Dresser-Rand direct-drive fans

Air flow: 50,000 m³/h

... 125 °C • Volume flow up to 50.000 m³/h • Pressure increase up to 10.000 Pa • Overhung design • Flow one-sided suction • Drive power up to 110 kW • Bearing: Without • Installation with steel bearing pedestal Special ...

Air flow: 1,350 m³/h - 12,000 m³/h

For clean air applications, low noise level and medium/high pressure operation, four different positions availables. Applications: Air conditioning and ventilation operations.

Air flow: 500, 1,000, 1,600 m³/h
Diameter: 200, 250, 300 mm
Noise level: 18 dB - 69 dB

The CLASSIC | CLC-P axial duct fan is designed for indoor use. Provides fresh air supply. It can be used in air ducts or as a part of other air-handling systems. Technical Specifications Integrated ...

Air flow: 3 m³/min - 70 m³/min
Diameter: 50 mm - 200 mm
Noise level: 50 dB - 90 dB

The Sirocco Blower is a futural device. Designed by Chuan-Fan Electric Co. Ltd. it is utilized for over, plastic and printing industries ventilation as well as for drying and cooling purpose machinery ventilation. It ...

Air flow: 1,500 m³/h - 25,000 m³/h

... 350 pa Working temperature: - 20 °C ~ 60 °C Driver: motor direct drive Product Characteristics ※ Impeller in sweepforward type and low noise outer rotor or inner rotor motor direct ...

Air flow: 21,000, 44,000, 10,600 m³/h

... system open the shutters at complete 90 degree to ensure the lowest air resistance and biggest air volume. When close, the sealing can efficiently block light and wind into the poultry ...

Air flow: 5,000 m³/h - 190,000 m³/h

VENCO ATEX Certified Ex-proof Axial Fans are used in the industrial applications such as petro-chemical process, sewage treatment and painting .The best matching fan is supplied in the wide range by selecting ...

With direct drive, V-belt drive or coupling drive. Industrial fans Fans are used in countless industrial plants. If the fan ...

Air flow: 515 m³/h
Diameter: 119 mm
Rotational speed: 11,000 rpm

... speed or current), using unique materials (fan frame, fan blades, circuit board, etc.), our fan air volume will be greater. 2.Low Noise: The use of ultra-quiet materials ...

Air flow: 180,000 m³/h

... RA­DIAL FANS WITH DI­RECT DRIVE WHAT IS A RADIAL FAN WITH DIRECT DRIVE? First of all, the fan is an im­por­tant drive ...

Air flow: 1,400 m³/h - 47,000 m³/h

... EI-U/EIL series axial fans are designed to convey fumes or stale air, even if slightly dusty, at temperatures of up to a maximum 50°C. They are used in industrial plants for ventilation or drying and wherever large volumes ...

Air flow: 45,000 m³/h

... bladings according to the type and concentration of conveyed pollutants. Optimised output (impeller adapted to air features). Direct drive. Consists of 2 types of impellers and 14 ...

AC SERIES Series AC, with impeller directly coupled to the motor shaft, suitable for sucking of fumes, dusty and damp air in foundries, cement works, paper mills and carpenters. It can be equipped with long or short ...

Air flow: 500 m³/h

The Secomak range of direct drive centrifugal fans and blows have been developed to give high volume air flow up to 2,200 m3/hr. The design of the fans ...

... the field with Powerfoil D, the only direct-drive overhead fan purpose-built for harsh industrial conditions. In the hot, dusty environments that put competitors’ fans out of commission, ...

Air flow: 2,000 m³/h

... The versatile air hoses facilitate quick installation on each mouth as the stainless steel frame can be utilized in two ways. In its normal position, it can be used either with or without the hose. With the hose, the ...

Air flow: 148 m³/h - 5,600 m³/h

... steel sheet is connected to the electric motor by a double temperature barrier consisting of a motor jointing sleeve and a disk of a high heat dispersing capability. The fan is designed for transporting ...

... according to EN 60034-5/IEC 85. Motor in the air stream. Available as single and two speed motors (switchable poles). Operation with frequency inverter for standard ventilation on request. Two-stage fans Two ...

Air flow: 68,300 m³/h

PRODUCT CHARACTERISTICS With identical gauges, MT240 is more powerful than MT236 thanks to its 5.5 HP engine. It generates a flow rate of 68,300 m³/h. Robust, MT240 is equipped with LEADER monobloc shroud to reinforce the robustness ...

Cutting / tearing fans Shredding of residual materials Edge strips-, cutting- and tearing fans ease the handling of material. Perfectly suited for application with paper, corrugated cardboard and within ...

Air flow: 0 m³/h - 250,000 m³/h

AXIAL FAN Type HC Explosive atmospheres - Industrial ventilation - Tertiary ventilation Short HCC or long casing HCL with connecting flanges, direct driven. Version HC-EX for ATEX. Diameter of wheel ...

Air flow: 17,500 m³/h - 20,300 m³/h

... Galvanized Box Fan 92. The Galvanized Box Fan 92 is characterized by a compact execution and is delivered as a complete unit, easy to install. The direct driven fan ...

Air flow: 350,000 ft³/min

... backward inclined fan (BIHS) is used for clean-air applications to move high volumes of air at a variety of static pressures, such as in dust-collection systems. The AirPro BIHS centrifugal fan ...

Air flow: 2,300 m³/h - 115,000 m³/h
Diameter: 310 mm - 1,600 mm
Rotational speed: 750, 1,500, 1,000 rpm

Smoke extraction in case of fire, 300/400°c for 120 minutes. • Smoke extraction • Pressurization • Industrial ventilation & explosion-proof application Multiple european laboratories, BSI KITEMARK, APPLUS. ADVANTAGES DUCT- ...