CHARLES AUSTEN PUMPS LTD oil-free pumps

Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W

Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C

Centrifugal Brushless DC 24V 12V Mini Water Pump Specification: voltage:12v or 24v flow rate: 7L/min 9L/min 12L/min water head:3M 5M 8M Feature: ◇Advanced magnetic ...

Flow: 7, 9, 12 l/min
Head: 3, 5, 8 m
Power: 7 W - 32 W

... Dry-running Protection Over-voltage protection Typical Applications • Battery cooling water pump • Truck air conditioning cooling • Water dispenser, Water ...

Flow: 0 l/min - 3 l/min
Head: 6 m
Weight: 900 g

Mini Diaphragm Liquid Pump TF51-C Motor Type:Brushless DC motor Max flow rate:3L/Min Water lift:6M Voltage:12V 24V Ideal Life Time:10000 Hours Functions:Can dry-running, ...

Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm

High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level

Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C

ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

... about QUANTUM series DOUBLE DIAPHRAGM The construction of QUANTUM pumps also included free-fastening diaphragms. This allows easy maintenance, more safety when pumping aggressive liquids ...

Flow: 14 l/min

... with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it is not ...

Flow: 100 l/min
Pressure: 7, 8 bar

Pneumatic membrane pump, PP body Applications: Water-based liquid, acid or diluted base, AdBlue, etc.

Flow: 50 l/min
Pressure: 8 bar

... bases. These pumps are self-priming when used for dry running. The priming height varies depending on the humidity of the pump. The flow rate can be set by adjusting the pressure ...

Flow: 1.59 m³/h
Pressure: 1.4 bar - 6.9 bar
Head: 6, 4.5 m

... advantages Pumps designed for the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Dry self-priming pumps. ...

Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW

CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other ...

Flow: 0 l/min - 30 l/min

... process. Economical and compact solution The Tapflo powder transfer pump can do the same job as many complex and large powder systems. The compact design also makes the unit portable. What ...

Flow: 0 l/min - 330 l/min
Pressure: 8 bar

... rotating shaft seals Flexible installation self-priming Reliable in service can run dry and against closed valve without damage Environmental friendly lube free air valve Hygienic diaphragms designed ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water ...

Flow: 6,000 m³/h
Head: 1,200 m
Fluid temperature: 250 °C

Reactor feed water pumps are designed and constructed to withstand specific site environmental conditions and operating criteria. This specific feedwater pump is an ASME III class ...

Flow: 7,000 m³/h
Fluid temperature: -180 °C - 426 °C

... ClydeUnion Pumps CUP-VS6 is a vertical turbine, multi-stage, heavy-duty pump designed to the latest edition of API 610 and API 682 standards. It is designed for dry or wet pit applications. The ...

Flow: 140 l/min
Head: 14 m
Power: 0.55 kW

In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump ...

Flow: 500 l/min
Head: 40 m
Power: 0.18 kW - 5.5 kW

The U-Do Pump Series is a universally applicable all-rounder. The design and manufacturing materials allow for optimized adaptability for the many different operating conditions as well as for the various media to be ...

Flow: 460 l/min
Head: 39 m
Power: 0.18 kW - 5.5 kW

... centrifugal pump. All parts that are in contact with the medium are made solid of stainless steel (1.4581). The cooling and lubrication of the mechanical seals is carried out through a separate seal water ...

Flow: 12 m³/h
Pressure: 100 bar
Head: 288 m

... multi-stage side channel pumps with open vane wheel impellers handling entrained gas during normal duty. A special bearing was developed for compensation of the axial forces occurring in case of high nominal pressures. Applications: Pumps ...

Flow: 16,000 m³/h
Pressure: 25 bar
Head: 250 m

... turbine pumps are single stage or multistage in construction and submerged impellers allow the pump to be started without need of priming. VT pumps are designed to operate without being ...

Flow: 180 m³/h
Pressure: 5 bar
Head: 56 m

Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or ...

Flow: 0 m³/h - 611.64389 m³/h
Head: 0 m - 91 m
Power: 0.37 kW - 1.1 kW

... effective draining of water almost to the ground level. The motor is of dry type with F class insulation for reliable service. Highly resistant mechanical seal ensures reliability and trouble free ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW

... against dry running. The high magnet force of the rare earth magnets prevents coming in contact of the contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 70 m
Power: 0.4 kW - 15 kW

... against dry running. The high magnet force of the rare earth magnets prevents coming in contact of the contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. ...

Flow: 70 l/min - 600 l/min
Head: 0 m - 30 m
Power: 1.5 kW - 4 kW

... chemical process pumps With the MXM series a new generation of mag. drive chemical pumps complete the line-up of our world wide proven process pumps. By the non contact system in conjunction ...

Flow: 104 m³/h
Head: 36 m
Power: 0.34 kW - 7.5 kW

vertical single-stage immersion pump in block design equipped with a freewheeling shaft for protection against dry running Broad range of applications through diverse construction and material combinations Excellent ...

Flow: 6,000 m³/h
Fluid temperature: 250 °C

CUP-FWP - feed water pump Product Category: NUCLEAR PUMPS Reactor feed water pumps are designed and constructed to withstand specific site environmental...... Reactor ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. ...

Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. ...

Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. ...

Flow: 400 m³/h - 8,500 m³/h
Pressure: 4.5 bar
Head: 3.5 m - 32 m

The ST model is a horizontal centrifugal pump with a non-clogging and non-stringing two-channel impeller. It is engineered for dry installation and universal use in the water and wastewater ...

Flow: 250 m³/h - 3,000 m³/h
Pressure: 2 bar
Head: 2 m - 20 m

The type SKO is a horizontal sewage centrifugal pump with three-channel impeller for dry installation and universal use, suitable for pumping activated sludge as well as mixed, rain and raw water ...

Flow: 300 m³/h - 26,500 m³/h
Head: 2.5 m - 40 m

The SKV is a centrifugal pump with three channel impeller for dry installation and universal use, suitable for pumping activated sludge as well as rain, raw and mixed water with an upstream ...

Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm

... excellent flow rates. The Versamatic 1 ½" pump is the performance leader in flow rate at 123 gpm (465 lpm), displacement per cycle and dry suction lift. Additionally, this pump: ...

Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm

... conductive acetal or conductive polyvinylidene fluoride (PVDF) pumps are not to be installed in applications where the pumps may be subjected to oil, greases and hydraulic liquids. ...

Flow: 4 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...

Flow: 0.5 m³/h - 80 m³/h
Pressure: 0 bar - 48 bar

Pumps of the type WANGEN KL-RQ have a transverse feed device for integrated bridge breaking and a collecting vessel for continuous feeding. Very robust and designed for conveying dewatered sludge with a high content of ...

Flow: 0 m³/h - 450 m³/h
Head: 0 m - 100 m
Power: 4, 3 kW

Standardized centrifugal pumps type NB are single-stage horizontally mounted pumps. They are characterized by a maintenance-friendly design and can be used in a wide variety of applications. 18 sizes ...

Flow: 0 m³/h - 6 m³/h
Pressure: 4 bar

... weight. The pump can be rapidly dismantled for Cleaning Out of Place (COP) in food applications. PCM EcoMoineau™C floating stator pump is based on the “Moineau™” progressing cavity pump ...

Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 52 bar

... . The IVA/LVA pumps are ideal for viscous and heterogeneous fluids pumping. The GVA pumps allow to transfer very viscous, sticky and heterogeneous products. IVA/LVA Transfers high viscosity, non-homogeneous ...

Flow: 0 l/h - 315 l/h
Pressure: 12 bar

... is designed for metering a wide variety of products in the food and personal care industries. Lagoa principle The Lagoa pump is composed of a membrane connected to a piston which alternating movement successively ...