JAKSA high-pressure solenoid valves

DN: 0.25 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 130 °C

3-port valve body - High Pressure Service INOX valve bodies, other voltages and sealing materials available. Please note that maximum differential pressure ...

DN: 0.5 in
Voltage: 230, 24 V
Temperature: -10 °C - 100 °C

Seals: PA, PTFE Viscosity: max 21 mm2/s Response times: opening 0.1 - 1 s; closing 0.5 - 5 s Duty cycle: continuous (ED100%) Cycling rate: 10 - 100 cycles/min Electrical protection: IP65 (with plug to ISO 4400) Long term use in ...

DN: 0.25 in
Pressure: 0 bar - 400 bar

Valve is controlled by compressed air acting on piston in the cylinder. Valve is kept open by the spring force. When pilot pressure is applied the valve ...

DN: 2 mm
Voltage: 24 V
Temperature: -10 °C - 75 °C

2/2 TOTAL ISOLATION SOLENOID VALVES High pressure FEATURES: Pilot completely dry Wetted parts AISI 316L Operating pressure 15 bar max Higher ...

DN: 0.25 in
Voltage: 24 V
Temperature: -10 °C - 100 °C

Valve body AISI 316Ti, solenoid shaft AISI 316L High Pressure Cone & Thread or face seal fittings can be used Excellent sealing also at low pressure ...

DN: 0.25 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 100 °C

Body: Brass or INOX (AISI 303) Internal parts: INOX (AISI 303, AISI 430F) Seals: PA (polyamide), PTFE, PU (polyurethane), PEEK Ambient temperature: max +55°C Viscosity: max 21 mm2/s Response time: opening 0.1 ...

DN: 0.25 in
Voltage: 24 V
Temperature: -10 °C - 100 °C

JAKSA D2N, XD2N and D22NO series 2/2 high-pressure solenoid valves have a robust, 1.4305 steel, sealing pin design, featuring excellent sealing (PCTFE) at low pressures ...

DN: 0.125 in
Voltage: 24, 230 V
Temperature: -10 °C - 100 °C

The XD21, and the XD21N, which are manufactured by Jaksa, are small, high pressure solenoid valves that are integrated with G1/8 ports and PTFE seals. The units have ...

DN: 0.25 in
Voltage: 24 V
Temperature: -10 °C - 100 °C

... pull / 4 W hold PEEK is a non-elastic sealing material, a slight leakage on valve seat can be expected at low fluid pressure. OPTIONS: Other supply voltages SAE 6 ported valve body Suitable ...

DN: 0.375 in
Voltage: 24 V
Pressure: 1 bar - 70 bar

Single valve designed for high-pressure humidification and adiabatic cooling applications. Separate drain port for convenient pressure relief and nozzle drip prevention. Valve ...