- Hydraulics - Pneumatics >
- Valve >
- IP65 solenoid valve >
- KUHNKE
KUHNKE IP65 solenoid valves
DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar
... Electrical connection For PG9/ PG11 connector in line with ISO 4400 Protection class IP65 When using a connector Materials Brass housing (CW617N) Valve seat made of brass ...
DN: 6.5 mm
Voltage: 24 V
Temperature: -5 °C - 180 °C
Media: - Compressed Air, Oxygen, Gas Design: - Poppet Type Port Size: - In/Out/Exhaust - Customised Materials of Construction: - Aluminium, Silicone, Viton, Brass, Polymer oil Information Operating Voltage / Power 24V DC / 6W Consumption: Coil ...
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar
The 840 Series Pneumatic Solenoid Valves is of the 2/2 NC Type. Its innovative and advanced design gives the realization of a shutter valve with a very smooth operation principle and ...
MATRIX mechatronics
Voltage: 12, 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar
The Pneumatic Solenoid 750 Series 2/2 encloses in a single body eight shutters in NC or NO configuration. The Series particularity permits to have at transfer a single outlet or 2, 4, 8 free outlets. All developments ...
MATRIX mechatronics
Voltage: 12, 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 4 bar
The 3/3 series of products present a small-sized single body with four utilities according to the different models, in various configurations. First of all, the NC outlet with the NO air drain port comes with the 'C' function code and ...
MATRIX mechatronics
DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar
General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to the gas or liquid.
gevasol
DN: 1.2 mm - 4 mm
Voltage: 12 V - 24 V
Temperature: 0 °C - 50 °C
General purpose, media separated solenoid valve for water, aggressive fluids, and gases. Especially recommended with concentrated chemicals such as fertilizer, acids, bases. Valve body ...
gevasol
DN: 0.8 mm - 4 mm
Voltage: 12 V - 24 V
Temperature: 0 °C - 50 °C
... wide versatile general purpose media separated solenoid valve for water, aggressive fluids, and gases. Especially recommended with concentrated liquid chemicals such as fertilizer, acids, bases. Valve ...
gevasol
DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C
... the pilot valve can be easily removed after loosening the union nut (8) -with the system without pressure-. The magnet is fixed with a blind nut (15). This one can rotate freely in front of the valve ...
DIVATEC,SL
DN: 2 mm - 8 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C
Direct action with PTFE • PVC, PTFE materials • FKM special seals, EPDM seat Function • Closed without current (NC) • Directly controlled
DIVATEC,SL
DN: 1 mm - 2.5 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C
• Direct action with insulating diaphragm • PVC, PTFE materials Function • Closed without current (NC) • Directly controlled
DIVATEC,SL
Voltage: 10 V - 30 V
Temperature: -20 °C - 70 °C
... proportional valves. The unit supplies a variable current proportionally to the reference signal and independently of temperature variations or load impedance, with a resolution of 1% on 2600 mA (the full scale value). The ...
Temperature: 60 °C
Pressure: 25 bar
... type The Delta type EV electrical solenoid valve is a normally closed one-way direct acting valve. It is designed for use as an interrupter valve or as a shut-off valve. ...
Voltage: 12 V - 230 V
Pressure: 0 psi - 120 psi
... Technology manufacturers the SV series solenoid valves offering a complete range of options designed according to NAMUR VDI/VDE 3845, as well as non-NAMUR style valves. For NAMUR style ...
DN: 0.125 in - 0.25 in
Voltage: 12 V - 220 V
Temperature: -20 °C - 70 °C
1. Direct-acting type and normally closed mode, flexible in direction change. 2. Normally closed and normally open types are optional. 3. Structure in coaxial blanking mode: leakage proof and large air flow. 4. No need to add ...
Airtac Automatic Industrial
DN: 0.25 in
Voltage: 24, 110, 220 V
Temperature: -10 °C - 60 °C
3/2 way solenoid valves are available as single station units and they are designed for use with compressed air, mainly applied where on/ off control is required with pneumatic actuators.
DN: 15 mm - 300 mm
Voltage: 380, 220, 110, 24 V
Temperature: -25 °C - 185 °C
• Connection Type Screw BSP/NPT/DIN/RC Flange DIN, GB, ANSI, JIS • Regulation accuracy: 5% • Explosion class: Non-explosion-proof ,Flameproof Exd II BT4
DN: 0.8 mm - 2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
... rangeFluid :-10ºC to 80ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with media Main Valve: Aluminium, Stainless Steel AISI 316, Brass Solenoid Operator Stainless Steel AISI 300 & 400 ...
BACCARA AUTOMATION
DN: 1.6 mm - 3 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 80 °C
... Temperature rangeFluid : -10ºC to 80ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass Solenoid Operator: Stainless Steel AISI 300 & 400 series Seals: NBR, FPM ...
BACCARA AUTOMATION
DN: 8 mm - 19 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 80 °C
... Temperature rangeFluid : -10ºC to 80ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass Solenoid Operator: Stainless Steel AISI 300 & 400 series Seals: NBR, EPDM MediaAir, ...
BACCARA AUTOMATION
DN: 5 mm
Voltage: 6 V
Temperature: 5 °C - 70 °C
2/2-way solenoid servo-controlled valve of DN 5 in bistable version, for the control of potable water. The valve is especially suitable for use in electronically controlled, battery driven ...
A. u. K. Müller
DN: 0.25 in
Voltage: 14 V - 24 V
Temperature: -45 °C - 80 °C
Special features • - Solenoid valve • - High level of operational reliability due to the solenoid with armature and booster valve with ball/seat • - Attachment ...
SAMSON
DN: 0.063 in
Voltage: 12 V - 240 V
Temperature: -10 °C - 50 °C
The VDW size 1 is available with resin, brass or stainless steel body with orifice size up to 1/16 inch. Resin body is offered with one touch fitting to reduce installation time. Maximum Cv is 0.07. •Normally Closed type, class B coil •Power ...
SMC Corporation of America
DN: 0.3 mm - 8 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 190 °C
... Controlled by Normally Closed G 1/4" Solenoid Valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves ...
Parker Fluid and climate Controls Europe
DN: 2.95, 3.18 mm
Voltage: 24, 5, 12 V
Temperature: 5 °C - 55 °C
... proportional valve providing high flow and high pressure configurations, at less than 2.2 watts of power. This family consists of two orifice sizes and three voltage options. The Parker VSO® MAX HP series is a miniature ...
Parker Precision fluidics Division
DN: 0.25 in - 1 in
Temperature: -10 °C - 90 °C
... seal material: NBR Seal and diaphragm material: NBR Coil power: AC 10VA (holding) AC 16VA (inrush) DC 7W Protection class: IP 65 (with connector)
M & M INTERNATIONAL
Voltage: 24, 220 V
Temperature: 0 °C - 150 °C
Pressure: 0 bar - 8 bar
DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
Functioning body material Brass CW617N Pipe Size G1/4″, G3/8″, G1/2″, G3/4″, G1″ KV From 1,5m3/h to 10,2m3/h Seal NBR, FPM, EPDM Applications Water Management Irrigation Air and Gas Management Automation and Industrial controls Industrial ...
R2G Fluidics Srl
Voltage: 230, 24 V
Temperature: -15 °C - 50 °C
Pressure: 1 bar - 10 bar
• For electrical control using PLC control or our singold impulser • Available for different voltages • Direct flow • With manual override • Easily interchangeable magnet system • Service-friendly and maintenance-free
DN: 13 mm - 40 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 80 °C
DN: 0.25 in - 2 in
Voltage: 24, 42, 110, 230 V
Temperature: -10 °C - 200 °C
... /C and pressure from 5 to 150 psi (0.3 to 10 bar) - Manual Override - Degreased Version - EEx Solenoid- Latching Coil ndumart Series SVP500 Solenoid Valves are suitable for processes ...
DN: 4 mm - 10 mm
Voltage: 10 V - 230 V
Temperature: -30 °C - 80 °C
Control valves for block assembly Nominal sizes from 4 to 10 (CETOP 2 to 5) Operating pressure up to 350 bar Flow rate 140 l/min
DN: 1 mm - 50 mm
Voltage: 220, 230, 240 V
Temperature: -10 °C - 130 °C
... Protection class: IP 65 (with connector and gasket) OPTIONS Available with body thread connection 1/8" (e.g. code RD262DVA). performance ratings remain the same as RD263DVA. Forsteam version with ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining