- Hydraulics - Pneumatics >
- Valve >
- Fluid check valve >
- HAWE
HAWE fluid check valves
DN: 80 mm - 200 mm
Pressure: 10, 16 bar
Temperature: 60 °C
... Association for Gas and Water Applications), it is your reliable check valve. Perfect for all projects in which water should only flow in one direction: to the consumer. The Dueker check ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 0 l/min - 20 l/min
The PKV-06 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure is applied on the pilot port. PKV-06 is used as a static load holder.
DN: 0.5 in
Pressure: 200 bar
Application PKV-30 is used as a static load holder. Specifications The PKV-30 valve, made of stainless steel W.St.1.4301, allows unrestricted flow from V to C ports and blocks flows in the opposite direction until pressure ...
Pressure: 0 bar - 320 bar
VR*-I valves are one-way check valves cartridge type construction and can be used in blocks or panels. In rest conditions, the valve poppet, which is a cone on edge ...
Duplomatic Oleodinamica
Pressure: 0 psi - 4,500 psi
High flow, zero leak, low pressure drop check valve suitable for most fluid and gas applications. Fully guided poppet with free floating O-ring design is extremely tolerant of particulate ...
Generant
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... chemical, petrochemical, compressed air applications. The stainless steel check valve also offers a three pieces spring type. SPECIFICATIONS : • - Stamless Steel stamped check valve • ...
SFERACO
DN: 0.5 in
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... liquids, water, gaz PRESSURE PFA/PS in bar θ 80° Drilled boss 1/4, POM (polyacetal) plug CLOSING SYSTEM : double check valve POM (polyacetal) GUIDE : POM (polyacetal) / SEAL : NBR (nitrile) or ...
SOCLA
DN: 15 mm - 250 mm
Pressure: 10 bar
Temperature: -10 °C - 100 °C
housing, water distributions, protection of drinking water networks PRESSURE PFA/PS in bar θ 80° 2 drilled bosses 1/4 with POM (polyacetal) plugs GUIDING + CLOSING SYSTEM : POM or PPO (Polyphenylene oxyd) or PA SEAL : NBR or EPDM
SOCLA
DN: 0.25 in - 0.75 in
Pressure: 10 bar
Temperature: -10 °C - 80 °C
CASING : brass GUIDING + CLOSING SYSTEM : POM (polyacetal) SEAL : NBR (nitrile) or EPDM lip-ring SPRING : stainless steel
SOCLA
DN: 15 mm - 200 mm
Pressure: 40 bar
Temperature: -60 °C - 350 °C
Body material Stainless steel CF8M Check valve material Stainless steel PN (End) PN40 End Between flange Contact sealing metal/metal
TECOFI
DN: 0.5 in - 2 in
... Piece, Standard Port, Threaded One-Way Bronze Ball Valves w/Integral Check feature a cam lock smart ball check valve insert manufactured from polymer materials, NBR rubber ...
... control valves These valves are designed to regulate the cylinder piston speed Check valves Full flow in one direction flow blocked in the opposite direction Pilot-operated ...
DN: 15 mm - 300 mm
Pressure: 16, 40 bar
Temperature: -10 °C - 300 °C
Material: Brass, stainless steel Working position: Any Features •compact settlement •environment-friendly •no maintanance tests acc. to EN 12266-1 class D • face-to-face dimension according to EN 558 series 49 (DN15 - DN100)
ZETKAMA Sp. z o.o.
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
Material: Grey cast iron Working position: Any Features •closing thightness (class D acc. to EN -12266-1) •compact settlement •environment-friendly •no maintenance
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
Material: Grey cast iron, nodular cast iron, bronze, cast steel Working position: Any Features •closing tightness according to EN 12334 •compact settlement •environment-friendly •no maintenance •face-to-face dimension according ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: 400 °C
•Process line, product pipes, way out of pumps, fluid machinery. •The check disc valve close for the spring action when reduce the line pressure, getting a mild closing and avoiding ...
DN: 40 mm - 1,200 mm
Pressure: 40, 64, 10, 16, 25 bar
STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-3 CHECK VALVES EN 558 S48 (ISO 5752) (DIN 3202 F6) FACE TO FACE EN 1092-1 DRILLING FLANGES STEEL EN 1092-2 DRILLING ...
ACMO S.p.A.
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
A screw-in,Cartridge-style,hydraulic check valve for blocking or load-holding device. Operation CV08-P0 allows flow from ① to ②, and blocks flow in the opposite direction. The cartridge has ...
Hydrabase
DN: 0.75 in
Pressure: 350 bar
Temperature: -54 °C - 240 °C
A screw-in, cartridge-style shuttle valve, for use in blocking circuits where a priority of flow/direction is given to a higher pressure circuit. LS04-P0 allows flow from the higher pressure port( ① or ③ )to port ② ...
Hydrabase
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... pilot-operated hydraulic check valve, which can be applied for unidirectional blocking or load holding circuits. PC08 allows flow from ② to ③, while blocking flow from the opposite direction. When ...
Hydrabase
DN: 0.5 in
Pressure: 210 bar
Temperature: -20 °C - 90 °C
Hyva Check Valve with a max. working pressure of 210 bar, Nominal flow of 35 L/min. This Check Valve is made from aluminium and the temperature range is -20 / + 90.
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 90 °C
... resistant against aggressive water male union thread with plugged drain port with test port controllable check cartridge free from dead spots for any installation position Standards and ...
DN: 0.5 in - 12 in
API 6D Lift Check Valve Manufacturer: Lift Type Check Valves, BS 1868, API 6D, BS 5352, ISO 15761, 1/2-12 Inch, Class 150-2500 LB, BW, SW, Threaded End. Lift check ...
DN: 1,000 mm
Pressure: 50 bar
40 Inch Swing Check Valve Manufacturer: ASTM A351 CF8 Swing Type Check Valves, 40 Inch, DN1000, Class 300 LB, PN50, API 6D, Flanged, API 598 Test. Valve ...
DN: 0.5 in - 4 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 200 °C
The SRT10 all stainless steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate and other process fluid applications. They are particularly ...
... some leakage. This leakage can be avoided with the implementation of the Herzog valve, which is constructed and works on the principle of a non-return valve. These valves can be built ...
DN: 0.25 in - 3 in
Pressure: 12 bar - 40 bar
Temperature: -10 °C - 180 °C
... pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as ...
RIEGLER & Co.KG
... by the full range of ball valves and non-return valves employed where fluid flows in one direction and has to be kept under pressure. Our non-return valves and ball ...
Pressure: 350 bar
PG planetary gear units are divided into 21 basic groups depending on the different torques that are to be transmitted to the output shaft, which can vary from 0.05 to 65 kNm. In fact, the product modular construction permits the coupling ...
Pressure: 320 bar
Flow rate: 60 l/min
... description - Cetop 03 Non-return valve SMC SATURN - Specifications - Check valve with spring - Benefits - Locking function - Technical information - Minimum purity of the ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass swing check valve Novo • - Brass swing check valve, with brass seat, screwed ends • - Used for water • - BS 21 / ISO 228-1-2000 threads standard • - Max ...
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 100 °C
Brass spring check valve Novo • - Brass spring check valve, screwed ends • - Used for water • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • ...
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass foot valve Novo • - Brass foot valve, screwed ends • - Used for water, petroleum • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • - Max working ...
Viet - Tiep Joint Stock Company
DN: 3 mm - 14 mm
Pressure: 0 bar - 40 bar
Temperature: -4 °F - 356 °F
... Assembly Facilities Applications: •Pneumatic Circuits Protection •Suitable for Industrial Fluids in Harsh Environment Technologies: •Non-return valve •Check valve •Function ...
Parker Fluid System Connectors Division Europe
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
Check valves, Check valves streamlined flow type, Check valves streamlined flow type on carbon steel PN 40 - ANSI 150 (1.0619) Streamlined ...
Mival
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining