HUBER straight connectors

Primary current: 0.5 A
Voltage: 5 V
Pitch: 1.2, 1 mm

ATTEND's 101M Series CF Express Sockets combines the compact form factor of XQD cards with a high-speed PCIe® interface and it utilizes the NVMe protocol to ensure efficient communication between the card and the host device. The 101M ...

Primary current: 0.6 A
Voltage: 25 V
Operating temperature: -40 °C - 85 °C

ATTEND's126A/B Series DDR5 SODIMM socket is a high-performance solution that meets JEDEC standards for high-speed electrical requirements. With an LCP housing for robust mechanical strength, stability, and chemical/heat resistance, these ...

Primary current: 0.5 A
Voltage: 25 V
Operating temperature: -40 °C - 85 °C

Since SO-DIMM roughly half the size of regular DIMMs, it often used in systems with limited space, such as laptops, notebooks, small-footprint personal computers, high-end upgradable office printers, and networking hardware...etc. ATTEND ...

Primary current: 14 A
Voltage: 830 V

Primary current: 3.6, 10, 14, 20 A
Voltage: 63, 630 V

• PC board jack M12 • 8-pole, X-coded according to IEC 61076-2-109 • 10 GBit suitable according to IEEE 802.3an • THR solderable • Top entry • Contact carriers green • IP67 when plugged in

• PC board jack M12 • 4-pole, D-coded according to IEC 61076-02-101 • THR solderable • Front mounting • Contact carriers green • IP67 when plugged in

Primary current: 1 A
Voltage: 50 V
Operating temperature: -40 °C - 85 °C

• RJ45 plug to be assembled in the field for 25 Gbit up to 1250 MHz • fully shielded and multi-port capable • straight (180°) cable feed • easy assembly - connection without special tools • wire connection: stranded ...

2-4 core wire connector waterproof grade IP68 rear connection wire screw connection ventilation cable extension waterproof connector

Standard Name: explosion-proof armored joint or armored cbtl. Thread size: MG metric screw tooth, German PG teeth, G inch (PF) control thread, NPT made conical thread. Product Description: this section of stainless steel armoured ...

Connectors for Wiring Photovoltaic Panels General features ✔ Contact material: silvered copper ✔ Box material: Polycarbonate / Polyamide ✔ Contact diameter: 4 mm ✔ Acceptable wire sizes: 4 to 6 mm² ✔ Cable insulation ...

Twist connectors for Cu-wires 10 - 35 mm² „ material copper „ for single strand and multi-strand wire, see note „ the connector is twisted in the opposite direction to the direction of lay of the wire ...

Overhead connectors for alloy AlMgSi (Super B) and Al59 conductors 31 - 241 mm² „ material aluminium alloy „ for jointing overhead conductors AlMgSi (Super B) and Al59 „ tested according to the requirements of the ...

... Overmoulded metric circular connectors acc. DIN EN 61076-2 or customized connector layout satisfying the requirements of the application: Polar pattern and pin assignment -overmoulded with different ...

Primary current: 4 A
Voltage: 10 V - 30 V

Straight in d.c. • Moulded with cable • According to EN 60947-5-2 • General Features: Female connectors of this section can be matched to the proximity sensors as indicated on the ordering references ...

Primary current: 4 A
Voltage: 0 V - 75 V

Straight in d.c. • Moulded with cable • According to EN 60947-5-2 • Technical data: • Operating voltage: max 50 Vac/75 Vdc • Maximum current: 4 A • Contact resistance: ≤ 5 mΩ • Contacts: CuZn, brass pre-nickeled ...

Primary current: 4 A
Voltage: 0 V - 75 V

• STRAIGHT in d.c. • Moulded with cable • According to EN 60947-5-2 General Features: Female connectors of this section can be matched to the proximity sensors as indicated on the ordering references ...

Primary current: 1 A
Voltage: 60 V

The most compact connector type in the M-Series range, our waterproof M5 sensor connectors come in straight and angled forms with PVC or PUR overmolded cable connector ...

Primary current: 10, 16 A
Voltage: 250, 400 V

Rely on the original – Market leading for decades Conforming to IEC 60335, the latest standards for household appliances, the Hirschmann ST Series sets the standard in building automation applications. This makes it an ideal first choice ...

Impedance: 50 Ohm
Voltage: 500 V
Operating temperature: -40 °C - 85 °C

... polarity, with 50ohm impedance; • Body can be straight or right angle; • Mount Method can be bulkhead or mount-less; • Attachment methods include clamp/solder or solder/solder. The 2.2-5 RF connectors ...

... polarity, with 50ohm impedance; • Body can be straight or right angle; • Mount Method can be bulkhead or mount-less; • Attachment methods include clamp/solder or solder/solder. The 2.2-5 RF connectors ...

Impedance: 75 Ohm
Operating temperature: -65 °C - 165 °C

... is brass or stainless steel. The N type connector are designed to satisfy the need for a durable, weatherproof, medium-size RF connector, frequency max up to 1GHz; this Type N female Coaxial connector ...

Primary current: 2 A
Voltage: 800 V
Operating temperature: -25 °C - 85 °C

Mating: Packing:Bag Delivery time:7~15 Day UL: Yes ROHS Compliant Contact resistance: 20mΩ Max Insulation resistance: 1000mΩ Min Contact material: Brass Contact plating: Au or Sn over Ni Insulator material: PA6T

Primary current: 1 A
Voltage: 100 V
Operating temperature: -25 °C - 85 °C

Mating: Packing:Bag Delivery time:7~15 Day UL: Yes ROHS Compliant Contact resistance: 20mΩ Max Insulation resistance: 100mΩ Min Contact material: Brass Contact plating: Au or Sn over Ni Insulator material: PA6T

Primary current: 0.5 A
Voltage: 50, 500 V
Operating temperature: -25 °C - 85 °C

Mating: Packing:Reel Delivery time:7~15 Day UL:Yes ROHS Compliant Contact resistance: 20mΩ Max Insulation resistance: 800mΩ Min Contact material: Phosphor bronze Contact plating: Tin plating over Ni Insulator material: LCP

... Automobil) series with its High Speed Data FAKRA connectors. One pin FAKRA connectors are no longer adequate for applications that require higher data transmission rates. HSD FAKRA four pin connectors ...

... line of Push Pull Connectors consists of metal and plastic connectors, bend reliefs, and elbow sockets. Each product type is offered in a variety of options, including positions, mounting, and size. Specialty ...

Pitch: 0.8, 1.25 mm

... multiple pitch Headers and Housings are a matched set of Crimp Wire Housings and PCB mounted Shrouded Headers available in Straight, Right Angle or SMT orientation. Available pitches are .031”, .039”, .047”, .049”, .059”, ...

Primary current: 5 A
Voltage: 125, 500 V
Operating temperature: 230 °C

DSUB, D-SUB Straight, Elevated / Through Hole Mount, Solder Cup, Press-Fit Solder-in version Pincount - 9, 15, 25, 37 Gender - Female, Male Material contact - Copper alloy Plating contact - Au, Selective Au Material ...

Impedance: 50 Ohm
Voltage: 500 kV

... coax connector. With its bayonet coupling mechanism this connector can be used up to 4 GHz. Both 50 and 75 Ω impedances are available. Connector styles are available for flexible, conformable ...

Impedance: 75 Ohm
Voltage: 500 kV

... Ohm connector series comprises miniature connectors with bayonet coupling. These connectors are less than 50% of the size of standard BNC connectors, and so have a packing ...

Impedance: 50 Ohm - 75 Ohm
Voltage: 500 kV

... commonly used coax connector. The same size as BNC connectors, but with a threaded coupling mechanism, this connector can be used up to 11 GHz. Both 50 Ω and 75 Ω impedances are available. ...

Impedance: 10 Ohm
Primary current: 2 A - 10 A
Voltage: 0.6 kV - 1.2 kV

... Insulator , Contact Diameter , Contact Plating , Cable Collet , Coding 0∘, Number of Contacts 8 Pin, Logo "nextron" logo Style Straight plug, solder contact, Outershell Material Black PSU, Nut Color Black, Insulator ...

Operating temperature: -20 °C - 150 °C

... outershell • Durability: >2,000 cycles Style Straight plug with fluidic contact, Outershell Material Grey PSU, Nut Color Black, Cable Collet Ø6.5mm (CableØ=5.3~6.5), Coding 0∘, Logo "nextron" logo Style Straight ...

Primary current: 1.5 A - 30 A
Voltage: 0.6 kV - 2.4 kV
Operating temperature: -55 °C - 250 °C

... Style Straight plug, Number of Contact 2pin (for size 0), Outershell Material Brass, Contact Type Male solder contact (for Style S), Collet Type D type, Collet Nut Standard, Cable O.D. CableØ 1.3 to 2.2 (For size 0) Series ...