Ifm digital I/O modules
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
... connectors, max. 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red Digital input module DI24 MODBUS (RS485) Operating mode: Slave 24 channels digital ...
The RTD-P high-precision measuring module has been developed for applications which place extremely high demands on resolution and measuring accuracy. The RTD-P modules have an extremely accurate analogue-to-digital ...
HiTec Zang GmbH
... 300 mA/module). • Frequency measurement • Edge detection • Counting input • Period length measurement • Pulse duration measurement • Inputs with connectible NAMUR-compliant level detection system • Status LED ...
HiTec Zang GmbH
... (e.g. a solenoid or reflux separator). • 4 active digital outputs • For direct connection of proportional solenoids • LED control display • Short-circuit-proof • Signal : 4 ...
HiTec Zang GmbH
... using Modbus TCP/IP and MQTT. It has a range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic ...
The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via ...
METZ CONNECT
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window ...
METZ CONNECT
The Modbus module in an IP65 housing with 4 digital inputs and 2 relay outputs was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window ...
METZ CONNECT
ASi Digital I/O Module in IP20, 22,5 mm x 50 mm, with 4 x 4 contacts, 4 digital inputs, 4 digital outputs, input voltage/sensor supply out of ASi, output ...
Bihl+Wiedemann GmbH
• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power ...
... is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process ...
... other devices. PD 802 is used with the BM 103 base module that provides the power supply connection and connection for all the communication interfaces. The device can be fixed to the base module ...
PROCES-DATA A/S
... 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic ...
LEROY AUTOMATION
The digital I/O-Module MK210 has 6 or 12 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 8 or 4 digital outputs (relay) available. ...
The digital I/O-Module MK210 has 6 or 12 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 8 or 4 digital outputs (relay) available. ...
The digital output I/O-Module MU110-24.8D.4R has 8 digital inputs which are implemented as switch contacts and NPN. In addition, there are also 4 digital outputs (relay) ...
The ELPRO 115E-2 Ethernet Networking I/O and Gateway is a multiple I/O node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. Designed to work with ...
ELPRO Technologies
... xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of ...
... the same time, the module offers 14 digital outputs, most of which can be configured as PWM or PWM(i). The maximum output current of 7 A is sufficient to control even actuators with high power. Fully ...
... xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. Two of the ...
The QE-8DI is a slave module with n°8 digital inputs. Thanks to the presence of the RS485 serial port it can perform advanced functions such as I/O module with Modbus ...
qeed
The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks ...
SERAD
... acquisition modules, which are also called distributed IO modules, IO modules, data acquisition cards, data loggers, and IO cards. FEATURES ...
BRAINCHILD ELECTRONIC CO., LTD
... Central, using local I/O bus of CPU module. Up to ten I/O modules can be connected to the CPU. Decentralized periphery via fieldbus between CPU module ...
ABB Automation Products GmbH
... and Serial. The parallel modules (I-8K Series) are high-speed modules and support MCU (Main Control Unit) only. The serial modules (I-87K Series) can support either MCU or I/O ...
8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated ...
Brainboxes
... RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is available with a ...
DATEXEL SRL
This module is an external board assembled on a DIN rail with: 8 digital contact relay outputs, with several functions like: level indication or alarms (setpoints), barriers and traffic lights control ...
... functions on the digital input / ouput MAQ20-DIOH module can run simultaneously. High, Low, High-High and Low-Low alarms provide essential monitoring and warning functions to ensure optimum process flow ...
... user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the channels on this digital input / output module ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O ...
... interrupt inputs Galvanic isolation from system Status display for each channel via LED The digital input / output modules DIO216/x and DIO232 can be used ...
BACHMANN
The ANTARES 4AIO Remote I/O Module is operated and supplied with power by means of the Rail Control Unit (RCU) ANTARES. This module allows the direct linking of 4 intrinsically safe transmitters ...
BARTEC
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining