- Hydraulics - Pneumatics >
- Valve >
- Flap valve >
- HAWE
HAWE flap valves
Pressure: -100,000 Pa - 700,000 Pa
Temperature: 0 °C - 60 °C
Minimize the pressure drop of other circuit when a workpiece falls down. Fall prevention valve prevents the properly picked up work-piece from falling, even when several vacuum pads are without work-piece, causing ...
NIHON PISCO CO., Ltd.
Pressure: 0.1 bar - 0.9 bar
Temperature: 0 °C - 60 °C
The joint made of a flame-retarded resin is highly resistant to spatters (UL94 V-0 equivalent). The cover prevents malfunction of the release ring due to spatter. Flame-retarded plug is newly introduced. For price options, please ...
NIHON PISCO CO., Ltd.
DN: 10, 12, 6, 8, 4 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Check Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. Usable in vacuum retention state and low-pressure piping. Low-cost ...
NIHON PISCO CO., Ltd.
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
A screw-in,Cartridge-style,hydraulic check valve for blocking or load-holding device. Operation CV08-P0 allows flow from ① to ②, and blocks flow in the opposite direction. The cartridge has a fully guided poppet ...
Hydrabase
DN: 2.5, 2, 1.5 in
Temperature: -20 °C - 60 °C
... Model 62 Angle check valve is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits its flow only towards dispenser. This valve is installed on the manhole lid of the ...
DN: 2 in
Temperature: -20 °C - 60 °C
The STAINLESS STEEL ANGLE CHECK VALVE RIDART is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits the product flowing only towards a dispenser. The valve is normally ...
DN: 6 mm - 8 mm
Pressure: 0 bar - 1,000 bar
Temperature: -50 °C - 85 °C
... refuelling stations. It is compatible with the HyValve range of valves, allowing you to benefit from the synergy effects of a single source. P or peace of mind, our hydrogen valves have been designed ...
DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.5, 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 4, 12, 6, 8, 10 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 50 mm - 1,200 mm
Pressure: 16 bar - 420 bar
Axial Flow Check Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.)alloy steel end connection: RF, BW, RTJ product overview: Athena Axial flow check valve ...
Athena Engineering S.r.l.
DN: 50 mm - 1,900 mm
Pressure: 16 bar - 420 bar
... smaller installation space, lower weight and easier installation, dual plate check valves are widely used in the flow control industry. Athena dual plate check valves are in compliance with API 594.
Athena Engineering S.r.l.
DN: 50 mm - 600 mm
Pressure: 100 bar - 420 bar
... Pressure seal Swing type check valve is generally used in high temperature, high pressure and medium flow rate and pressure is stable in the large diameter pipeline system. The valve depends on the flow ...
Athena Engineering S.r.l.
DN: 13 mm
Pressure: 40 bar
Temperature: 450 °C
... infiltration at the ladle purging plug a check valve could be installed in the supply piping. The check valve maintains the immediate pressure at the plug in case the supply line discharges. The check ...
DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C
Model HCV, UL Listed Swing Check Valve, also known as NON-Return Valve, is commonly used in water pumping in Fire Systems. The main function the Swing Check Valve is to prevent back ...
DN: 2 in - 12 in
Pressure: 350 psi
Temperature: 0 °C - 80 °C
Model HCV-350GG, theUL Listed Groove Swing Check Valve, allows and easy and faster installation, this valve is commonly used in water pumping in Fire Systems. T he main function the Swing Check Valve ...
DN: 2 in - 12 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C
Model CHF, The Silent Check Valve plays an important role on piping, especially applied on the outlet of the pump. The silent check valve applied should be carefully selected to prevent potential damage ...
DN: 0.125 in - 2 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C
Series of uni-directional valves from brass hexagonal bar, female threaded. In line mounting they allow the compressed air to flow in one direction only; therefore, they are useful in those applications where no return ...
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 150 °C
Di Nicola manufactures Swing check valves in carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content alloys for conditions of extreme corrosion from over fifty years with dimensions between ...
Di Nicola Infinam Srl
DN: 50 mm - 1,200 mm
Pressure: 10, 16 bar
Temperature: -30 °C - 200 °C
Di Nicola manufactures non return valve type swing check , Venturi , double swing , Clasar type , ball type , butterfly type in ductile iron and high nickel content alloys for extreme corrosion from over fifty years with ...
Di Nicola Infinam Srl
DN: 100 mm - 1,200 mm
Pressure: 25, 40, 10, 16 bar
Temperature: -10 °C - 150 °C
Swing check valves are used on: acqueducts heatings conditioning pumping stations industry Istallation Installation in horizontal, vertical and battered positon. Quick closure without water hammer. Low head loss.
Di Nicola Infinam Srl
Pressure: 30 psi
Temperature: 40 °C - 150 °C
CV-062 SERIES Check Valve A check valve is a type of valve that allows fluids to flow in one direction but closes automatically to prevent flow in the opposite direction (backflow). Applications ...
Pressure: 100 psi
Temperature: 40 °C - 150 °C
CV-125-Check-Valve A check valve is a type of valve that allows fluids to flow in one direction but closes automatically to prevent flow in the opposite direction (backflow). Applications ...
Pressure: 3 bar - 230 bar
Temperature: -30 °C - 80 °C
Flow rate: 14, 250 l/min
Holding Valve, double check valve up to 230 BAR, G1/4 OR Manifold type, HYDRAULIC and PNEUMATIC The valve consists of a one-piece housing and is therefore repeatedly mountable. – Screw-In ...
Inosol
Pressure: 0 bar - 320 bar
Screw-In Valve up to 320 bar Miniature-Non Return Valve as Screw-In Valve from stainless steel for thread M6. – Suitable for high pressure areas – Simple mounting hole – Space-saving ...
Inosol
Pressure: 0 bar - 300 bar
... Check Valve - Individual positioning - Simple mounting hole - Valve combinations possible - For hydraulic and pneumatic applications - Working pressure up to 300 bar - Space saving mounting - ...
Inosol
Pressure: 50 bar
Xl-3 single line oil filling valve provides accurate and fail safe oil dosage, which is not affected by viscosity, temperature or pressure. The new valve body allows a large number of new application ...
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 220 °C
The innovative springless check valve for clean applications. Maximum hygiene with no maintenance required. Tightness guaranteed in all installation positions, even vertical with downward flow. The patented YGROS ...
Ygros SRL
DN: 25 mm - 200 mm
Pressure: 16, 10, 40, 25 bar
Temperature: -40 °C - 220 °C
The innovative Wafer valve, specially designed for applications in vacuum, gas and water treatment industries. Maintenance-free. Tightness guaranteed in all installation positions, even vertical with downward flow. WAFER ...
Ygros SRL
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C
The high purity evolution of Ygros Unique hygienic design, finish and materials. This check valve is suitable for all installation positions. Ideal for fluids, steam and high viscosity products. A truly hygienic solution, ...
Ygros SRL
DN: 300 mm
Pressure: 0 Pa - 1,600,000 Pa
Temperature: -10 °C - 80 °C
ART. 170 Cast iron (GJL 250) PN 16 horizontal swing check valve brass-rubber trim. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) - Central ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C
Cast iron (GJL 250) PN 16 horizontal swing check valve brass-rubber trim lever and counterweight. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 horizontal swing check valve bronze-bronze trim lever and counterweight; high temperature. Made in Italy. Fields of application: Industrial plants - Sewage Water - Sea Water - Aggressive fluids ...
Maran e Peracini srl
DN: 10 mm - 100 mm
Pressure: 0.2 bar
... passing direction – reflux inhibitor Fluids • Neutral media free from solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to ...
DIVATEC,SL
DN: 15 mm - 50 mm
• PVC materials, PP • EPDM gaskets, FPM • Gluing connections, soldering socket, threaded, DIN or ANSI flanges Advantage Low pressure loss and reliable chewing performance even with small differential pressure Chemical resistance ...
DIVATEC,SL
DN: 15 mm - 150 mm
Pressure: 10 bar
... prescribed direction of passage – reflux inhibitor Flow media • Neutral media and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The non-return valves are used in pipelines for the storage, transport and production of liquid gases and provide protection against the unintentional backflow of gases or liquids. The check valves are ...
Goetze KG Armaturen
DN: 250 mm - 500 mm
Pressure: 0.9 bar
... non-retainable is a space-saving, one-sided cover valve ideal for set up on the interiors of pipe works and have an ISO PN 10 flange in order to be attached to the perpendicular walls (grade 1.4401 (316). These flaps ...
NORHAM SAS
DN: 200 mm - 600 mm
Pressure: 1 bar
Multi N is a pipe outlet flap valve consists of a system that can eradicate the back flow of water in case of sudden increase in its level. It works by opening its flap to flow in the ...
NORHAM SAS
DN: 200 mm - 600 mm
Pressure: 1 bar
... a diagonal cover outlet valve ideal for restricted areas, supplied with an ISO PN 10 flange in order to be attached to the perpendicular walls (grade 1.4401 (316) or a basic flange (particular screws needed). These ...
NORHAM SAS
DN: 0.375 in
Pressure: 200 bar
Flow rate: 0 l/min - 20 l/min
The PKV-06 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure is applied on the pilot port. PKV-06 is used as a static load holder.
DN: 0.5 in
Pressure: 200 bar
Application PKV-30 is used as a static load holder. Specifications The PKV-30 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure ...
Pressure: 0 psi - 400 psi
Temperature: -40 °F - 140 °F
... of the valve. Accurate control is assured as very small changes in the controlling differential pressure produce immediate corrective action of the main valve. The orifice bore is factory sized based ...
CLA-VAL Automatic Control Valves
Temperature: 0 °F - 250 °F
... Series Silent Wafer Check Valve has a spring-loaded poppet that allows the valve to close before flow reversal occurs, resulting in a silent, non-slam closure. It is a truly silent check valve. ...
CLA-VAL Automatic Control Valves
Temperature: -40 °F - 140 °F
... • Three Year Warranty The Model 352GF Hydrant Pit Valve is a piston style, Deadman operated on / off valve designed for use in aircraft refueling hydrant systems. The Model 352GF Hydrant Pit Valve ...
CLA-VAL Automatic Control Valves
Pressure: 0 bar - 350 bar
— The VSK* valves are shuttle type, cartridge version and it can be used in panels and blocks. — The valve select the higher pressure signal between “1” and “3” through ...
Duplomatic Oleodinamica
Pressure: 0 bar - 670 bar
... 10,000psi(670bar) The Alco Valves Non Return Valve is designed for higher flow and low pressure drop across the valve - having a larger through bore than most other manufacturers equivalent ...
Alco
Pressure: 0 mbar - 600 mbar
Temperature: 20 °C
Operating: the manual pressure gauge valve enables, by pushing the button, to check the existing pressure when testing the system. By releasing the button, the valve automatically closes; the manual pressure ...
... completes its product range by the full range of ball valves and non-return valves employed where fluid flows in one direction and has to be kept under pressure. Our non-return valves ...
DN: 0.75 in - 1.25 in
Pressure: 6 bar
Temperature: 130 °C
... downstream of circulating pumps in heating and hot water systems, to prevent gravity circulation. They replace the isolating valve in the feed line and remain in the pipe if a pump is removed, so that the system no ...
GESTRA AG
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining