ...
A gas preparation device for calibration of a flow ratio mixing system for the purpose of using calibration of an atmospheric sulfur dioxide analyzer, a nitrogen oxide analyzer, and a carbon monoxide analyzer. A zero gas generator is ...
Process Calibrator CL-327A general characteristics: 1, The basic accuracy of the output of up to 0.02%, the output is displayed as 6 digit 2, The output functions: DC voltage, DC current, ohms, analog transmitters, ...
Tecpel Co., Ltd.
The Tecpel CL-420 is a process calibrator that is a flexible, high precision, battery operated and extremely durable hand-held process calibrator permits process technicians to reproduce and source variables ...
Tecpel Co., Ltd.
The CL 325 multi-functional process calibrator from Tecpel is equipped with a beeper warning when output is open (mA) or short (mV,V). It features K, J, E, T Thermocouple in °C and °F, easy key-pad operation, and easy ...
Tecpel Co., Ltd.
Pressure: 0 psi - 40 psi
Voltage: 120 V
The CleanAir 5 CHANNEL CALIBRATOR is designed to interface EMC analysers with five individual calibration gases. The gases can be controlled manually or remotely to pass through one of the two calibration ports. Designed ...
Pressure: 0 bar - 40 bar
Voltage: 4, 5 V
... actually able to detect and reject the component being tested with the specified leak. LTC has been designed as pressure calibrator to verify and certify the equipment pressure and flow measurements. Through LTC ...
Temperature: -100 °C - 40 °C
Calsys -100/40 offers easy to use portable low temperature calibrator with temperature range from -100 to 40°C. It is a highly stable standard furnace for calibrating RTD. This calibrator can be used ...
TEMPSENS
Temperature: 50 °C - 650 °C
CALsys 650 offers easy to use portable temperature calibrator with medium temperature range from 50 to 650°C. It is a highly stable standard furnace for calibrating thermocouples / RTD. This calibrator ...
TEMPSENS
Temperature: -80 °C - 50 °C
Calsys -80/50 offers easy to use liquid temperature calibrator with high temperature range from -80 to 50°C. It is a highly stable standard furnace for calibrating thermocouples / RTD. It provide superior thermal environment ...
TEMPSENS
Temperature: 0 °C - 1,200 °C
Weldotherm® recommends this robust precision measurement and calibration device for use on construction sites. Through the use of a toggle, temperatures can be simulated or measured precisely. The measurement device has a built-in reference ...
* Professional, 125 Hz/94 dB sound source. * Die casting aluminum alloy housing case. * DC 9V batteries x 2 PCs. * Size : round 50 mm Dia. x 145 mm ( length ).
Lutron
Temperature: -45 °C - 85 °C
The VC-01 Handheld Calibrator is a low cost reference accelerometer device that allows the user to quickly check the response of accelerometers at a known fixed frequency and level. Ideal for use in the field or in a ...
... 3.5 digit LCD display to show a clear, high resolution display of the flow rate. The excellent viewing angle allows the calibrator to be mounted anywhere and still be visible by the operator. Shut-off valve Rather ...
... Pressure & Flow Calibrator In calibration mode the FCO560's multiple sensor configurations allow different external references to be used quickly and simply. When combined with laminar flow elements, the FCO560 may be ...
Pressure: 0 Pa - 44,000 Pa
- A unique primary standard for low-pressure scenarios - Pressure calibration range from 0.001 Pa to 44k Pa - Typical uncertainty of ± 0.005 % reading + 0.02 Pa - Used worldwide in national & accredited laboratories - ...
M2710 is the new digital portable calibrator of ForTest® M series. Enclosed in a container of anodized aluminium with shatterproof plexiglass front, we find a completely new circuit board and a mass flow meter sensor, ...
... testing programme parameters used is normally carried out with the aid of two accessories, calibrated leak devices or leak calibrators. Calibrated leak devices are used to simulate the maximum leakage value of the ...
Temperature: -10 °C - 50 °C
Noise level: 114, 94 dB
• Accurate and Simple to use • Fits 1’, 1/2” or 1/4” diameter microphone
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: -3 V - 220 V
• Unique mapping function let you calibrate temperature (300 °C) or voltage (220V) directly. • iCal is a multifunction calibrator and an arbitrary function generator. • Source: mA (4 to 2OmA), V (0 to 15V, 0 to 7OmV), ...
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: 0 V - 600 V
• Source 4’’20mA loop current. • 4»2OmA (1KÇ load, 24V loop supply). • Source: 0’.’lOOmV, 0’4.000V, 0» 12.000V. • Measure: DC mA, mV, V, Q, Frequency (duty cycle), Diode, Continuity and temperature (°C, °F) • Measure: AC (Tnie RMS) ...
TES Electrical Electronic Corp.
Calibration of force reference standards Reference standard measurement machine inspekt K 600kN Load cells, which are used for example in classic material testing machines, must be checked periodically for their measuring accuracy ...
Temperature: 0 °C - 45 °C
... Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator ...
Temperature: 0 °C - 45 °C
... Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator ...
Noise level: 94 dB - 114 dB
The field calibration of Sound Level Meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that instruments are providing consistently accurate readings ...
The G.R.A.S. 42AB Sound Calibrator is a small battery-operated precision microphone calibrator. The calibrator can be used directly on 1" microphones and ½" microphones. Adapters for ...
G.R.A.S. Sound & Vibration
Temperature: -10 °C - 50 °C
SV 111 vibration calibrator is the State of the Art instrument designed for human vibration measurements according to ISO 8041. The design of the calibrator is based on the triaxial reference accelerometer ...
SVANTEK Sp. z o.o.
Temperature: -200 °C - 2,300 °C
Voltage: 100 mV
... LCD backlight, auto power off, bi-color injection case and 1m drop proof. Features of UT701 Single Function Temperature Calibrator Certifications: CE, UKCA ● Up to 0.05% output accuracy ● 6-digit display ● ...
Temperature: -20 °C - 60 °C
Voltage: -100 V - 100 V
... 334 milliamp loop calibrators from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIE Model 334 is the perfect replacement for your worn out milliamp ...
PIE - Pratical Instrument Electronics, Inc
AOIP
Temperature: -270 °C - 2,310 °C
Pressure: 0 bar - 1,000 bar
Voltage: 100 mV - 50,000 mV
CALYS 1000 is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and lab measurements, ...
AOIP
Temperature: -250 °C - 2,310 °C
Pressure: 0 bar - 1,000 bar
Voltage: 100 mV - 50,000 mV
CALYS 1200 is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and lab measurements, ...
AOIP
Voltage: 0 V - 1,000 V
... the world's first ultra-portable full-function calibrator. Transmille have applied their expertise in designing bench and transportable calibrators to create a new generation of multifunction calibrators ...
TRANSMILLE
Pressure: 2,000 bar
AEP transducers
Universal instrument for monitoring and calibration of signal converters and process data Supplies or monitors current- and voltage signals Analogue adjustment and digital display Supplied from battery or line via adaptor Made in accordance ...
Temperature: 40 °C - 375 °C
Voltage: 234 V
Universally applicable and portable Blockcalibrator for immersion-and insertion probes (e.g. Pt 100, Thermocouples) between +40...375°C • Large measuring range +40 ... 375 ° C • 230 VAC power supply • 120mm immersion depth Various ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining