FESTO pneumatic valves

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devicesions due to special features ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal materials ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal ...

DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C

... Operator Port Connections. More Number Of Gland Packings At Valve End & Operator End For Longer Life. Operator With Threaded / Namur Ports. Lubricated Pilot Air Not Necessary. Applications: Air ...

DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... - Easy to install, even in confined spaces: compressed air inlets with G 1/4” threaded adjustable connections to enable alignment with the piping. PPGR connections prevent any risk of corrosion. - New valve ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 63 mm - 110 mm

BASIC HYDRAULIC VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

DN: 63 mm - 110 mm

HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... and resets locally. When the pneumatic dry pilot detection line is exposed to flame heat, its automatic fire sprinklers shatter-open, while venting the air pressure from the FDV-DP0’s actuator, commanding ...

... ensures high flowrates with minimum head loss * The valve trips open automatically upon a gradual release of water pressure from its control chamber.The valve is actuated by Dry Pilot Line’s pneumatic ...

Introducing FPS-SIPO: the pinnacle of precision control for pneumatic systems. FPS-SIPO, standing for Single Interlock, Pneumatic, Local, is meticulously engineered to seamlessly integrate into industrial ...

SMBA PNEUMATIC MODEL based on SMB The gear transmission mechanism inside of unit is based on that of the SMB model. Air motor is driven and operated by a supply of air, and SMBA is ideal for use in ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C

special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator

DN: 65 mm - 150 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 55 °C

system ball valve, solid version space-saving wafer flange version with high-quality stainless steel bushes modular upgrading of connection possible up to flange version in DIN face-to-face dimension excellent flow ...

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...

DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...

DN: 6, 8, 10, 12 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C

Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. ...

DN: 0.5 in - 2 in

INDUSTRIAL USE Spring return or double effect pneumatic actuator 3-way FFF BRASS ball valve, full bore See the above-mentioned diagram. In the opening phase, the actuator provides a decreasmg ...

DN: 8 mm - 100 mm

PNEUMATIC VALVE – 2 WAY FF BRASS INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF BRASS ball valve, full bore The Pneumatic ...

DN: 8 mm - 100 mm

PNEUMATIC VALVE – 2 WAY FF AISI 316 INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF AISI 316 ball valve, full bore ACCESSORIES ON ...

DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C

Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...

Pressure: 0 bar - 40 bar
Temperature: 95 °C

Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure ...

DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...

DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...

DN: 0.25, 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

... made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ Medium - Compressed air

DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C

Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar

... sized globe valves and segmented control valves offered by other companies. Athena control valves offer fast response times to control signals due to advanced digital control of actuation ...

DN: 40 mm - 300 mm
Pressure: 16 bar - 420 bar

Multil-stage Depress Pressure Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation: PDL pneumatic diaphragm actuator、PCL pneumatic ...

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Pneumatic gate valve body material: Stainless steel, Carbon steel end connection: RF, BW, RTJ operation: electric /pneumatic/ hydraulic actuators

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...

DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...

DN: 150, 200, 250 mm
Pressure: 10 bar

The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves ...

Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...

Knife gate valves are designed to isolate the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min

Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C

Pressure: 3 bar - 35 bar