Kennametal chucks

Clamping range: 18 mm - 140 mm

Clamping range: 12 mm - 130 mm

Rotational speed: 1,200 rad.min-1 - 10,000 rad.min-1

A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...

Rotational speed: 5,000, 10,000, 6,000 rpm

A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...

Compact tool holder which length under the gage line is 23.5mm (including bush flange thickness 1.5mm). Optimal when available space is limited. A compact tool holder ideal for use when available space for tooling is limited inside the ...

HSK-E For high speed cutting (HSC) For automatic tool change Without any drive keys for absolute symmetry

T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with 10 mm diameter Q+ Balancing, ...

TC (SK) Toolholders Specifications T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID ...

Clamping range: 20 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 25, 32, 20 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 20, 25, 32, 42 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 0.3 mm - 34 mm

16 degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only those that meet the standards THREE TIMES are ...

Alps Tool’s NICE MILL is a product that provides total support for machine tool tooling by making collet holders, AR collets, nuts, and other tooling compatible. This series offers a wide variety of collet holders, AR collets, nuts, ...

Adjustable cutting edge for Y axis positioning. It can be use for coolant through Alignnable chuck center line and drill center line.

Clamping range: 80 mm - 400 mm

Precision spiral ring chuck made of steel with cylindrical centering according to DIN 6350. The chuck enables uniform clamping force by centric clamping jaws as well as high runout accuracy. Three-jaw ...

Clamping range: 115 mm - 210 mm

Pneumatic or hydraulic three-jaw chucks for individual mounting on the machine table or for workpiece automation. Advantages at a glance Design: Stainless cylinders, dust and splashproof Material: steel Finish: ...

Clamping range: 80 mm - 162 mm

Mechanical manual chucks with high precision, holding force and rigidity for use on machining centers, prototyping and metrology. The version SK -2 provides, due to the optimized force transmission in both axial directions, ...

Power Collet Chuck is an advanced and economic clamping device for holding the parts during the machining operation. Power Collect Chucks are usually the best substitution for normal lathe chucks ...

Super-precision hydraulic expanding mandrels are a very precise and suitable alternative for grippers and fixtures available on the market and/or designed for specific purposes. One of the problems in material removal, in highly precise ...

... and easy usage of Straight Shank Collet Chucks created a new concept of tool clamping in the machine tools industry. Economic price, wide range of sizes and availability of the Straight Shank Collet Chucks ...

Tap adapter - the affordable entry. The tap is inserted directly into the 19 or 32 mm Weldon system using an adapter. Only suitable for through threads! Tap adapters – getting started economically! By means of the adapter, the taps ...

SELECTED TO LAST. Diversity, high quality and precision: Tool holders from 8x8 to 32x32 mm. This is where you’re assured to find the right KMH tool holders to meet your requirements: with or without through tool cooling, for almost ...

PRECISION ON THE FLY. Tool changes with speed, precision and flexibility: HSK-T tool holders from ARNO. With HSK-T, you benefit from the advantages of the HSK interface for turning applications on multi-task turn-milling centres, ...

Part-off holders and flange mounted holders Machine specific flange mounted holders for use with SA part-off modules, blades, monoblock holders, and monoblock holders SE. The modular holders can be mounted either normal or upside ...

Rotational speed: 15,000, 18,000, 30,000 rpm

Our BT series steep taper shaft holders are a classic. They are a widely popular clamping solution traditionally used for milling spindles. Easy to operate, robust, precise – covering a vast range of applications. > superb precision, ...

Rotational speed: 40,000 rpm

As a traditional steep taper interface for machine tool spindles, ISO is famous for its robust design. It is applied all the range from light to heavy machining. Centering is done via taper contact. Clamping is secured by an additional ...

Rotational speed: 40,000, 25,000, 20,000 rpm

HSK has become the standard interface in metal machining operations. Clamping is done via taper and face contact – thus higher rigidity is achieved. Centering and axial fixing as well as repetitive accuracy is unmatched. HSK holders demand ...

Clamping range: 0.5, 1 mm
Rotational speed: 7,000, 6,000, 5,500, 5,000 rpm

... reduced diameter nose for maximum tool clearance. The collet is coupled directly to the chuck body and remains fixed as the tapered seat moves forward when the chuck is actuated. The collet remains fixed ...

Clamping range: 4 mm - 25 mm
Rotational speed: 6,000, 4,000, 3,500, 3,000 rpm

... models are used for collet sizes 120mm and larger. The collet is coupled directly to the chuck body and remains fixed as the tapered seat moves forward when the chuck is actuated. Since the collet remains ...

Clamping range: 5 mm - 142 mm
Rotational speed: 5,000, 4,500, 4,000, 6,000, 5,500 rpm

In the CB-NB series collet chucks, the collet is coupled directly to the draw tube connector. When the draw tube is actuated, the collet is drawn into the tapered seat of the chuck body, efficiently translating ...

LIVE CHUCK FLANGE: 380 max. 1 µm with pressure compensation with sealing ring hardened jaws + soft top jaws chuck in cast or steal shaft MT 2 / 3 / 4 / 4S / 5 / 5S / 6 / 6S

Clamping range: 68 mm
Rotational speed: 8,000 rpm

Axial drilling and milling head with offset axes Premium class tooling system for highest production efficiency - Made in Germany With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. ...

Rotational speed: 8,000 rpm

With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...

Rotational speed: 6,000 rpm

With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...

Clamping range: 0.2 mm - 25 mm

• - Holding force up 1100 Nm • - WZ-Concentricity < 0,003 mm • - Clamping procedure <10 Sekunden • - Clamping diameter from 0,2 - 25 mm

Rotational speed: 20,000 rpm

■ Suitable for high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): < 0.003 mm.

Rotational speed: 25,000 rpm

■ For high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): £0.003 mm; ■ No interference due to slim design.

HSK-A-SF shrink-fit holder | high precision | high rigidity Features: ● Adapter standard: HSK DIN69893-1; ● Run out: ＜ 0.005 mm; ● Balanced: G2.5; ● Integrated model with outstanding accuracy, rigidity, and balance capability. Application: This ...

To offer our customers a complete range of solutions, TDM SA supplies the following: auxiliary units, ISO and HSK interface cones, tool holder cones, extensions and collets with clamping nuts. They are optimized to be used in combination ...