Flow: 0 l/min - 155.2 l/min
Pressure: 0 bar - 8 bar
... the disassemble and assemble of the pump and therefore also limits the risk of contamination.The pump is able to create up to 9,1m suction lift, has self-priming capability and can dry run without damaging ...
Verder Liquids
Flow: 0 l/min - 681 l/min
Pressure: 0 bar - 8 bar
... the disassemble and assemble of the pump and therefore also limits the risk of contamination.The pump is able to create up to 9,1m suction lift, has self-priming capability and can dry run without damaging ...
Verder Liquids
Flow: 0 l/min - 870 l/min
Pressure: 0 bar - 8 bar
... the disassemble and assemble of the pump and therefore also limits the risk of contamination.The pump is able to create up to 9,1m suction lift, has self-priming capability and can dry run without damaging ...
Verder Liquids
Flow: 14 l/min
... br>With commercially available reusable pumps, there is a risk that the liquid to be filled will be contaminated by the pump - especially if the pump is used for different media or containers ...
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... efficiency of the large high-pressure pump is higher than that of the small high-pressure pump, so energy saving From a point of view, it is better to choose one large high-pressure pump ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 187 cm
... -pressure pump should be repaired every six months to prevent working with illness. During the non-use period, the high-pressure pump should be lifted away from the water source in time, and the water ...
Tinajin Harvest
Flow: 91 l/min - 240 l/min
Pressure: 1,450 bar - 2,800 bar
Length: 1,866 mm
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 873.6 m³/h
Head: 7.9 m
Power: 23 kW - 26.5 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 948.8, 1,465.3 m³/h
Head: 32.8, 26 m
Power: 118 kW - 122.7 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 1,088.5 m³/h
Head: 11 m
Power: 43 kW - 45.5 kW
... Submersible pump of heavy and hard construction, dry motor type with interposition of the oil chamber between the hydraulic part and the motor side. ...
FAGGIOLATI PUMPS
Flow: 55 l/min
Pressure: 8 bar
Head: 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 66 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 100 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
... CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...
Tapflo
Flow: 0 l/min - 30 l/min
... process. Economical and compact solution The Tapflo powder transfer pump can do the same job as many complex and large powder systems. The compact design also makes the unit portable. What kind of ...
Tapflo
Flow: 0 l/min - 330 l/min
Pressure: 8 bar
... rotating shaft seals Flexible installation self-priming Reliable in service can run dry and against closed valve without damage Environmental friendly lube free air valve Hygienic diaphragms designed without any ...
Tapflo
... air. Diaphragm pumps work on a principle similar to a suction pump. Air diaphragm pumps are driven by compressed air, not an electric motor. It works by connecting to the air line ...
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... inverter allows 4HS to: Change pump speed to maintain set-pressure regardless of water demand. Consequently the pump is operated only when and as needed without wasting energy, thereby extending pump ...
Flow: 2 m³/h - 215 m³/h
Power: 1.5 kW - 37 kW
Weight: 9.4 kg - 186 kg
... any pump driven by a three-phase motor. Pump speed is constantly adapted to available solar irradiation thus maximising the amount of pumped water and making possible operation even in conditions of ...
Flow: 100 l/min
Pressure: 7, 8 bar
... Pneumatic membrane pump, PP body Applications: Water-based liquid, acid or diluted base, AdBlue, etc. ...
Pompes Japy
Flow: 50 l/min
Pressure: 8 bar
... bases. These pumps are self-priming when used for dry running. The priming height varies depending on the humidity of the pump. The flow rate can be set by adjusting the pressure and flow rate ...
Pompes Japy
Flow: 1.59 m³/h
Pressure: 1.4 bar - 6.9 bar
Head: 6, 4.5 m
... advantages Pumps designed for the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Dry self-priming pumps. The ...
Pompes Japy
Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W
... One-Stop Solution for Compact Wastewater Treatment. Embedded control panel and the switching valve. Capable of setting programs optimized for SBR and other wastewater treatment systems. A program for the US market is also available. ・Domestic ...
Flow: 15 l/min - 800 l/min
Pressure: 100 bar - 210 bar
Head: 10 m
... requirements • Can run dry without damage • The maximum cinrconference of only 22 cm allows easy insertion even in narrow manholes and very small excavation sites • It can be operated by small power ...
DOA Hydraulic Tools Srl
Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m
... requirements, can run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs ...
DOA Hydraulic Tools Srl
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... spills of oils and oil products from “skimmers” into the sea and lakes SP35 is a 3 hydraulic waste pump for clear and heavily loaded liquids, impeller and shell are made in stainless ...
DOA Hydraulic Tools Srl
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
... High performance standards 100% Oil- free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level ...
Flow: 0 l/min - 4 l/min
Pressure: 2.5 bar
... regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. These units offer a reliable alternative to lab piston metering pumps, gear pumps ...
Flow: 105 l/h - 54,000 l/h
Pressure: 16, 7.5 bar
Fluid temperature: 80, 90 °C
... Peristaltic Hose pump will handle your toughest pumping needs — from abrasive and aggressive to shear-sensitive and viscous fluids. Abaque pumps currently operate in some of the most demanding environments including ...
MOUVEX
Flow: 5.5 l/min
Pressure: 100, 140, 150 psi
Weight: 3.5 kg
... and motor Self-priming up to 8' (2.4m); pump can be located above supply tank Can be located above supply tank Can run dry for extended periods of time without damage Flojet Triplex Hi-Pressure diaphragm pumps ...
FLOJET
... importantly, diaphragm pumps are oil- free, for vastly reduced service demands compared with oil-sealed pumps. They eliminate the cost of water when using ...
... Low Flow Pneumatic Groundwater Sampling Pump The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use design. It runs cool and ...
QED Environmental
Flow: 5 l/min
Pressure: 0.8 bar
Fluid temperature: 125 °C
... Clean oil free vacuum or pressure source, in a tough and compact polycarbonate case which conforms to IEC 1010 safety. • Whisper quiet, continous operation and ruggedly reliable. • ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Flow: 0.1 l/min - 8 l/min
Power: 7 W
Fluid temperature: 0 °C - 40 °C
... engineer. Reasons to Buy Keyto Mini Diaphragm Liquid Pump Pure working environment Offering pure working environment for liquid transfer and air aspiration and compression. Quality ...
Keyto Fluid Technology
Flow: 0.5 m³/h - 80 m³/h
Pressure: 0 bar - 48 bar
... Pumps of the type WANGEN KL-RQ have a transverse feed device for integrated bridge breaking and a collecting vessel for continuous feeding. Very robust and designed for conveying dewatered sludge with a high content of dry ...
Flow: 9 us gal/min
Head: 14'00"
Fluid temperature: 104 °C
... Centrifugal Pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal Pumps are not self-priming and must be used in applications where flooded ...
Gorman-Rupp Industries
Flow: 0.001 l/min - 28,800 l/min
Power: 12 W
Fluid temperature: 0 °C - 60 °C
... dosing pump LFP302/ST is capable of being able to handle viscous, acid, alkali, and sterile fluids., The ideal solution for pumping and dosing various types of liquids whether chemical aggressive or extremely high temperature. ...
LEFOO Group
Flow: 500 m³/h
Pressure: 10 bar
Head: 35 m
... In-line circulating pump with dry, electric motor shaft and mechanical seal to EN 12756 (DIN 24690) Compact, economic, space saving construction Wide range of applications Outstanding hydraulic performance ...
Johnson Pump
Flow: 7.2 m³/h
Power: 550 W
Fluid temperature: 80, 110 °C
... resistant and features oversized bearings for exceptional life. Quiet and vibration- free operation. Submerged setup Designed to operate only in the bath, this pump can run dry without deterioration. ...
Siebec
Flow: 90 l/min - 440 l/min
Pressure: 0.4, 0.28, 0.33 MPa
Head: 0 m - 24 m
... resistant self-priming magnetic drive pumps which can tolerate abnormal operation The SMX-F is a horizontal self-priming magnetic drive pump made from fluororesin. Our original self-radiation structure enhances resistance ...
IWAKI Europe GmbH
the best suppliers