The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via ...
METZ CONNECT
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window ...
METZ CONNECT
The Modbus module in an IP65 housing with 4 digital inputs and 2 relay outputs was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window ...
METZ CONNECT
ASi Digital I/O Module in IP20, 22,5 mm x 50 mm, with 4 x 4 contacts, 4 digital inputs, 4 digital outputs, input voltage/sensor supply out of ASi, output ...
Bihl+Wiedemann GmbH
• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power ...
... is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process ...
... other devices. PD 802 is used with the BM 103 base module that provides the power supply connection and connection for all the communication interfaces. The device can be fixed to the base module ...
PROCES-DATA A/S
... 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic ...
LEROY AUTOMATION
... , like on-the-fly image acquisition. Features ● 4-Ch. Encoder Motionnet® slave modules ● Max. 20Mbps transfer rate ● Easy installation with RJ45 phone jack and LED diagnosis ● Position compare ...
Taiwan Pulse Motion
... Motionnet® slave module. The transfer rate is up to Max. 20Mbps. With CAT5 cable, 108-P144 can be connected serially. It also provides programmable input filter. Features ● 4-Ch. up / down 32-bit Counter Motionnet® ...
Taiwan Pulse Motion
... Features ● 8 Ch. Analog Input / 2 Ch. Analog Output slave module ● 8 Ch. Digital Input / 8 Ch, Digital Output slave module ● Max. 100Mbps transfer rate ● Easy installation ...
Taiwan Pulse Motion
The digital I/O-Module MK210 has 6 or 12 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 8 or 4 digital outputs (relay) available. ...
The digital I/O-Module MK210 has 6 or 12 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 8 or 4 digital outputs (relay) available. ...
The digital output I/O-Module MU110-24.8D.4R has 8 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 4 digital outputs (relay) ...
The ELPRO 115E-2 Ethernet Networking I/O and Gateway is a multiple I/O node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. Designed to work with ...
ELPRO Technologies
... xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of ...
... the same time, the module offers 14 digital outputs, most of which can be configured as PWM or PWM(i). The maximum output current of 7 A is sufficient to control even actuators with high power. Fully ...
... xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. Two of the ...
The QE-8DI is a slave module with n°8 digital inputs. Thanks to the presence of the RS485 serial port it can perform advanced functions such as I/O module with Modbus ...
qeed
The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks ...
SERAD
... acquisition modules, which are also called distributed IO modules, IO modules, data acquisition cards, data loggers, and IO cards. FEATURES ...
BRAINCHILD ELECTRONIC CO., LTD
... Central, using local I/O bus of CPU module. Up to ten I/O modules can be connected to the CPU. Decentralized periphery via fieldbus between CPU module ...
ABB Automation Products GmbH
... and Serial. The parallel modules (I-8K Series) are high-speed modules and support MCU (Main Control Unit) only. The serial modules (I-87K Series) can support either MCU or I/O ...
8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated ...
Brainboxes
... RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is available with a ...
DATEXEL SRL
This module is an external board assembled on a DIN rail with: 8 digital contact relay outputs, with several functions like: level indication or alarms (setpoints), barriers and traffic lights control ...
... functions on the digital input / ouput MAQ20-DIOH module can run simultaneously. High, Low, High-High and Low-Low alarms provide essential monitoring and warning functions to ensure optimum process flow ...
... user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the channels on this digital input / output module ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O ...
... interrupt inputs Galvanic isolation from system Status display for each channel via LED The digital input / output modules DIO216/x and DIO232 can be used ...
BACHMANN
The ANTARES 4AIO Remote I/O Module is operated and supplied with power by means of the Rail Control Unit (RCU) ANTARES. This module allows the direct linking of 4 intrinsically safe transmitters ...
BARTEC
... LioN-Power multiprotocol modules offer highly customizable features to deliver fieldbus-independent automation for the leading industrial Ethernet protocols. Replace modules faster by using the universal ...
... variants: – 8 and 16-way digital universal module with inputs and outputs – 4, 8 and 16-way digital input modules – 4, 8 and 16-way digital output ...
... Current - 6mA max. Input Impedance - 5.9 kohm Response Time - '0' to '1' 50ms Galvanic Isolation - 500 VAC for 1 minute Digital Outputs Outputs Current - 1 A max. (Total current 8 A max.) Galvanic Isolation ...
Please specify:
Help us improve:
remaining