- Hydraulics - Pneumatics >
- Filter and Separator >
- Separator >
- Guidetti
Guidetti separators
The tension bolts are screwed into the threaded holes in the bearing separators The tension bolts are screwed into the threaded holes of the cutting blades
Flow: 70 l/min
• compact • direct drive • pressureless discharge The NZ-50 centrifugal separator is suitable for tasks involving low volume flows and solid quantities. Sludge is drained manually. The compact design allows easy ...
Separatoren-Technik & Anlagenbau
Flow: 120 l/min
Filtration size: 3 µm
... the high-performance 4 kW drive, and thanks to the special inlet hub the separator U-15 achieves a very good separation level of down to 3 µm. The cleaned medium leaves the separator under pressure (5 ...
Separatoren-Technik & Anlagenbau
Flow: 160 l/min
Filtration size: 1 µm
... silicon sand filled double casing peeler tube, backflow head 5 m flow rate up to 150 l/min With this model, optimum filter fineness can be achieved – depending on the flow rate, up to 1 µm. Solids are drained ...
Separatoren-Technik & Anlagenbau
Flow: 1,000 m³/h
Length: 95 cm
Width: 83 cm
The all-round separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: ...
Starvac
Flow: 2,000 m³/h
Length: 95 cm
Width: 105 cm
Large separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: 350 mBar Total ...
Starvac
Flow: 3,000 m³/h
Length: 95 cm
Width: 105 cm
XL separator for industrial use. Made of steel and powder coated in anthracite. Automatic Jet Pulse filter cleaning and Big Bag application available. Technical Data Max. allowed vacuum: 350 mBar Total ...
Starvac
Flow: 2 m³/min - 96 m³/min
Length: 65 in - 295 in
Width: 41 in - 260 in
The Elbow Jet Air Classifier is the world’s first air classifier capable of performing simultaneous, multiple classifications of fine, dry powders. The Elbow Jet Air Classifier contains ...
Flow: 800 m³/h - 45,000 m³/h
Filtration size: 2 µm - 250 µm
ACX classifiers belong to the main group of products offered by Comex. They have been available on the market since 1993. The number of ACX application has been carried out mostly in mineral industry. Many applications ...
Flow: 800 m³/h - 62,000 m³/h
Filtration size: 2 µm - 300 µm
UCX classifiers represent a group of products for ultra fine applications. This classifier series was newly developed for demanding applications where fine particles are to be produced with still high ...
RAOUL LENOIR
RAOUL LENOIR
RAOUL LENOIR
* It is scientifically designed and reasonably configured following customized schemes on customers’ field ,output,material types and so on.It is high in automation; * Monitored by computer,PLC control,safe,high-efficient,conservation ...
Disc stack centrifuges for degumming and pre-treatment of feedstock for HVO, SAF, Renewable Diesel production
SERVIZI INDUSTRIALI SRL
Flow: 0 m³/h - 50 m³/h
Filtration size: 1 µm - 500 µm
• Macfuge separator liquid / liquid / solid separator or liquid /solid clarifier • self-cleaning machine • centripetal pumps for the extraction ofthe separated phases integrated in thecentrifuge construction • ...
SERVIZI INDUSTRIALI SRL
Flow: 40 m³/h
Filtration size: 1 µm - 500 µm
Macfuge separator liquid / liquid / solid or liquid / solid clarifier Self cleaning machine Centripetal pumps for the extraction of the separated phases integrated in the centrifuge Gear drive Control of the motor by ...
SERVIZI INDUSTRIALI SRL
Width: 1,050 mm - 2,250 mm
The Eddy Current Separator (R-SPM) is able to separate the Non-Ferrous metals from the rest of the materials due to its studied magnetic assembly called the “Inductor Drum”, which rotates at high speed. When a Non-Ferrous ...
Regulator Cetrisa
Width: 500 mm - 1,800 mm
Non-Ferrous Metals Eddy current Separator Eccentric (R-SPM-E) is able to separate the non-ferrous metals from other materials thanks to its studied magnetic drum set called inductor, which rotates at high speed. When ...
Regulator Cetrisa
Width: 1,050 mm - 1,950 mm
... and briks1 that are previously separated from the general flow of the Municipal Solid Waste by means of an Eddy Current Separator. The cans undergo the most influence and are thrown ahead, where they are distinctly separated ...
Regulator Cetrisa
- magnetic drum for heavy working conditions - can work in water! - Automatic and efficient separation of unwanted ferromagnetic contaminants from raw materials or enrichment of ferromagnetic materials. - The stainless steel casing ...
MDR d.o.o.
- Removes extremely small, fine ferromagnetic particles from powders or granulates. - Installation in vertical pipes or in places where the material is in free fall. - Possibility of adjusting the capacity to the type of raw material ...
MDR d.o.o.
... through central part of the magnetic separator. Metal impurities, caught in the middle part of the separator, are eliminated automatically at given intervals. They are eliminated in the left or right ...
MDR d.o.o.
Especially for assembly processes, the separation of bulk material is necessary and ensures a streamlined and economical production process. We will design and manufacture the optimal separation solution for you, completely according ...
The dirt separator strips your wash water from small debris such as product particles and sand. Thereafter, the water can be re-used.
Length: 2,700 mm
Width: 1,600 mm
The pod separator is used to isolate pods and dirt from the peas. The machine is equipped with two sieve trays. The trays are fixed to the frame of the vibrating duct with quick releases. These quick releases allow the ...
Flow: 2,500 l/min
Width: 149 mm
2.5 m connection cable ready to install Simple installation using attachment set Compact design Automatic drainage of generated condensate reduces repair and maintenance work Permanent drainage of aggressive condensate ...
Schneider Druckluft GmbH
GEA Nu-Con Cyclone separators are an economical and efficient device for the removal of solid particles from airstreams. High efficiency low pressure drop designs Sanitary stainless steel construction No ...
Flow: 70, 100, 130, 170, 200 m³/h
Length: 7,750 mm
Width: 2,392, 3,246, 4,100, 4,954 mm
Size, density and shape: the ballistic separator is an essential equipment in the treatment line, specifically designed to separate the input solid waste depending on these three features Widely known for their reliability ...
Flow: 160 m³/h
Width: 1,600 mm
Weight: 15, 11.5 t
... non-ferrous metal separator to the Komptech line. Designed for conveyor feed, the Metalfex has its own intake conveyor and an overhead ferrous separator upstream of non-ferrous separation. It removes ...
Flow: 100 m³/h
Width: 1,200 mm
Weight: 9 t
The stone separator Stonefex removes stones and inert items reliably and very effectively from biomass fuels. A patented system of pressure and suction blowers generates exactly the right air flow in the expansion chamber ...
Width: 800 mm - 3,400 mm
Electromagnetic drum separators are available in both disc and transverse pole versions. In the STEINERT MTE Q transverse pole version there are several magnetic poles aligned parallel to the axis. The first pole generates ...
Length: 200 cm
Width: 60 cm - 130 cm
... distances are required. Our STEINERT UMP offering therefore extends from small, compact magnetic separators for semi-mobile use up to large magnetic separators, which can be equipped with permanent magnets ...
Flow: 56 us gal/min - 17,000 us gal/min
The Bell & Gossett Rolairtrol® is a patented centrifugal style air separator for use in any HVAC system. Its 3-to-1 body diameter to nozzle diameter ratio slows the fluid velocity to help entrained air come out of ...
Protect your scrap removal and processing system from metal solids. The tramp metal separator is primarily used with a PRAB Chip Processing system for removing bar-ends, broken tooling and other solids from the chip ...
PRAB
Cut new coolant purchases up to 75% with the PRAB tramp oil separator system. Extend the life of soluble oils, coolants and washwater. The PRAB tramp oil separator system removes free-floating and ...
PRAB
Flow: 5 us gal/min - 315 us gal/min
... Compliance The magnetic separator is a highly efficient fluid filtration method that removes high levels of ferrous contaminants from liquid, helping with recycle and reuse goals. Low Maintenance The magnetic separator ...
PRAB
Length: 100 mm - 500 mm
Weight: 385 g - 3,155 g
... impervious to liquids, filter magnets are deployed singly or in grid arrangements depending on the cross-section of the supply line. Depending on their structure or function, they are also known as filter ...
The cluster cutter is used to de-cluster mechanically harvested green beans. The cluster cutter consists of a large drum which consists of plastic segments mounted in rings, between which eccentric steel plates are mounted in such ...
Flow: 108 m³/h - 6,000 m³/h
Our CSW sériés oil-water-separators are a compact unit separating oil from water - ail this without any additional energy requirement. This separator efficiently adhères to the threshold set by the fédéral ...
Flow: 120 m³/h - 3,600 m³/h
Our CSJ sériés oil-water-separators achieve impressive residual oil values of less than 10 ppm. This means they separate water and oil even more efficiently than the threshold required by § 7 of the fédéral water act ...
Flow: 150 l/h - 250 l/h
The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...
Flow: 100 l/h - 400 l/h
The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...
Flow: 300 l/h - 800 l/h
The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...
Electromagnetic separator drums to separate ferromagnetic material from a conveying stream. These magnets are used in the areas of recycling of waste and recovery of metals. The drums can be used in many ways and are ...
Suspended belt separator for the separation of ferromagnetic material, without interruption of the conveying process. These magnets are used in the areas of recycling of waste and recovery of metals. A belt running ...
Bucket shovel with integrated magnet. The magnet is used to clean ferromagnetic materials on building sites. The shovel can be used conventionally. Size, shapes and accessories are manufactured according to customer requirements. Available ...
Length: 380, 450 mm
Width: 370, 1,070 mm
Velati spreading machine, entirely made of stainless steel, is a machinery speci cally used in the salami production, designed to pre-mix and separate the components of each type of meat already minced. Thanks to the subdivision and ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining