Lincoln industrial pumps

Flow: 90 m³/h - 3,780 m³/h
Head: 15 m - 130 m
Power: 11 kW - 800 kW

... protection to ensure long and safe pump operation under abominable working conditions. 5) Especially for multifunctional small and medium scale dredging projects. 6) High-chromium alloy material, aluminum ...

Flow: 200 m³/h
Head: 30 m

... dredge pumps are mainly used as an excavator attachment taking place of a grab bucket when there is too much water, and mud and are not suitable for digging. It is driven by the excavator hydraulic system or a separate ...

Flow: 400 m³/h
Head: 40 m

The RELONG hydraulic submersible pump with agitator is a highly efficient and modular heavy-duty submersible dredge pump unit. The hydraulic dredge pump is mainly used as an excavator ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"

The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications ...

Flow: 2.4 m³/h - 45 m³/h
Pressure: 12, 6 bar
Fluid temperature: 85 °C

Kiber KS progressive cavity pumps are used to transfer products of low and high viscosity as well as products containing soft particles. They are also recommended for use with edible oils, wine, concentrates and beverages ...

KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...

... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...

Flow: 104 m³/h
Head: 36 m
Power: 7,500 W

• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...

Flow: 80 m³/h
Head: 27 m
Power: 180 W - 7,500 W

... seals • Materials PP-GF, PVDF • Height up to 65m • Engine coated corrosive EPOXI paint Type of construction • Horizontal pump with hermetic seal and magnetic coupling, with special bearing pair, suitable for dry ...

Flow: 1,000 m³/h
Pressure: 16 bar

• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...

... ,12VDC and 24VDC micro diaphragm vacuum pumps,gas pumps,water pumps,self priming liquid pumps and long lasting DC brushless motor micropumps,provides ...

Flow: 5 l/min
Pressure: -700 mbar - 2,000 mbar
Length: 30 mm

CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Uncontaminated ...

air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...

Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...

Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...

Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...

Power: 1,400 W
Length: 195 mm
Width: 195 mm

Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...

HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...

Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...

Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the power source, which can be used in various complex working conditions ...

Flow: 35 l/h
Pressure: 903 bar

The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...

Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg

WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...

Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg

Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...

Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm

... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...

Flow: 2 l/min
Length: 112 mm
Width: 37 mm

... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...

Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm

... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...

Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m

Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...

Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar

The Fristam Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps are manufactured in three sizes that last ...

Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar

When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...

Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...

... high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...