- Materials - Tools - Components >
- Standard Mechanical Component >
- Seal >
- Essentra Components
Essentra Components seals
Anvis Decize S.A.S. DILATOFLEX® expansion joints are totally manufactured in our plant in Decize (France) Joints BPO (os)-U-BC1 very big length (over 40m), for nuclear power plant or another application
Temperature limit: -60 °C - 450 °C
... : glass fibre braided sleeving around glass fibre knitted rope with a core coating with silicone rubber Applications • Seals for doors of inserts, boilers, lingot moulds...
Temperature limit: -60 °C - 250 °C
... : glass fibre braided sleeving around glass fibre knitted rope with a core coating with silicone rubber Applications • Seals for doors of inserts, boilers, lingot moulds...
PLATE PACK SEAL HIPO Seals are available for flat face, corners of the platen frames which ensures leak-proof operation of the Filter Presses. Seals are available in solid rubber ...
Temperature limit: -50 °C - 230 °C
TCOR Thermally Conductive Oxime is a single component, high thermal conductivity RTV for the effective bonding or gap filling in electronic devices. TCOR RTV Thermally Conductive Oxime is a single component, 100% solids, low odour ...
Diameter: 6 mm
Outer diameter: 12 mm
The seal is generally used to protect effectively linear ball bearings from dirt. Its main advantage is that it is inexpensive, it is also easy to assemble. The seal is not recommended if the brake effect ...
Diameter: 60 mm
Outer diameter: 90 mm
The seal is generally used to protect effectively linear ball bearings from dirt. Its main advantage is that it is inexpensive, it is also easy to assemble. The seal is not recommended if the brake effect ...
Pressure limit: 0 Pa
Caps, bonded seals and copper washers provide replacement seals for adapters
Novagum produces all kinds of silicone seals for vacuum casting machines. Used with the following manufacturers: Yasui, Indutherm, Shultheiss, Italimpianti goldsmiths, Gallons, Mario di Maio, Topcast.
Diameter: 0.5 in - 12 in
SIZE: 1/2"~12" Key words: Flange gasket Category: Valve Series
Diameter: 63 mm - 630 mm
Outer diameter: 107 mm - 695 mm
... tightness of two flanges is influenced by the choice of the suitable gasket. By contrast with simple flat gaskets, profile gaskets enable the compensation of small angular deviations. The flange connection is already ...
General purpose of gaskets is to avoid leakages, but for glass-lined equipment, it’s a lot more: the gasket protects the integrity of the glass-lined vessels and reactors. A wrong gasket ...
Temperature limit: -40 °C - 220 °C
Diameter: 40 mm - 160 mm
... principle of multiple lip-sealing technology and eliminates the requirement of not only a barrier-fluid but also any chances of seal-face contamination into the product. The specially developed system between the shaft ...
... mould seal for use as a resin seal in 'Light' RTM or RTM tooling • Used to reduce seal drag when closing the mould where flanges are too steep for conventional seals ...
Diameter: 8 mm - 150 mm
Food Jar Seals are manufactured with a food-related end use in mind. Therefore, maintaining the high-quality standards, which the industry demands ranks high among the company's list of priorities. The rings are recommended ...
Temperature limit: 21 °C - 154 °C
Diameter: 11 in - 148 in
Outer diameter: 21.6 mm - 165.4 mm
EPDM gaskets offer quality performances in sanitary applications with repetitive steam-in-place (SIP) cycles. These sanitary gaskets have been designed to achieve a smooth bore, contamination free fluid ...
Temperature limit: -40 °C - 70 °C
... Typical Applications: • Server faceplate and blade cards • Electronic enclosures • Consumer electronics • Door seals • EMI window / vent seals • Grounding applications
Parker Chomerics Division
Temperature limit: -54 °C - 371 °C
Permatex Ultra Copper is a high temperature RTV gasket maker, resisting temperatures up to 700°F (371°C). Ultra Copper is tested to exceed OEM specifications and is ideal for high temperature applications such as turbocharger ...
Outer diameter: 1.46 in - 2.69 in
Thermostat Seals Gaskets: Cuts installation time in half. Adhesive-backed gasket material helps prevent breaking of water outlet. Gasket cement is not needed. Approved for Marine ...
Temperature limit: -30 °F - 400 °F
Diameter: 6 mm - 50 mm
Outer diameter: 6 mm - 50 mm
... retaining rings and BSPP bonded seals. Applications: • Replacement o-rings, seals and retaining rings for fitting and adapters in hydraulic fluid and gas handling connections Product Type O-rings, ...
Plates Dimension- and Torque range in Press technology. For dry- and wet-running clutches and brakes, Ortlinghaus is able to provide a very comprehensive range of plates. The plates and the friction surface are important functional elements ...
Seals protect the bearing against external contamination and prevent lubricant from leaking. Seals for needle-roller bearings are tailored to their low installation heights.
Diameter: 80 mm - 300 mm
Seals for cast-iron pipes used for drinking water. Suitable for use in water distribution applications. Coated with anti-friction varnish
Diameter: 6 mm - 95 mm
Outer diameter: 14 mm - 120 mm
... oil seals and grease seals. Rod seals are radial seals. The seal is press-fit into a housing bore with the sealing lip contacting the shaft. Piston ...
Pressure limit: 8 bar - 70 bar
Diameter: 50 mm - 1,000 mm
Nominal pressure: the corresponding nominal pressure of double-seal super-strong connection should conform to requirements in the table below.
Temperature limit: 250 °C
Diameter: 60 mm - 630 mm
... U-shaped seals for 1 mm and thinner for 2 mm. The seal is only slipped over one of the two lips. Provided that the U seal is resistant enough to the materials used, no leakages have been ...
Fr. Jacob Söhne GmbH & Co. KG
Lower operating and maintenance costs Superior flame shaping Increased firing of alternative fuels Long refractory life Lower emissions Efficient conventional and alternative fuel firing with our kiln burner With a unique design ...
Plunger Pump Packing Seals Series numbers are the first three digits of the model number and correspond to the plunger diameter. Seal material is indicated by the ninth character in the model number. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining