FLUX fuel flow meters
Volumetric flow rate: 0 us gal/min - 120 us gal/min
Process pressure: 5,000 psi
Ideal flow meter for oils, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol® and other non-abrasive lubricating fluids, such as in the process of measuring cylinder position ...
AW-Lake Company
Volumetric flow rate: 15 l/h - 450 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 30 bar
Fuel consumption instrument is using the positive displacement principle to dynamic monitoring vehicle fuel consumption, its measurement accuracy is not affected by bumpy road, display or totalizer Optional, ...
Soway Tech Limited
Volumetric flow rate: 20 l/h - 300 l/h
Process temperature: -40 °C - 80 °C
Process pressure: 1.8 bar - 3.4 bar
what is Diesel Flow Meter? The diesel flow meter is a device to measure linear, nonlinear, mass or wide flow rate ...
Flowtech Measuring Instruments Pvt. Ltd.
Process temperature: 0 °C - 150 °C
Process pressure: 0.2 bar - 300 bar
... low flow rates with reasonable accuracy. The units may be used for additive flows, fuel consumption metering, perfumes, colourings etc. With this design a range of interchangeable metering ...
Volumetric flow rate: 0 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 25 bar
... Warranty term – 3 years, without fuel flow limitation; Smart software data processing; Deaerator will help to exclude air from the fuel system. Note: Most diesel ...
Mechatronics
Volumetric flow rate: 5 l/min - 100 l/min
Process pressure: 120,000 Pa - 350,000 Pa
... the best choice of fuel dispenser component. fuel dispenser parts, pump/meter/nozzle, 30year experience on Fuel Dispenser Hot Tags: JSJ1 And JSJ5 Meter, ...
Zhejiang Jiasong Technology Co., Ltd.
Volumetric flow rate: 10 l/min - 150 l/min
Process pressure: 0 bar - 3.5 bar
FMS-P is a digital flow meter designed to control the transfer system, allowing the fuel to be supplied only to authorised users. The authorisation is given by the owner of the system ...
Volumetric flow rate: 1 l/h - 580 l/h
Process temperature: -20 °C - 120 °C
Process pressure: 38 bar - 400 bar
... available, making the product safe to use in flammable liquid applications Typical Applications Fuel additive injection Fuel consumption measurements Diesel injector/pump test ...
FLOMEC
Volumetric flow rate: 0.5 l/min - 1,200 l/min
Process temperature: -40 °C - 350 °C
Process pressure: 0 bar - 150 bar
... versions of the Metri Paddlewheel flow meter will withstands pressures up to 100 bar as standard with higher pressure options also available. Metri LPM paddlewheel Flow Meters ...
Metri Measurements
Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 86,000 Pa - 106,000 Pa
1.small diameter type 2.Alcohol,fuel,oil 3.female thread connection GTF300 diesel turbine flow meter is a new generation turbine flow meter ...
Xi'an Gavin Electronic Technology Co. Ltd.
Volumetric flow rate: 5 l/min - 60 l/min
Process temperature: -25 °C - 55 °C
Process pressure: 0.12 MPa - 0.35 MPa
ØTDW-BT55 flow meter with cast iron body and nodular cast iron distribution valve, adopts advanced technology, which can be widely used on different gasoline dispensers. ØThis product has advantages ...
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 0 bar - 10 bar
The K33 and K44 nutating disk meters measure the exact quantity of a lubricant or fuel. They are designed to provide inexpensive, reliable use and calibration solutions in the workplace. For fuel ...
numak srl
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
Process pressure: 70 bar
Pulser and solenoid single valve (PSV) for oil with G 1/2" (f) connection. FLUIDSFRESH OIL SECTORSAERONAUTIC | AUTOMOTIVE | MANUFACTURING INDUSTRY CERTIFICATIONSNOT TYPE-APPROVED FOR PUBLIC USE
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 3.5 bar
Precision: 3 %
Flow meter for streaming liquids according to the measurement principle of a swashplate. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), RME, vegetable oil Plastic/aluminum ...
HORN GmbH & Co. KG TECALEMIT
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 10 bar
M3H and M4H are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining