- Machine-tools >
- Machine Tool Accessory >
- Chuck >
- EMUGE FRANKEN
EMUGE FRANKEN chucks
SIAM RINGSPANN
Clamping range: 18 mm - 140 mm
SIAM RINGSPANN
Clamping range: 12 mm - 130 mm
SIAM RINGSPANN
Rotational speed: 1,200 rad.min-1 - 10,000 rad.min-1
A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...
Rotational speed: 5,000, 10,000, 6,000 rpm
A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...
Compact tool holder which length under the gage line is 23.5mm (including bush flange thickness 1.5mm). Optimal when available space is limited. A compact tool holder ideal for use when available space for tooling is limited inside the ...
HSK-E For high speed cutting (HSC) For automatic tool change Without any drive keys for absolute symmetry
REGO-FIX
REGO-FIX CAPTO C6 / ER Colletholders Hi-Q® clamping nut included Guarantees highest clamping force and best balancing REGO-FIX CAPTO C6 / PG powRgrip® Colletholders T.I.R. of the whole system <3 μm, highest clamping force ...
REGO-FIX
T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with 10 mm diameter Q+ Balancing, ...
REGO-FIX
Clamping range: 5 mm - 66 mm
Rotational speed: 4,000 rpm
The CB-AG series collet chuck is a pull back design with a floating collet seat for machining shafts between centers. Centers or other part locators are mounted in the ID of the chuck. The floating collet ...
Microcentric
Standard Nose Collet Recommended for bar and most chucking application. Special sizes quoted upon request. One piece vulcanized design.
Microcentric
Clamping range: 25 mm - 100 mm
Standard Collet Recommended for bar and most chucking application. One piece vulcanized design.
Microcentric
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
Clamping range: 20 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 25, 32, 20 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 20, 25, 32, 42 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 0.3 mm - 34 mm
16 degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only those that meet the standards THREE TIMES are ...
ALPSTOOL
Alps Tool’s NICE MILL is a product that provides total support for machine tool tooling by making collet holders, AR collets, nuts, and other tooling compatible. This series offers a wide variety of collet holders, AR collets, nuts, ...
ALPSTOOL
Adjustable cutting edge for Y axis positioning. It can be use for coolant through Alignnable chuck center line and drill center line.
ALPSTOOL
Clamping range: 80 mm - 400 mm
Precision spiral ring chuck made of steel with cylindrical centering according to DIN 6350. The chuck enables uniform clamping force by centric clamping jaws as well as high runout accuracy. Three-jaw ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 115 mm - 210 mm
Pneumatic or hydraulic three-jaw chucks for individual mounting on the machine table or for workpiece automation. Advantages at a glance Design: Stainless cylinders, dust and splashproof Material: steel Finish: ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 80 mm - 162 mm
Mechanical manual chucks with high precision, holding force and rigidity for use on machining centers, prototyping and metrology. The version SK -2 provides, due to the optimized force transmission in both axial directions, ...
Spreitzer GmbH & Co. KG - Präzisionswerkzeuge
Clamping range: 160 mm - 350 mm
Rotational speed: 800 rpm - 1,800 rpm
INDEXING CHUCK WITH DRAW BAR CLAMPING AND MANUAL INDEXING MADT chucks series are self-centering. Jaws clamping is automatic trough a draw rod and a rear cylinder and manual indexing system. • made ...
Clamping range: 168 mm - 350 mm
Rotational speed: 750 rpm - 1,700 rpm
INDEXING CHUCK WITH MANUAL CLAMPING AND INDEXING Chucks series MADV are self-centering. In version MADV jaws clamping is manual thanks to an operating key and manual indexing system. • made in special ...
SMU.C..10W, SMU.ER..10 ADAPTORS FOR DRILLING TOOLS CHAMFERERS "CHAMFERING AND DRILLING IN A SINGLE OPERATION" Two versions are available: - One with a fixed shank on which it is possible to mount drills with Ø6, Ø8, Ø10, Ø12, Ø14, Ø16, ...
SAU TOOL S.p.A.
The HSK-DIN 69893 series is a type of device with various range of chucks. The device is used as a collet chuck. The weldon type shanks and whistle notch are also types of chuck. The ...
SAU TOOL S.p.A.
The modular tool-holder system from SAU offers a flexible line of modular units. Their products are a suitable solution for almost all tough machining conditions. The system conforms to DIN 69893-A HSK, DIN 69871, DIN 18 35/B, DIN ...
SAU TOOL S.p.A.
Clamping range: 0 mm - 16 mm
IZAR CUTTING TOOLS S.A.L.
Permits tapping using RD/ER 16 collet system Ideally suited for applications on Swiss and Japanese automats and lathes
CENTAUR
Clamping range: 0.02 mm - 1.02 mm
... IN ER COLLET CHUCKS OVER THE ENTIRE CLAMPING RANGE Four times more accurate than conventional RD/ER collet systems Improved tool life, increased feed rates, and improved workpiece finish and accuracy Use standard ...
CENTAUR
We carry a variety of CAT 40 end mill holders and CAT 50 end mill holders in metric and inch sizes. Also, find Morse Taper Holders, Jacob Taper Adapters, and Shell Mill Holders for CNC milling. CAT tools are also known as Caterpillar “V-flange”.
CENTAUR
The need to complete most of operations inside the turning center, asks the turret to work with rotating tools for a long part of their life. In order to grant best performances, rotating toolholders have become a basic component in ...
The HH chuck is a closed center 3-jaw power operated chuck which is made of steel, for heavy duty cutting applications. Designed to be directly mounted on the machine spindle nose, the HH chuck ...
... clamping of an exchange plate with custom top jaws and also the ability to clamp and unclamp the workpiece using the power chuck jaws without any type of additional manual holder. Advantages : - Drastically reduces ...
... High repeatability ≦10μm 6”-10” chuck sizes Indicator pin maintains true position General industrial workpiece machining Closed center chuck designed with the intent of changing jaws quickly and ...
Clamping range: 11 mm - 31.5 mm
nickel-plated • especially high wear resistance • optimised coolant duct exit • optimised flute cross-section • clamping screws art. no. 4071 included • order screwdriver art. no. 1612 separately
GÜHRING
Heavy Duty Shrink Chucks APPLICATION Application: Up to 50 % more overlap – Suited for *HPC cutting FEATURES - increased wall thickness - short and rigid design - high radial rigidity ADVANTAGES - these ...
Bilz
... holder for all diameters M stands for Constant Maximum Clamping Forces. Due to the consistant maximum overlap of tool and chuck, the design ensures constant hight clamping forces. The sleeve is also available with ...
Bilz
Corona Jet a new coolant supply through integrated inclined nozzles APPLICATION Application: Milling of deep cavities, ridges, and holes Machine type: Machining Centers FEATURES - Standard ThermoGrip® Geometry - Wetting and ...
Bilz
Rotational speed: 0 rpm - 40,000 rpm
The NIKKEN Slim Chuck is our standard and precise collet chuck solution. The construction consists of three components – the main body/shank with fine, molybdenum coated, external ground thread and internal ...
NIKKEN KOSAKUSHO
Clamping range: 3 mm - 25.4 mm
Rotational speed: 0 rpm - 30,000 rpm
Since the early days, originally to accommodate automatic work holding for the CNC Rotary Tables used on our production lines (with our ‘New Century’ Arbor), Nikken have always strived to provide solutions to counter the effects of vibration ...
NIKKEN KOSAKUSHO
Rotational speed: 0 rpm - 40,000 rpm
... for milling processes. As such some of features and design advantages of two existing products, namely the Slim Chuck and the Mini-Mini chuck, have been incorporated and combined into what has become ...
NIKKEN KOSAKUSHO
SELECTED TO LAST. Diversity, high quality and precision: Tool holders from 8x8 to 32x32 mm. This is where you’re assured to find the right KMH tool holders to meet your requirements: with or without through tool cooling, for almost ...
Arno Werkzeuge
PRECISION ON THE FLY. Tool changes with speed, precision and flexibility: HSK-T tool holders from ARNO. With HSK-T, you benefit from the advantages of the HSK interface for turning applications on multi-task turn-milling centres, ...
Arno Werkzeuge
Part-off holders and flange mounted holders Machine specific flange mounted holders for use with SA part-off modules, blades, monoblock holders, and monoblock holders SE. The modular holders can be mounted either normal or upside ...
Arno Werkzeuge
Application for holding tools with cylindrical shanks in collets DIN 6499/ISO 15488 (ER/ESX) Acceptance Morse taper shank with draw-in thread DIN 228-A tang to modify the holder into execution DIN 228-B on request Concentricity ...
FAHRION
Rotational speed: 12,000 rpm
The right tool clamping technology for every kind of machining operation: HAIMER Tool Holders During machining, specific demands for tool holding are laid down by each industry and application. The range varies from high-speed cutting ...
HAIMER GmbH
NTs original 4 Points adjustment system for easy, accurate and speedy runout adjustment Suitable for large diameter reaming. Reduce runout to 0-2 microns in under 60 seconds! ~Available in BT, CAT, HSK, AHO & UTS shank types ~Other ...
NT Tool
IMS
IMS
IMS
Rotational speed: 15,000, 18,000, 30,000 rpm
Our BT series steep taper shaft holders are a classic. They are a widely popular clamping solution traditionally used for milling spindles. Easy to operate, robust, precise – covering a vast range of applications. > superb precision, ...
Rotational speed: 40,000 rpm
As a traditional steep taper interface for machine tool spindles, ISO is famous for its robust design. It is applied all the range from light to heavy machining. Centering is done via taper contact. Clamping is secured by an additional ...
Rotational speed: 40,000, 25,000, 20,000 rpm
HSK has become the standard interface in metal machining operations. Clamping is done via taper and face contact – thus higher rigidity is achieved. Centering and axial fixing as well as repetitive accuracy is unmatched. HSK holders demand ...
LIVE CHUCK FLANGE: 380 max. 1 µm with pressure compensation with sealing ring hardened jaws + soft top jaws chuck in cast or steal shaft MT 2 / 3 / 4 / 4S / 5 / 5S / 6 / 6S
Clamping range: 68 mm
Rotational speed: 8,000 rpm
Axial drilling and milling head with offset axes Premium class tooling system for highest production efficiency - Made in Germany With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. ...
EWS Weigele GmbH & Co. KG
Rotational speed: 8,000 rpm
With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...
EWS Weigele GmbH & Co. KG
Rotational speed: 6,000 rpm
With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...
EWS Weigele GmbH & Co. KG
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining