LEWA discharge pumps

Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W

... IX Series pumps provide a solution to a variety of applications all in one pump. Key Benefits: 1000:1 Turndown Ratio IX Series pumps use efficient Brushless DC motors for speed control. ...

Flow: 0.6 us gal/h - 6.3 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C

EZ Series electronic metering pumps offer precise chemical injection at a low cost. The compact size and simple control make them ideal for water treatment and OEM applications. Key Benefits: • Outputs ...

Flow: 4 us gal/h - 20 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C

... the E-Series metering pumps. EHE Series pumps have outputs up to 20 GPH (75 l/h) and pressure capabilities to 150 PSI (10 bar). Combining the EHE performance with a turndown ratio of 1800:1 yields one ...

Flow: 1,500 m³/h
Fluid temperature: 427 °C

The ClydeUnion Pumps CUP-BB2 is a heavy duty, horizontal, single or two stage, radially split, between bearings, double suction pump, top-top or side-side suction and discharge connections. ...

Flow: 800 m³/h
Pressure: 20 bar
Fluid temperature: -40 °C - 200 °C

The Twinro 2 screw pump is a positive displacement rotary twin screw pump designed for bulk transfer of liquids. It is a heavy duty, fixed flow transfer unit. Description The Twinro 2 screw pump ...

Flow: 1,365 m³/h
Fluid temperature: 370 °C

The ClydeUnion Pumps CUP-OH4 is an advanced design single stage, vertical in-line, centrifugal pump with exceptional flexibility and versatility to meet the requirements of a wide variety of pumping applications. ...

Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m

Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...

Flow: 140 m³/h
Pressure: 25 bar
Head: 60 m

Single-stage pumping units in compact design with nominal performances according to EN 733 / DIN 24255, where suction and discharge branch are arranged opposite to each other for direct ...

Flow: 220 m³/h
Pressure: 25 bar - 40 bar
Head: 280 m

Horizontal, self-priming centrifugal pumps of the segmental type with closed impellers and a suction stage. The suction stage is installed at discharge side. It is arranged in parallel to the last liquid ...

Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW

ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, ...

Flow: 4,200 m³/h
Pressure: 16 bar
Head: 170 m

... thrust. The casing is split axially with opposing suction and discharge flanges greatly simplifying maintenance. The inline suction and discharge nozzles are cast in the lower half casing. This design ...

Pressure: 2 bar

The L2P is a manual one shot lubricator, is of the spring discharge type. It is operated by pulling the knob which raises a piston and compresses a spring. Releasing the knob automatically discharges ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... magnetic drive pumps, offering high efficiency and durability for chemical process applications. Using larger motors for even higher output, the MDW series opens up performance potential in previously unexplored areas. High ...

Flow: 50 l/min - 510 l/min
Head: 0 m - 30 m
Power: 0.26 kW - 2.2 kW

... magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid ...

Flow: 90 l/min - 440 l/min
Pressure: 0.4, 0.28, 0.33 MPa
Head: 0 m - 24 m

... magnetic drive pumps which can tolerate abnormal operation The SMX-F is a horizontal self-priming magnetic drive pump made from fluororesin. Our original self-radiation structure enhances resistance ...

Flow: 4 m³/h - 20 m³/h
Pressure: 7, 15 bar

... Air-Operated Double-Diaphragm (AODD) Pumps have been specially designed to provide a safe operation in high-pressure applications up to 15 bar (218 psig). A typical application of these pumps is filter ...

Flow: 35 l/min
Pressure: 1 bar - 4 bar
Length: 140 mm

Pneumatic, selfpriming rotary vane pump for the transfer of petrol, with body in cast iron with anticorrosive coating and plastic rotor. Earth cable to enable an electrostatic discharge on demand. The ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 50 l/s - 70 l/s
Head: 5 m - 70 m
Fluid temperature: -25 °C - 55 °C

... uniquely-designed pump body and impeller channel，diesel engine driven self-priming pump can absorb and discharge liquid with large particles and continuous fiber impurities，just as self-priming ...

Sugar Pump - Magmo Series Product Category: MAGMO Plenty Magmo sugar pumps are designed principally to handle high viscosity abrasive sugar products, such as Molasses, Massecuite and Magma. The ellipse ...

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports ...

Pressure: 16 bar
Fluid temperature: -10 °C - 60 °C
Length: 560 mm

The pump is designed to fill tanks of PR 14 type central lubrication pumps and other pumps with plastic grease. It may be used to fill other containers with plastic grease as well. Capacity ...

Flow: 0.54 m³/h
Pressure: 25 bar
Power: 1.1 kW

... filling pump consists of a gear pump as a pumping unit, an electric motor, a coupling connecting the motor shaft with the gear pump shaft, a jacket with a rubber flange to form the drum ...

Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m

PROLAC HCP is a range of close-coupled centrifugal pumps with hygienic design, compact and highly efficient. It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump ...

Flow: 63 m³/h
Pressure: 7 bar
Fluid temperature: 120 °C

The SLRT pump is a positive displacement rotary lobe pump designed to discharge food and sanitary products from a truck cistern as it can be driven by a hydraulic motor. The pump ...

Flow: 9 m³/h - 87 m³/h
Pressure: 20, 18, 16 bar
Fluid temperature: -20 °C - 140 °C

... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be ...

Pressure: 12, 6 bar
Fluid temperature: 160 °C
Weight: 12 kg

... media. Pump tube will be driven by electric universal or air operated motors. All pump parts are made of stainless steel 316Ti. The stators are adapted to the medium and available in NBR, NBR ...

Flow: 0.6 l/h - 1,200 l/h
Pressure: 6, 12, 18, 24 bar
Power: 0.37 kW - 1.1 kW

... by the speed of the motor Stainless steel execution SS 316Ti Pump and motor directly coupled Space-saving design Thread connections on suction side G 1” and G ½” on discharge side G 1” Totally ...

Flow: 0 l/min - 100 l/min
Pressure: 7 bar
Head: 70 m

The curves and performances refer to pumps with submerged suction line and resistance-free discharge side outlet with water at 20 ° C and vary depending on the material.

Flow: 1 m³/h - 7.2 m³/h
Head: 5 m - 40 m
Power: 0.33 kW - 0.75 kW

Horizontal multi-stage close coupled pump. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top. Stages in Noryl. Applications - ...

Flow: 1 m³/h - 7.2 m³/h
Head: 5 m - 40 m
Power: 0.33 kW - 0.75 kW

Technical data Construction Horizontal multi-stage close coupled pump. Single-piece barrel casing in cast iron, with front suction port above pumps axis and radial delivery at top. Stages in Noryl. Applications - ...

Flow: 1 m³/h - 8 m³/h
Head: 14 m - 51 m
Power: 0.45 kW - 1.1 kW

... data Construction Horizontal multi-stage, self-priming, close coupled pumps. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery ...

Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar

The FKL series features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different ...

Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar

... Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps are manufactured in three sizes that last 2 to 5 stages The ...

Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar

... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics ...

Flow: 0 m³/h - 150 m³/h
Pressure: 0 bar - 48 bar

Pumps of the WANGEN KL-RS series are hopper silo pumps for conveying and dosing dewatered sewage sludge with a high-solids content (DS) of 15% to 45%. These features make silo discharge ...

Flow: 0 m³/h - 65 m³/h
Pressure: 0 bar - 48 bar

Pumps of the series KL-RL allow almost pulsation-free pumping of mediums. Depending on the medium to be pumped, the pump can be operated with heating or cooling options, and a variation using an attachable ...

Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"

Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...

Flow: 0 m³/h - 6,400 m³/h
Head: 0 m - 140 m

... Specifications: Available on a range of pumps with discharge sizes from 4″ to 30″ Withstands up to 30′ subergence Can be submerged up to two weeks Available on N, NN and NH series ...

Flow: 40,000 us gal/min
Head: 29 m - 201 m

Cornell offers a wide range of solids handling pumps, from 1.25″ though 30″ discharge size, to handle the most difficult solids applications. Cornell’s solids handling pumps can be found ...