HUBER liquid coolers
Water cooler designed to integrate with the Dynasty 210/300 and Maxstar 280 models.
Power: 500 W
Pressure: 0.33 MPa
GYS
Power: 1,000 W
Pressure: 0.4 MPa
GYS
Power: 1,000 W
Maximum temperature: -10 °C - 40 °C
GYS
... applications, a polyurethane system often requires extremely exact temperature control methods. Hennecke uses industrial chillers with water circulation whose types and dimensions correspond to the pre-calculated ...
... up to three hours with the Cooling Blocks by BRAND. They are designed in ANSI/SLAS format to fit robotic systems like the Liquid Handling Station. All well positions are cooled homogenously. The Cooling Blocks work as ...
Power: 765 W - 2,750 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 14.7, 11 l/min
... alternative to tap water cooling, these Recirculating Chillers reduce water consumption, while the patented WhisperCool® Environmental Control System reduces noise levels below conversational ...
Maximum temperature: -40 °C - 120 °C
... temperature damage/start/operation The battery liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to ...
Guangdong Bell Experiment Equipment Co., Ltd
Maximum temperature: -40 °C - 120 °C
... temperature operation The battery pack liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to the requirements ...
Guangdong Bell Experiment Equipment Co., Ltd
Maximum temperature: -40 °C - 85 °C
Pressure: 0 bar - 3 bar
... temperature damage/start/operation The battery liquid cooler is specially used for thermal and fluid mechanics testing of liquid cooled battery packs. According to ...
Guangdong Bell Experiment Equipment Co., Ltd
... With our cooling water recoolers you can pre-select the desired temperature. This guarantees that it remains constant, which increases the service life of your tools. Our recooling systems also represent a closed ...
... and household appliances. SISE Heat & Cool systems have single and dual circuit versions and work using water, pressurized water or oil. SISE technology meets the heavy demand for « Piano Black » finish for the l’automotive ...
Flow rate: 10 l/min - 30 l/min
Pressure: 30 bar
... directions. TECHNICAL SPECIFICATIONS OF USE: • Hot fluid inlet max. temperature: 225°C • Cold fluid inlet min. temperature: -160°C Operating fluids: -Mineral oil -Synthetic oil -Emulsified ...
Taon Hydraulik Komponenter ApS
Flow rate: 40 l/min - 120 l/min
Pressure: 30 bar
... directions. TECHNICAL SPECIFICATIONS OF USE: • Hot fluid inlet max. temperature: 225°C • Cold fluid inlet min. temperature: -160°C Operating fluids: -Mineral oil -Synthetic oil -Emulsified ...
Taon Hydraulik Komponenter ApS
Flow rate: 30 l/min - 80 l/min
Pressure: 12 bar
They consist of smooth tubes with little diameter; this allows the best compromise between high thermic performance and low pressure drops.
Taon Hydraulik Komponenter ApS
... protection, compressor protection, motor overload, overheating protection, anti-freezing protection, cold water, cooling water break water protection, temperature sensing type easy to melt plug, safety valve.
... 330mm Tank capacity: approx. 4l Water column: 35m | 5l/min. Cooling capacity: 1000W (1l/min.) Package includes: - Water cooling unit - Connection cable inverter / water cooling ...
Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. - Standalone or continuous operation possible - Temperature-regulated fan control - ...
Maximum temperature: 3 °C - 5 °C
... spots, etc. • It can be also used for dust suppression, static charge prevention, and humidification. *1) Spray capacity at a water pressure of 5.0 MPa when the number of installed nozzles is 8 pcs. The number of installable ...
... at tap water pressure of 2 kg/c㎡ (0.2 MPa). It varies by the tap water pressure. 4.8 L/hr at 3 kg/c㎡ (0.3 MPa) tap water pressure, 5.1 L/hr at 3.5 kg/c㎡ (0.35 MPa) tap water ...
Maximum temperature: 3 °C - 5 °C
... capacity for each nozzle at tap water pressure of 3 kg/c㎡ (0.3 MPa) when 6–7 nozzles are installed. Spray capacity varies depending on tap water pressure and the number of nozzles. Spray capacity for ...
Efficient and hygienically flawless cooling water systems Properly functioning cooling systems are important for trouble-free industrial production. Consequently, cooling water treatment ...
Automatic flexible bags cooling system Fresh Cooler • Increase quality juice • Fast and efficient BIB & Pouch cooling system • Low consumable equipment • Taylor according pasteurization ...
Cooling Units Answering to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is ...
Power: 25.7, 9.45, 19, 5.81 kW
Maximum temperature: -15, -10 °C
Flow rate: 48 l/min - 181 l/min
Chiller can be used in the Complete Egg Processing Line. For the needs of the pasteurizers, every chiller must come with OPZL option (for cooling up to -15℃) How it works: In the cooling section, ...
Power: 1.8 kW - 6.5 kW
Maximum temperature: -20 °C - 55 °C
Flow rate: 400 l/h - 1,500 l/h
... site where utilities supplying cooling water is of a lower quality or special requirements of cooling water are needed, BARTEC BENKE closed loop chillers can be supplied to meet these ...
The Cabinplant water chiller is of the Baudelot (falling film) type. Water flows uniformly from a common overhead distribution trough over both sides of the vertical stainless steel plates. ...
Power: 4.7, 7.6 kW
Maximum temperature: -15 °C - 45 °C
Flow rate: 3,900 m³/h
for cooling the KHS CoolFlow cold water cooler air-cooled chiller in compact design for outdoor installation for energy-efficient operation of the KHS CoolFlow cold water circulation ...
It is used for cooling hydraulic fluid, improving working condition, extending working hours and operating life.
Power: 5 kW - 180 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 3.6 m³/h - 33 m³/h
... computer, accurate temperature control. •Pump overload protection to ensure service life effectively. • Alarm device for low liquid level to guarantee system running safety. Switch of main power source conforms to CE ...
Power: 15 kW - 360 kW
Maximum temperature: 7 °C - 35 °C
Flow rate: 5.4 m³/h - 90 m³/h
CE Certificated Description Benefits & Features •The device can cool the water temperature ranging from 7 to 35oC. •The low cooling temperature can be customized as per customer’s needs. •The micro computer ...
Power: 70 W - 1,100 W
Flow rate: 550 m³/h - 8,000 m³/h
... used to prevent excessive increase in the fluid temperature of hydraulic systems and to ensure that the properties of the fluid and components used in the system work without deterioration. While the ...
1.The Industrial Chiller is mainly used to provide cooling water for high-end industrial equipment, at the same time, also widely used in mechanical processing and manufacturing,plastics and rubber,electrical ...
Maximum temperature: 0 °C - 450 °C
Pressure: 0 bar - 110 bar
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis. Sample coolers prevent steam flashing-off from hot pressurized liquid ...
Power: 800 W
... and without disrupting the ventilation of the servers. The heated air coming from the servers is cooled by a coil of iced water housed in the rear door. Fans compensate for the load losses due to the coil. Optimised ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining