Process temperature: -40 °C - 100 °C
... Over Voltage Protection • 1mm liquid level detecting precision • Low Power: 5mA with output low • Temperature range: -20~55℃ or - 40°C~100°C • Highly chemical resistance material: Polysulfone or ...
Intellisense Microelectronics
Level range: 12 mm
Process temperature: -40 °C - 100 °C
The optical liquid level switch consists of an infrared LED and a receiver. In air, the light beam from the infrared LED is reflected back into the receiver. When rising liquid touches ...
Intellisense Microelectronics
Process temperature: -40 °C - 100 °C
Optical liquid level switches use the light reflection principle in the prism to detect whether there is liquid at the installation position of the sensor. These optical ...
Intellisense Microelectronics
Level range: 0 m - 20 m
Process pressure: -0.1 MPa - 2 MPa
Process temperature: -40 °C - 250 °C
... and the reflected pulse is proportional to the distance and the time interval measured media. Description: Radar level sensor emits a very narrow microwave pulse, the pulse to the speed of light ...
Level range: 0.2 m - 20 m
Process pressure: -0.1 MPa - 2.5 MPa
Process temperature: -40 °C - 250 °C
Submersible type water level sensor transmitter is mainly used for petrochemical, metallurgy, electric power, pharmaceuticals, water supply and drainage, environmental ...
Level range: 0 m - 300 m
Process temperature: -5 °C - 60 °C
Capacitive, ceramic, relative-pressure sensor for precise water level measurement in ground and surface water Robust and slim design (22 mm diameter) made of stainless ...
Seba Hydrometrie GmbH & Co. KG
Level range: 0 m - 10 m
Process temperature: -20 °C - 60 °C
Compact, robust measurement system for measurement of water level using the "bubble gauge" principle High accuracy (0.05% FS) and long-term stability through smart sensor drift compensation ...
Seba Hydrometrie GmbH & Co. KG
Level range: 0 m - 100 m
Process temperature: -20 °C - 80 °C
... adapt the sensor to an existing mechanical registration level. Economical: With its float shaft, the Surfloat Sensor 4 provides an affordable alternative to a pressure sensor, ...
Seba Hydrometrie GmbH & Co. KG
Level range: 10 cm - 200 cm
Level range: 0 m - 70 m
Process temperature: -10 °C - 60 °C
It is a pressure-type sensor that measures the water level from the water pressure using a quartz oscillator. The frequency of the quartz oscillator is converted to the ...
Level range: 0.6 m - 30 m
Process temperature: -10 °C - 50 °C
... near future, but currently we do not have CE certification. This product is a non-contact laser water gauge to measure the distance and water level by irradiating the infrared laser ...
Level range: 0.5 m - 20 m
Process temperature: -20 °C - 70 °C
This is a Microwave Type Water Level Gauge(RS485) that determines water level based on the pulse propagation time. As this equipment uses microwave, it is not influenced ...
Process temperature: 5 °C - 60 °C
... contactless drip chamber sensor SONOCHECK ALD monitors the liquid level in infusion therapy, dialysis or parenteral nutrition. Small foamy bubbles are ignored by the clamp-on sensor. There ...
Level range: 0 m - 150 m
Process temperature: 0 °C - 70 °C
Hydrostatic level sensor measures the level with the help of liquid pressure, It transfers information to the control equipment by converting the pressure value formed ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 4 m
Process temperature: -20 °C - 80 °C
+- 30% / 2W Max. 300mA M68*20 Connection 0.25-0.5 Sensitivity 0.02% Resolution, Max. 4 Meter Measurement Adjustable Blind Spot <100mm 15° +/- 2° Measuring Angle Free PC Software
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 10 m - 30 m
Process pressure: -1 bar - 3 bar
Process temperature: -40 °C - 130 °C
Margin of Error: ±5 mm Process Connection: Threaded G1½ A or OPS. 1½ NPT, Flanged from DN 50 Operating voltage: 14… 36 V DC
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
The level CAP80 transducer delivers the measure of the fill level for tanks containing conductive and non-conductive liquids (water, water solutions, food liquids, ...
FIAMA
Level range: 100 mm - 3,000 mm
Process pressure: 350, 700 bar
Process temperature: -40 °C - 110 °C
The level transducers of the PCS III series are rugged, accurate, without mechanical wear between the measuring probe and the float, they are resistant to shock and vibrations and are equipped with protection against ...
S2Tech srl
Hydrostatic level probes - Any measurement range from 1 up to 500 m H2O - Integrated internal overvoltage protection circuit - Marine certificate DNV - ATEX Intrinsic safety
APLISENS S.A.
APLISENS S.A.
Smart level probes SGE-25.Smart and SGE-25S.Smart - Programmable zero shift, range and damping ratio - 4...20 mA output signal + HART protocol - Accuracy 0.1% - Integrated internal overvoltage protection ...
APLISENS S.A.
Level range: 0 m - 2 m
Process pressure: 1 bar - 30 bar
Process temperature: -40 °C - 80 °C
The Level Sensors have the following Features: - G3/8" to G2", Flange (round and oval) others on request - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - Grid: 5 or 10 mm - Overall ...
Process pressure: 1 bar - 60 bar
Process temperature: 0 °C - 125 °C
The Optical Sensors have the following Features: - M12, G3/8", G1/2", NPT - PVC-cable - M12-connector - NO in Air, NC in Air - PNP, NPN open collector - Temperature range upto +125°C - upto 60bar - upto IP67 - ...
Process pressure: 20 psi
... WLM-Sensor maintains the liquid in a container to a specified level without the use of electricity. Only a pressurized supply source is needed. Water is the typical ...
Process temperature: -20 °C - 70 °C
Capacitive level controls are widely used where it is necessary to control the level of substances both solid and liquid which may not be conductive. They are particularly used in silos ...
AECO
Process temperature: -20 °C - 60 °C
... current which is used to indicate the level. APPLICATIONS Capacitive level controls are widely used where it is necessary to control with a good safety margin of intervention the level ...
AECO
Process temperature: -20 °C - 60 °C
They work on the resistivity of liquids and sense the level via the electrodes placed in the conductive liquids. The presence of liquid between the ...
AECO
Process temperature: -40 °C - 85 °C
... data can be monitored with a browser. Alarm limit setting and hysteresis setting, alarm delay and report query. High level / low level alarm is triggered to one or more phones. The Layout of numbers ...
... content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration -Permanent, highly precise residual oil measurement (oil vapor) with PID sensor ...
... mobile measurement: The PID sensor is ready for measurement within about 30 minutes -OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, ...
Level range: 4 m
Process pressure: 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C universal filters with GL connection and flow chamber LS - Connection: ø 12 mm - With 4 m electrical ...
M&C TechGroup Germany GmbH
Level range: 4 m
Process pressure: 0 bar - 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C stainless steel universal filters with condensate drain and flow chamber LS25 - Connection: 1/4" ...
M&C TechGroup Germany GmbH
Process pressure: 2 bar - 11 bar
Process temperature: 0 °C - 60 °C
... non-conductive media. The new liquid alarm sensor type KS3 replaces the KS2. The KS3 is an adequate replacement for the KS2.Ex model. The former KS2 plastic enclosure has been replaced by a rugged ...
M&C TechGroup Germany GmbH
Level range: 10, 30, 70 m
Process temperature: -40 °C - 250 °C
... measuring range up to 70M (230ft) Resolution < 0.1% Main applications • Level measurement • Distance measurement • Storage indication • Differential level measurement • Water ...
Level range: 3,000, 6,000 mm
Process pressure: -1 bar - 40 bar
Process temperature: -40 °C - 150 °C
... measure the level of liquids by adopting the principle of time difference caused by radar waves, so it can detect the surface of the medium. Our RB series is suitable for detecting any liquids, ...
Level range: 3 m - 8 m
Process temperature: -40 °C - 80 °C
For liquid, powder, small bulks and flat surface materials Non-contact and continuous measurement Sensing materials: Liquids Adopts temperature compensation technique on speed & frequency Independent ...
Level range: 0 m - 200 m
Process temperature: 0 °C - 80 °C
... model LV35 submersible Liquid level transmitter is designed for use in applications where the pressure is created by corrosive pressure media. The pressure diaphragm is made from tantalum and the housing ...
Level range: 6 m
... casing head IP 67 • The UFM is an ultrasonic sensor for continuous level measurement without contact with the fluid. Advantage • Principle of measurement without contact • Options for distance, ...
Level range: 0 m - 6 m
Process pressure: 0 bar - 20 bar
Process temperature: -30 °C - 105 °C
Brass ─ Spansil Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual ...
VAL.CO srl
Level range: 0 m - 6 m
Process pressure: 0 bar - 50 bar
Process temperature: -30 °C - 105 °C
Brass ─ Spansil Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual ...
VAL.CO srl
Level range: 0 m - 5 m
Process pressure: 0 bar - 6 bar
Process temperature: -30 °C - 105 °C
Brass ─ Spansil Measuring resolution 5 – 10 – 20 mm Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual ...
VAL.CO srl
Level range: 160 mm - 700 mm
Process temperature: -25 °C - 70 °C
Range10-180 Ω FlangeØ 70 mm Flange holes5 holes Bolt circleØ 54 mm Float ØØ 42 mm Float materialNBR Holes Ø5,25 mm Max voltage28 VDC CustomizationOther lengths on request calibration
Level range: 160 mm - 700 mm
Process temperature: -25 °C - 70 °C
Range300-10 Ω FlangeØ 70 mm Flange holes5 holes Bolt circleØ 54 mm Float ØØ 42 mm Float materialNBR Holes Ø5,25 mm Max voltage28 VDC CustomizationOther lengths on request calibration
Level switch fitted on the inside of the tank to activate a remote and/or local alarm when the tank requires refilling.
Level range: 0 m - 35 m
Process temperature: -40 °C - 80 °C
... principle The so-called pulse procedure sends a short microwave impulse to the water surface. Afterwards the sensor remains in standby for a short time. Within this time the water reflects ...
Process temperature: -40 °C - 65 °C
... are designed to provide a high level of sensitivity, stability and durability for powder and bulk solids applications, as well as liquid and slurry applications. Monitors two-year warranty stands behind ...
Please specify:
Help us improve:
remaining