GEMU diaphragm valves

DN: 15 mm
Pressure: 6 bar
Temperature: 40 °C

... structure with a minimum number of connection points Long service life of membranes and actuators MVB200 with an additional quick-rinsing function by a second row of valves

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator

DN: 12 mm - 15 mm
Pressure: 6 bar

compact design with high flow capacities integrated lift limitation visual position indicator ideal for realising switching functions in restricted installation spaces

DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C

The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...

DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C

The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on ...

DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C

The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the ...

DN: 4 mm - 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

This speed controller fixes the operation speed of driving device. It is best suited for use with mass-produced dedicated machines. Orifice bore φ0.1mm and φ0.2 mm are added. Orifice bore can be selected from φ0.1mm to φ2 mm, in ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...

DN: 15 mm - 900 mm
Pressure: 16 bar - 420 bar

Sliding Stem Valves Series body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) alloy steel end connection: RF/RTJ/BW operation: Diaphragm/ motor/pneumatic ...

DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar

Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic piston ...

DN: 40 mm - 450 mm
Pressure: 16 bar - 420 bar

... Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation: PDL pneumatic diaphragm actuator、PCL pneumatic piston actuator、Electric actuator product ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...

Pressure: 25 psi - 250 psi
Temperature: 71 °C

DN: 2 in - 12 in

Model RAF, Altitude Valve closes at a preset maximum water level to prevent overflow of a ground storage tank or reservoir and opens to refill when the water level in the tank or reservoir lowers. Features ◆ Maintains ...

DN: 1.5 in - 10 in
Pressure: 0 psi - 144.2 psi
Temperature: -15 °C - 80 °C

... , The Diaphragm design Float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified ...

DN: 1.5 in - 12 in
Pressure: 1 bar - 13 bar

Model DTR / DFR, Diaphragm pilot control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines ...

DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Series of quick exhaust valves in nickel-plated brass and in stainless steel

Pressure: 250 bar

CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...

DN: 10 mm - 100 mm
Temperature: -20 °C - 60 °C

... only remove 4 screws • Box with two end of career – Electromechanical – Proximity NAMUR – PNP Proximity • Pilot Solenoid Valve 3/2 and 5/2 way • Robust pneumatic actuator

DN: 15 mm - 100 mm
Pressure: 10 bar

• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN10 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...

DN: 15 mm - 32 mm
Pressure: 6 bar

• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...

DN: 0.5 in
Pressure: 30 psi - 125 psi

Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. ...

Pressure: 30 psi - 150 psi

Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...

DN: 3 mm - 24 mm

M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...

DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C

for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...

Temperature: 330, 180, 265 °C

... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and ...

Temperature: 180, 260 °C

The most reliable and durable valve Our patented compact Purged Lip Sealing Valve (PLSV) is a disruptive analytical valve that offers the best of both worlds: a longer lifetime than ...

... complexity. Our Purged Pulse Diaphragm Valve (PPDV) changed all that. Using the static purge principle to purge the valve’s inner volume through the actuation gas, it works for applications ...

DN: 3 in - 24 in

M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...

DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C

... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...

DN: 1, 2 in
Pressure: 8 bar

The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...

DN: 0.5 in - 4 in
Pressure: 150 psi

SIZE: 1/2"～4＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI