Temperature limit: -15 °F - 400 °F
The O-Rings Meet MIL-R-83248C and ASTM D2000/SAE J200. They offer excellent resistance. Temperature range is -15° to +400° F. hardness is A75. Color is black
GA - Gaskets Southco provides one-stop shopping convenience for enclosure manufacturers needing access hardware and gaskets to provide environmental sealing or minimize rattle. Multiple gasket ...
Anaerobic seal, it polymerises in the absence of air in approximately 45 minutes. It replaces pre-formed seals for flat parts. It creates an elastic film. Allows easy disassembly of the parts. Extra thin ...
arexons
... difference to gaskets cut from one piece. In test results it can be seen that at an applied gasket pressure of 20MPa both the welded and the single-piece gasket reach a leakage class ...
Teadit
... spiral wound gaskets in different locations world wide. The biggest production site is located in Brazil where TEADIT® manufactures spiral wound gaskets already since 1965. Spiral Wound Gasket ...
Teadit
Temperature limit: -40 °C - 455 °C
Pressure limit: 345 bar
Teadit® Kammprofile gaskets offer outstanding flexibility, assuring seal integrity under pressure and temperature fluctuations, flange rotation, bolt stress relaxation and creep. Teadit® Kammprofile ...
Teadit
... manufactures a wide variety of components, which includes static seals. The static seals are available in four models such as unsplit, split, envelopes and as well as O-rings. A static seal ...
PTFE Competence Center GmbH
At Laygo, we are dedicated to produce the best plate heat exchanger gaskets in the market. We pride ourselves with being the high quality alternative to your regular OEM gaskets and, since 1982, know ...
... Laygo gaskets for their heat exchangers. The secret behind the quality of our gaskets is that we do not compromise on quality. That is why our manufacturing process is significantly different to that ...
... (FIP) and CURE-IN-PLACE (CIP) Gaskets DYMAX form-in-place (FIP)/cure-in-place (CIP) gaskets cure completely in seconds - even to 1/4 inch thick beads - with good compression set. UV/Visible light curing, ...
DYMAX Europe GmbH
Diameter: 22 mm
Unit - Each - Qty. Rounding - 10 - Long description - Bonded seals TT/TM - Technical information - The Multiseal centres itself well. Multiseal type SC has an extra inside centring flange, the diameter of ...
PTFE, Modified PTFE & Expanded PTFE Gaskets PTFE, PTFE compunds and expanded PTFE are compound products which offer good mechanical, electrical and thermal properties as well as chemical resistance, a low friction coefficient ...
DONIT TESNIT, d.o.o.
Temperature limit: -30 °C - 204 °C
... resistance. Features and Benefits: Easy by-hand installation — no need for an arbor press Uses less energy than contact lip seals Non-contact engineered labyrinth design reduces shaft drag Non-wearing components Engineered ...
Garlock
Temperature limit: -250 °C - 200 °C
Pressure limit: 0 Pa - 100,000,000 Pa
Diameter: 15 mm - 3,000 mm
... the sealing lip. These seals are deeply rooted in history, being created by a sealing pioneer to solve cryogenic issues in the first space missions. Watch the Omniseal® origin story or read about its history to see ...
Saint-Gobain Performance Plastics
Umbrella Seal Part For Use With Number Cable Size 160-071-005 VLD, 2 160-071-006 VLD, 3 160-071-007 VLD, 4 160-071-008 LD, 2 160-071-009 LD, 3 160-071-010 LD, 4 160-071-011 MD, 2 160-071-012 MD, 3 160-071-013 MD, 4
Diameter: 35 mm - 169 mm
Technical Information MATERIAL NR = Natural rubber
Temperature limit: 0 °C - 650 °C
Boss Seals work as a direct replacement/upgrade for elastomeric O-rings on MS-33514 flared and MS-33656 flare-less fitting ends, installed into MS-33649 fluid bosses. Boss seals are designed to withstand ...
Parker Composite Sealing Systems Division
Panel-Clamping Strips Retrofit panels in closed frames Existing constructions do not need to be opened up Virtually flush with the outer surface of the profile Panel-Clamping Strip 6 Al, natural Panel-Clamping Strip 6 2-4mm, ...
Our wide range of polymer-coated fabrics custom is designed for vapour seal applications and manufactured to meet the demanding challenges of evaporation, storage and pressure containment in the petroleum, petrochemical ...
Dunlop grg
Pressure limit: 0 bar - 450 bar
Diameter: 20 mm - 220 mm
... industries, downtime kept to a minimum due to the quick maintenance nature of this pipe flange seal. The ease of maintenance feature involves the ability to remove the seal, which is supported within ...
Brazing and Glass-to-Metal Sealing Jigs Sealing Jigs for Brazing and Glass-to-Metal Made of RINGSDORFF® Graphite Graphite jigs are used in the production of semiconductor encapsulations by glass-to-metal sealing or brazing connections. ...
Diameter: 12 mm - 520 mm
... Avantages ► The SPI seal is ideal for rotating parts ► The lip seal ensures a firm and permanent contact to guarantee dynamic sealing ► The SPI joint is available as a single or double lip Specifications The ...
PAULSTRA
Temperature limit: -15 °C - 85 °C
Diameter: 0.5 in - 2 in
Made from Polyurethane 90 Designed for application in high pressure conditions For static applications, prevents leakage Excellent abrasion resistance and tear strength Temperature resistance: -15°C + 85°C Hardness ...
Temperature limit: 260 °C
Diameter: 10 mm - 300 mm
... grade and fillers to match required applications. 3P has recently developed new solutions with conductive PTFE to protect seals and bearing from electrostatic discharges in high speed electric motors. Strong partnerships ...
3P Produits Plastiques Performants
Temperature limit: -20 °C - 80 °C
Pressure limit: 0 Pa - 120,000,000 Pa
Diameter: 10 mm - 610 mm
Performance and Purpose 1.The sealing component is made up of a polyurethane sealing ring and fan-shaped supporters. It is mainly used in the pressure test of steel pipe by hydro-static testing machine. 2.In the non-working state ...
beijing Jianke Huifeng Science and Technology
The Advancap™ rod and piston seals are designed to provide a cost-effective cap seal solution that prevents extrusion and eliminates O-ring spiral failure in dynamic applications. Each seal ...
GREENE TWEED
... labyrinth design with a shut-off design that really works. Features: Verification Tested contacting & non-contacting bearing seal designs Proven to increase equipment reliability in pumps, electric motors, fans, ...
AESSEAL
Please specify:
Help us improve:
remaining