Process temperature: -20 °C - 200 °C
Process pressure: 0 Pa - 2,500,000 Pa
... installed. FDM Mini Float Level Switch, Lquid Level Switch (Food Grade) FC/FD series is a magnetic float level switch type of product ...
Mütec Instruments GmbH
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 35 bar
The FC/FD series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the FC/FD magnetic float level switch ...
Mütec Instruments GmbH
Process temperature: -20 °C - 170 °C
Process pressure: 0 bar - 4.5 bar
... FAB Cable Float Level Switch, Lquid Level Switch (Food Grade) The FA/FB series cable float level switch is designed for single (FA) ...
Mütec Instruments GmbH
Process temperature: -20 °C - 50 °C
Combined sewers overflow monitoring or Sewers overflow monitoring IJINUS presents the new overflow detector, incorporating CapAir® technology, an IJINUS patent, simplifying installation ...
Process temperature: -40 °C - 130 °C
Top mounting level switch from 1 to 4 thresholds Materials: SS304, SS316, PVC, PP, PVDF Certifications: for safe area and for ATEX classified area Connections: threaded from 1½ "to ...
Process temperature: 0 °C - 70 °C
The WBF33A30-0 Series, manufactured by Comus Group®, which has a 240 Vac voltage switch that can hold a 100 Watts maximum 10 Watts in a minute and has a solid state output resistance. Furthermore, it has a 30° degrees ...
The Comus Group
Process temperature: -10 °C - 125 °C
... leave residue. The OPT-A2 model is an electro-optic level switch, manufactured by The Comus Group. This product has a maximum 100 mA load current with 10-28 Volts DC power supply. The switch ...
The Comus Group
Process temperature: -10 °C - 125 °C
An optical level switch works by emitting a beam of infrared light within a prism and measuring the amount of light received. When the measured fluid reaches the sensor the amount of emitted light received ...
The Comus Group
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 6 bar
1 to 6 switch points Lenght up to 5 mt. The principle of operation of these instruments is based on the drive of one or more magnetic reed contacts, placed inside of the measuring rod, by one or more ...
VAL.CO srl
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 50 bar
... that, for variety of materials and dimensions, offers to the user a simple and economical solution forthe control of liquid levels. The units are available with connection cable in lengths of 1.5 m and 3.0 m, other lengths ...
VAL.CO srl
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 4 bar
... actuation of a reed contact by a magnetic float. The only moving element is the float that moves due to the hydrostatic thrust. A sturdy product and maintenancefree. • Construction entirely in ...
VAL.CO srl
Process temperature: -20 °C - 50 °C
The Auto-Set flush probe represents a low profile RF capacitance plug switch level monitor. The unit is specifically designed for used in tight fitting applications to detect levels ...
Process temperature: -40 °C - 100 °C
... Polarity, Over Voltage Protection • High Performance ASIC based compact Sensor • Technology: optical sensor • 1mm liquid level detecting precision • Low Power: 10mA with output low • Temperature range: -20~55℃ ...
Process temperature: -40 °C - 400 °C
Process pressure: -1 bar - 100 bar
GCAS level switch is a capacitive level sensor used for level control in conductive liquids, low conductivity liquids, powdery materials with solid particles, sticky ...
Process temperature: -40 °C - 250 °C
Cape-11R Rope RF Admittance Level Switch is specially designed for top-mounting applications in which the probe length is longer than 2 meters. A cable component is connected to extend the probe end. ...
Process temperature: -20 °C - 150 °C
Magnetic float level controls for liquids are made of a reed contact placed inside the shaft and an operating magnet placed in the float which runs due to the increase or decrease of the liquid to detect. The ...
Process temperature: -40 °C - 150 °C
Process pressure: 16 bar
The vibration level controls are using when it is necessary to ascertain if solid powder or granular substances are at their minimum or maximum depths. They are used for level control in silos for the ...
Process temperature: 0 °C - 90 °C
Process pressure: 10 mbar
... • Up to 4 levels • 5 meters high • PVC or PP materials with flange support • EPDM or FPM seals • EPDM or FPM signal • 30mA / 24VDC signal • Reliable pressure determination for ...
Process pressure: 2 bar - 6 bar
Our Float Switch with Pneumatic Output (Float Switch) is designed to be mounted into the top of a tank into which access is possible to secure the locknut and float. The float switch ...
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 1 bar
... Low cost polypropylene level switch - Hermetically moulded, double chamber - Mercury free operated micro switch - Adjustable switch differential - ...
NIVELCO Process Control Co.
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 100 bar
Magnetic Level Switches M For liquids Contact: max. 4 reed switches Connection: G 1/8...G 2 male, flange: DN50..DN125, 11/2....-4" Material: brass, st. st., PVC-U, PP, PVDF, NBR Max. pressure: 100 bar Max.temperature: ...
KOBOLD INSTRUMENTATION
Process temperature: -20 °C - 150 °C
Process pressure: 16, 10 bar
... chemicals, control of naval transport level, on / off pump by level, remote control level of raw materials reception and top-level alarm. Materials EN 1.4404 (AISI ...
Process temperature: -50 °C - 300 °C
Process pressure: 10 bar - 400 bar
Detection level of dosing tanks. steam condensate, hot water storage, on / off pump control, maximum-minimum level control. Materials EN 1.4404 (AISI 316L), PVC, PP, PTFE, PVDF Leven detection Micro-switch ...
Process temperature: -40 °C - 85 °C
Process pressure: 0 bar - 260 bar
Main features • No moving parts • Hermetic construction, sealed electronics • Minimum degree of protection IP65 About The optical sensor is located in a metallic body which includes a polysulfone prism inside of which ...
Process temperature: -5 °C - 50 °C
Process pressure: 0 bar - 5 bar
PVC Level Switches Materials of constructionAll PVC Actuation points LM1 – 1 actuation point N.C./N.O. contact LM2 – 1 actuation point SPDT contact LMM1 – 2 actuation points N.C./N.O. ...
ELETTROTEC s.r.l.
Process temperature: -20 °C - 60 °C
... even with Atex certification for applications in areas with danger of explosion. The process connections are of various types, threaded, flanged or sanitary types. The CLS9 and CLS5 models are suitable for installation ...
SGM LEKTRA
Process temperature: -20 °C - 60 °C
... even with Atex certification for applications in areas with danger of explosion. The process connections are of various types, threaded, flanged or sanitary types. The CLS9 and CLS5 models are suitable for installation ...
SGM LEKTRA
Process temperature: 150 °C
Process pressure: 25 bar
... meters Description Resistive instrument, rod probes, including multi-electrode, for the liquid level control in food, pharmaceutical or in general industrial processes.
SGM LEKTRA
Process temperature: -40 °C - 121 °C
Process pressure: 0 bar - 21 bar
... Multi-Point Level Switch is a compact and versatile, low-cost, plastic liquid level switch with a broad choice of mountings and float materials. It is ...
GEMS SENSORS & CONTROLS
Process temperature: -40 °C - 80 °C
Process pressure: 10 bar
... material based upon your application media. This liquid level switch package is widely applied in bulk storage and process tank level applications as a high level alarm ...
Flowline
Process temperature: 105, 110, 80 °C
Process pressure: 100, 150, 60 psi
... prices. For general use, potable water or acids, a polypropylene level switch is just what you need, while a nylon level switch with Buna-N float provides ...
Strain Measurement Devices
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar
... Polyacethal Delrin - standard (PTFE or PVC optional) / Sensor for SC750DC: PTFE - standard Enclosure Material: Nylon High level alarm Low level alarm Pump protection ...
Sitron
Features • - Low cost level switch • - Limit switch or differential switch versions • - High or low fail-safe mode • - Plastic or stainless steel ...
Process temperature: -10 °C - 65 °C
... float switch 2000.0 with PG 7 thread is frequently used for level detection in medical applications. The compact design and reliable measurement also make this float switch ideal for ...
Process temperature: -5 °F - 150 °F
... secured micro switch. When the level switch changes position in the liquid, the hermetic micro switch is activated by a moving weight. Electrodes give an alarm or a ...
Please specify:
Help us improve:
remaining