LOCTITE single-component adhesives
Working temperature: -55 °C - 200 °C
Packaging: 113, 454 ml
Parker Chomerics CHO-BOND® 1030 conductive adhesive is a one component silver-plated copper filled silicone ideal for thin bond lines and bonding silicone EMI gaskets to metal substrates. CHO-BOND® 1030 ...
NORPOL® FI-177 is a sandwich adhesisve based on a premium isophtalic polyester resin. NORPOL® FI-177 is used for filling joints from 1-20 mm between core materials without excessive heat generation. Features Based on a premium ...
Working temperature: 5 °C - 35 °C
Pattex 100% Repair Gel is a gel structured adhesive for all your small repairs in and around the house. No more sagging in vertical applications while gap filling. No more slipping parts and dripping during the application. Pattex ...
PATTEX
Working temperature: 343 °C
Permatex®s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minutes! This leak-proof, elastomeric °Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout ...
PERMATEX
Working temperature: 110 °C
... your jointing components, both in handcraft as well as in the industrial field. Compared with the customary competition, COSMO PU-100.110 e.g. offers the following properties: - very quick full hardening, also of ...
Weiss Chemie
Apollo 1603 is a single component, medium viscosity cyanoacrylate adhesive. It is suitable for general-purpose bonding, particularly providing excellent strength and speed on all rubber ...
Cyberbond
Optical Transparent GEL OPT Alpha Gel is an optical bonding material (OCA) based on silicone. It is used in displays to eliminate reflection loss and parallax caused by air gaps between LCD, cover lens and touch panel. Features Improvement ...
It is mainly an adhesive for screws, bolts, and joints. It will not harden as long as it is in contact with air, but once it enters a very small gap in metals and other materials, it hardens quickly.
THREE BOND
Working temperature: -40 °C - 120 °C
1K PU Windshield Adhesive Description: Quick thru-cure 1K Urethane for installing windshields and other stationary glass panels. Drive-away-times (cars): 1-2 hours (without and with double-sided airbags, operating ...
... Properties - Cures in Lead-Free Profile - Non-Hygroscopic - No Voiding One-Step Underfill 688 is a low surface tension, one component epoxy resin designed as a one-step no-flow underfill for flip chip, CSP, BGA ...
FiberPlast C 1800 D Ceramic adhesive for high-temperature applications FiberPlast C 1800 D permits reliable bonding or coating of fibre-based ceramic materials - such as insulation boards. The single-component ...
... especially for inert materials (e.g. stainless steel or aluminium) or large gaps Accelerates the hardening of STALOC anaerobic adhesives (threadlockers, retaining compounds, surface sealants and pipe thread sealants)
STALOC
Gap fill: 50 mm
Working temperature: -20 °C - 80 °C
Polymerization time: 10 min - 15 min
... appropriate for the filling of seams and screw holes in plasterboards. Easy to apply, can be sanded and overpainted. Does not shrink nor crack. Ready-to-use, light finishing paste Can be applied in one single ...
DL Chemicals
Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 ...
CBG Composites GmbH
UV adhesive is a curable adhesive available in acrylate or epoxy base for flexible and high strength mechanical bonding applications. UV adhesives are cured by exposing the adhesive ...
KEOL
Multi-purpose adhesive is a clear, solvent-borne adhesive that's non-toxic, solvent-free, safe for children, and washable. Multi-Purpose Adhesive features a twin application for those ...
Ningbo Hopson Chemical Industry Co., Ltd
For: wood , light trunk cloth , craftwork , plastic ect. Characteristics:Fast adhesion , exrta hight strength.. Viscosity(25℃)cps:3-5 Gap Fill(mm):≤0.05 Shelf Life(month):≥10 Seting Time(seconds):≤6.0 Temp Range(0℃):-50~80 Tensile shear ...
Anhui boli new material technology Company
Working temperature: 90 °C
Water sealing under grommets,water immersion test,butyl rubber
Henco
... recommended). • Excellent elasticity and very good adhesion strength. Curtain Rail Adhesive AST Polymer One component, high quality and professional adhesive with high adhesive ...
Akkim Yapı Kimyasalları San. ve Tic. A.Ş.
... Seaming made simple. Epoxy Modified Methacrylate Adhesive for Quartz, Natural Stone, Solid Surface, Ceramic and more… Surface Bonder XI is the latest generation of color matched adhesives ...
Integra Adhesives Inc.
DESCRIPTION The SAF range is made of patented methacrylate adhesives and shows unmatched performance in term of resistance and flexibility. These adhesives have been designed for bonding a wide range ...
AEC POLYMERS S.A.S.
The FLEX-SEAL150 unit is an epoxy adhesive developed by STAR Technology. It is specifically designed to cater applications that include shock sensitive components. In addition, the unit can also be utilized ...
STAR Technology
... and edge with masking tape (remove immediately after application). Cut the nozzle to the desired diameter. Glue is applied with a gun. For glueing applications, apply adhesive in vertical ...
Saratoga Int Sforza
... similar to glass. Exposure to a high-intensity UV light will cure these adhesives to a dry, hard surface. Our Ultrabond® UV cure adhesives are a complete line of UV curable adhesives. INDUSTRIES ...
Hernon Manufacturing
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining