Grundfos corrosion-proof pumps

Flow: 20 l/h - 170,000 l/h
Pressure: 120, 15 bar
Fluid temperature: 0 °C - 300 °C

... material selections, these chemical pumps are suitable for even the most difficult of tasks and maintain their reliability and dosing accuracy in vacuum and high-pressure applications. Typical areas of ...

Flow: 5.5 l/min - 135 l/min
Head: 1 m - 20.3 m
Power: 5 W - 260 W

Highly reliable, compact magnetic drive pumps. Field-proven reliability A large number of pumps in this series have been delivered to customers at home and abroad, earning high ...

Flow: 1,181 l/h
Pressure: 12 bar

... metering pump, also known as the MACROY® pump, is now NSF/ANSI 61 and 372 certified for municipal compliance and safety assurance. Capable of handling pressures up to 175 psi (12 bar) and flow rates ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive and hazardous ...

Pressure: 16 bar

Features •Reliability and quality •Superior corrosion resistance •Easy maintenance •Lower operating costs Specifications •Design - Close-coupled and frame-mounted •Nominal Pressure - PN16 •Lining - FEP •Housing ...

Flow: 1,200 m³/h
Pressure: 16 bar
Head: 80 m

... standardized pump – Horizontal centrifugal pump with mechanical seal; designed to EN 22858/ISO 2858/ISO 5199 dimensional standards and requirements; complemented by size 40-25-125 and 40-25-160 pumps What ...

Flow: 300 m³/h
Pressure: 6 bar
Power: 15 kW

Anti-corrosion close-coupled centrifugal pumps PMB / PMC Construction Single-stage, close-coupled horizontal centrifugal PMC pumps. Direct coupling to the motor by rigid sleeve. With ...

Flow: 0.3 m³/h - 30 m³/h
Head: 0 m - 310 m
Power: 0.55 kW - 30 kW

... on the pumps from drive side shaft sealcord seal or end-face seal manometric pressure allowed for SKA.2 pumps cannot exceed 2.5 MPa, for the remaining 1 to 4 stage pumps, manometric ...

Flow: 0 l/min - 125 l/min
Pressure: 0 Pa - 500,000 Pa

●PTFE casing ●PPG center body ●PTFE diaphragm ●Max ow 125 LPM ●Port size 1

Flow: 2 m³/h - 225 m³/h
Head: 20 m
Power: 0.8 kW - 1.1 kW

The BADU 73-1 is a non-self priming circulation pump engineered for utilization with filter units found in private pools and whirl pools. Its 4bar head allows additional functions such as being a pressure cleaner, circulation ...

Flow: 0.5 m³/h - 8 m³/h
Pressure: 10 bar
Head: 5 m - 76 m

Horizontal, Multistage EHS/K and ECB/S are non-self priming, horizontal multistage pumps, use in domestic water supply or portable application. Its suitable for hot and cold liquids, even oily water that is clean ...

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... industrial pump (⌀ 65mm). Made in 316L Stainless Steel and ABS plastic, it is for example perfectly adapted for a use in wineries. Lowmotion 2.5 is washable and it is possible to disinfect it. Light and easy handling With ...

Flow: 2.2 us gal/min - 22.7 us gal/min
Pressure: 20 psi - 60 psi

FEATURES Manual regulator provided with deep well packages. Corrosion and abrasion resistant. Shipping and carrying weight of the Quick-Set Jet is less than most conventional brands ...

Olivite™ centrifugal pumps are constructed of heavy metal, and are lined with 1/4-inch highly corrosion and abrasion-resistant liner materials (Kynar® impeller or Hypalon® liner). Olivite pumps ...

Flow: 0 us gal/min - 84 us gal/min
Pressure: 0 bar - 17 bar

... magnetic assembly utilizes silicon carbide, providing superior wear and corrosion resistance assuring longer life. Hydraulic efficiency has been raised to a level unmatched in pumps of this size. Precision ...

Pressure: 0.3 bar - 10 bar

... injection and coal mine water injection, well washing, and can be used as hydraulic piston pump, surface pump, thermal recovery boiler feed pump, microbial solution pump ...

Flow: 500 m³/h - 25,000 m³/h
Head: 15 m - 180 m
Power: 200 kW - 12,000 kW

Horizontal single-stage pump with a double-entry wheel with the ability to be installed in a vertical position for water, aqueous solutions, produced water, thermal power stations, nuclear power stations, general industry.

Flow: 17 m³/h
Head: 22 m
Power: 1,600, 2,200 W

... energy-efficient, explosion-proof sewage pump made of cast iron for portable and stationary (coupling system) purposes robust, adjustable cutting system made of corrosion-resistant ...

Weight: 13.2, 14.2 kg

Heavy duty siphon & air hand-held pump Hand-held siphon pump Direct transfer pump Suitable for petrol, oil, diesel, water etc. Also acts as an air pump for ...

The slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical and petroleum industries ...

Flow: 0 l/min - 24 l/min
Pressure: 0 bar - 2,000 bar

... improve the primary fluid quality or to enhance the flow of primary fluid. The main -material is glass and 316s to meet the corrosion-proof requirements. Features > Low-pressure compressed air as ...

... submerged pump is a vertical centrifugal slurry pump, suitable for conveying abrasive or corrosive material. The pump is generally immersed in a pool or pit to work. XY)SPR flow passage ...

Flow: 20 l/min - 250 l/min
Head: 5.7 m - 12.2 m
Fluid temperature: 0 °C - 40 °C

Drainage pumps made of corrosion-resistant material for emptying cesspits, cisterns and for gardening. The single-phase version with built-in capacitor and thermal protector can be equipped with a float switch.

Flow: 0 us gal/min - 90 us gal/min
Head: 0'00" ft - 15'00"
Power: 0.03, 0.02 ch

... -Series Condensate Pumps from Liberty are designed to handle removal of condensate from high efficiency furnaces, A/C equipment, dehumidifiers, ice machines and other applications producing condensate. Features include ...