HAWE hydraulic valves

DN: 20 mm - 100 mm
Pressure: 3, 16, 21 bar
Temperature: 220 °C

... Effects Separator (SCE) and Free Float® steam trap help prevent scale, rust and condensate from entering the pressure reducing valve (PRV) or reaching the important interior parts. In particular, the cyclone separator ...

DN: 25 mm
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 300 l/min

Series VR5U08 Nominal Size Inch 1" mm 25 Maximum Flow gpm 80 lpm 300 Maximum Pressure psi 5000 bar 350 Mounting Flange

Pressure: 207 bar - 700 bar
Flow rate: 3 us gal/min - 8 us gal/min

... or used remotely with hoses Compact 4-way, 3-position valve 3,000 - 4,000 psi (207 - 275 bar) return line ground dump safety valve Controlled advance and built-in hold feature Single-acting valve ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds ...

... the majority of the features of the electro-hydraulic ARV without electronic controls. Product Details The ARV-H provides the core functionality of the industry-standard Olmsted Electro-Hydraulic ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

DN: 8, 6, 12 mm
Pressure: 0 Pa - 35,000,000 Pa
Temperature: -30 °C - 51 °C

Single conterbalance valves with regenerative function. Flow range from 1 to 160 liters / min. Max calibration pressure 350 bar. Assembly with in-line manifold or CETOP3 flanging, in steel or aluminum material.

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C

... sealing ring - Independent of variations of the inlet pressure / flow rate, the valve regulates a higher inlet pressure to a constant, lower outlet pressure - Valve controlled by its own medium - ...

DN: 50 mm - 1,500 mm
Pressure: 400 bar
Temperature: -196 °C - 450 °C

Trunnion mounted split body ball valves, double block and bleed function, for oil and gas standard and severe applications The FCT Split Body trunnion mounted ball valves have been designed for severe ...

DN: 13 mm
Pressure: 350 bar

... body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball Valve ...

DN: 30, 25, 18 mm
Pressure: 6 bar - 420 bar
Temperature: -20 °C - 90 °C

... various manifold valve plate configurations Design characteristics directional control valves available as sub plate mounted valves nominal sizes 18, 25 and 30 ...

Pressure: 0 psi - 3,500 psi

The Cross Model DCV valve is a frame mounted hydraulic depth control valve designed to control two cylinders operating on a common torque tube (rocker shaft). An actuator arm, mounted ...

DN: 63 mm - 90 mm
Pressure: 10, 8 bar

Cepex offers a complete range of valves for the irrigation world, including hydraulic valves, angle seat valves (in several versions), and air release valves.

DN: 700 mm - 3,500 mm
Pressure: 6 bar - 40 bar

... Epoxy-Polymer-Ceramic (EPC) Tried and tested technology for nominal widths between DN 700 and DN 3600, variants with weightloaded hydraulic actuator available. Drinking water certificate.

DN: 56 mm - 188 mm
Pressure: 30 psi - 200 psi
Temperature: 125 °C

... primary source of fuel is taken away. An intake air shut-off valve is a must for diesel engines which have even a possibility of encountering hydrocarbon vapors. The Intake Air Shut-off Valves from AMOT ...

DN: 101.6 mm
Pressure: 345 bar
Temperature: -40 °C - 204 °C

The EV20-S34 is a screw-in, cartridge style, hydraulic directional element. It is a spring biased blocking valve which will shift to allow full flow from port 1 to 2 only when port 3 is vented to create ...

DN: 0.375 in
Pressure: 20 bar - 207 bar

The Series 3000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves ...

... variety of hydraulic systems. Power off-braking through limited stored energy in the accumulator(s). MICO also makes a hydraulic over air relay valve. These valves output ...

DN: 0.375 in
Flow rate: 7 us gal/min

... cylinders or extended lengths of hydraulic hose. Application: For systems using large cylinders or extended lengths of hydraulic hose. Operation: Controls surges by restricting flow if it exceeds ...

The control valves with actuator are primarily used within the industrial plants to maintain operating conditions such as flow, pressure, temperature and liquid level by fully or partially opening or closing response ...

... temperature variations. According to customers‘ information, valves are factory adjusted ready for operation and very simple to readjust if so desired. The patented up levelling system combined with compensated ...

... Differenlial PressureValveisa hydraulically operated pilot-controlled. modulating valve. It is designed to maintain a constant pressure differenlial between any two pressure points ina System where the ...

The Model DGV Deluge Valve is designed for use in controlling water flow to deluge, pre-action or foam-water type fire protection sprinkler systems. This valve is UL Listed in Special Systems Water Control ...

Pressure: 46 bar
Temperature: -40 °C - 120 °C

... the oil receiver and drained out to the suction line via the differential valves. Maximum working pressure: 46 bar HCYCT: 4 models of non adjustable differential valves with set pressures of ...