Festo Process stainless steel valves

DN: 50, 65, 80 mm
Pressure: 0.5 bar - 1.5 bar
Temperature: -20 °C - 80 °C

The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...

DN: 0.25 in - 0.5 in
Pressure: 7,250 psi

... 100% shell & inline leak tested Marine classification (on demand): DNV GL, LR, BV, ABS, KR, RINA, others Materials Stainless steel body & ends All materials compatible for Hydrogen use

DN: 0.5 in - 1 in
Pressure: 15,000 psi

... ISO 19880-3:2018 Gaseous hydrogen – fueling stations valve 100% shell & inline leak tested Marine classification (on demand): DNV GL, LR, BV, ABS, KR, RINA, others Materials Stainless steel ...

DN: 0.25 in - 6 in
Pressure: 3,700 psi
Temperature: 650 °C

... seat design is comprised of a metal housing and polymer insert machined as a single unit which provides bubble tight shut-off (Rate A), combined with lower operating torque. Materials: Stainless Steel, ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

DN: 15, 20 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C

... -way ball valve with male thread Producer Medium: Compressed air, vacuum, inert gases Material of casing: Brass nickel-plated Material of nut: Brass nickel-plated Material of seal: NBR Material of locking ...

DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C

2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material ...

DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C

... Verbindungselemente beachten. Abweichende Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Material Stainless steel housing, ball and operating shaft POM ball seal NBR O-ring

DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa

Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 ...

DN: 3 mm
Pressure: 0 bar - 200 bar

Stainless steel Control- and shut-off valves (e.g. for the pressure regulator outlet) For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable ...

DN: 50 mm - 60 mm

Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...

DN: 8 mm - 80 mm
Pressure: 64 bar

Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.

DN: 0.25 in - 2 in
Pressure: 64 bar

Housing and ball made of 1.4408. Sealing material: PTFE / FKM.

DN: 8 mm - 50 mm
Pressure: 64 bar

A-4BVG 90 ° switching, with flange for actuators to DIN / ISO 5211, with parallel BSP thread to DIN / ISO 228 Housing and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height of centre axis ...

DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C

Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...

Pressure: 530, 630 bar

All parts of 316L steel and counter flanges of X2CrNiMoN22-5-3 1.4462 (DUPLEX) material are used in this valve. Due to the occurrence of working pressures of 530 bar, the valves were ...

DN: 0.5 in
Pressure: 320 bar
Temperature: -196 °C - 400 °C

... valves are made of stainless steel and the acid-resistant valves are made of acid-resistant steel, with the exception of the tempered stainless steel ...

Pressure: 16, 25 bar
Temperature: -196 °C - 400 °C

... the steel version, the body seat welded with acid-resistant electrode increases the durability of the valve. The pin with plug is made of tempered stainless steel. Corrosion-prone ...

DN: 50 mm - 300 mm
Pressure: 300 psi

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside & outside the body

DN: 2 in - 12 in
Pressure: 250, 200, 300 psi
Temperature: -10 °C - 82 °C

Sizs: DN50/60~DN200/219 Working pressure: PN25, 362psi Valve stardard: AWWA C515 Grooved Standard: AWWA C606 Temperature range: 0º ~ 80º C

... flapper. The surface of the site is made of hard chromium or AISI 316 stainless steel welded filling, so the surface of the site is resistant to abrasion and corrosion. Our butterfly valves ...

DN: 65 mm - 150 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 55 °C

system ball valve, solid version space-saving wafer flange version with high-quality stainless steel bushes modular upgrading of connection possible up to flange version in DIN face-to-face ...

Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F

Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...

Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated

Pressure: 200, 350 bar
Temperature: -18 °C - 105 °C

... process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system. * Use whenever ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...

DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C

... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...

DN: 1, 2 in
Pressure: 8 bar

... The CELTIC N is build totally in stainless steel and the diaphragm in FEP result in compatibility with practically all blanketig processes. Materials: Body: Stainless Steel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel ...

DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... without drain port (drain valve cannot be added) spindle thread not in contact with medium wear-resistant stainless steel valve seat with a black handwheel ...

DN: 15, 20, 25, 32 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... opened indication of pre-setting on bracket without drain port (drain valve cannot be added) Open position indicator wear-resistant stainless steel valve ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...

DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP · NPT · BW · SW ISO-5211 mounting pad to mount directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...

DN: 150 mm - 610 mm
Temperature: 80 °C

... Flange Options Standard flange Custom flanges are available Material Contact Options Carbon steel, 304 stainless steel, 235 BHN abrasion-resistant steel, SAE 660 bronze

DN: 50 mm - 255 mm
Temperature: 80 °C

... Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 stainless steel Position ...

DN: 100 mm - 455 mm

... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control over flow rates. ...

DN: 8 mm - 50 mm
Pressure: 50 bar - 63 bar

Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Socket weld rotating - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...

DN: 40 mm
Pressure: 50 bar - 63 bar
Temperature: -50 °C - 185 °C

Model: - 3 piece body - Material body: - Stainless steel EN 1.4409 Connection: - Thread BSPP ISO 228-1 - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar ...

DN: 0.5 in - 1 in
Pressure: 6 bar
Temperature: 180 °C

Model: - Straight adjustable - Material body: - Stainless steel 1.4408 / CF8M Connection: - Thread BSPP ISO 228 - Material seats: - FKM / PTFE Including: - Pressure gauge Note: - Clean steam Pressure ...

DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C

... Pressure 2.5 to 8 bar (Based on 5.5 bar air supply as standard) Body Aluminum alloy Ambient Temp -15 to 8 oC (Low and high temp versions also available) 0 Springs Stainless Steel Cycle ...

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical ...

DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C

... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...