- Hydraulics - Pneumatics >
- Pump >
- Vertical pump >
- Lutz
Lutz vertical pumps
Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW
... slurry and affects the pumps by increasing wear and tear. Landia has developed special materials to extend the pump's lifespan significantly in comparison with a standard pump. Landia's ...
LANDIA AS
Flow: 0 m³/h - 850 m³/h
Head: 0 m - 850 m
... is a horizontal multistage centrifugal pump. RKB/RKBF/RKBK horizontal multistage centrifugal pumps are side suction pumps with vertical delivery and diffuser type casing. ...
... clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The high efficiency and adaptability of these pumps to even the most unusual of applications, ...
... Aturia, is a vertical shaft centrifugal fire pump, suitable for extensive industrial and municipal applications. This device consists of submerged impellers placed in a series-bowl assembly at the bottom ...
Flow: 30 m³/h - 1,200 m³/h
Head: 95 m - 285 m
Power: 21.5 kW - 204.4 kW
Vertical lineshaft pumps available with flanged drive head for electric motors, with horizontal right angle gear, with overgear driven by tractor p.t.o and with vertical pulley.
Rovatti Pompe
Flow: 400 m³/h
Pressure: 48 bar
DV vertical pumps are designed to accomplish easy fluid suction from wells, cisterns, barrels and tanks. Their reduced dimensions and partial immersion design reduce the negative head. Different cone ...
Flow: 0 m³/h - 12 m³/h
Head: 90 m
Power: 1, 3 ch
... laboratories, leisure parks and marine vessels. The pump can be constructed from either stainless steel 304 or 316 and is fully WRAS approved. It can be supplied in either horizontal or vertical configuration, ...
North Ridge Pumps Ltd
Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C
... flexible handling by means of lifting bows. Discharge pumps for Fluidbag and barrels A specialty of ipp Pump Products GmbH is the progressive cavity pump FLB, which as a horizontal ...
Flow: 2 m³/h - 150 m³/h
... : 2 m³/h – 150 m³/h | 8.8 USGPM - 660 USGPM Range U is installed universally either on vertical piping or on a supply tank with direct connection to a seepex pump.
Flow: 400 m³/h - 80,000 m³/h
Head: 30 m
... drainage for low-lying area、lake area. Structural Characteristics ZL type axial flow pump is vertical structure,and is made up of pump casing and rotating parts. Pump ...
Sanlian Pump Industry Co., Ltd
Flow: 5.5 m³/h
Head: 7 m
Power: 300, 160 W
... .11414), switch-on point approx. 2,5 cm, switch-off point approx. 3 mm vertical pressure outlet 1"MPT with hose connection DN 25 integrated non-return valve puddle pump FSP 330 with ENS ...
zehnder pumpen
... the pump body, it can be installed in pools or tanks of different depths. The rotor and stator parts are inserted into the pool, and the reduction motor is located above the liquid level without contacting the medium. ...
Weifang Subtor Rotating Precision Machinery Co., Ltd.
Fluid temperature: 60 °C
Weight: 28.5, 30 kg
• Pump Type: Rotary - Gear • Flow: 1L / Rotation • Mounting: 2" MNPT Bung Adapter • Suction Tube Length: 40" Maximum • Inlet: 1-1/4" O.D. • Outlet: 1" O.D. Spout • Wetted Parts: Cast Aluminum, Plated Steel, ...
Flow: 0 m³/h - 300 m³/h
Head: 0 m - 28 m
The FROTH PUMP is of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. It has a vertical shaft configuration and comprise a hopper, with vertical ...
Shijiazhuang Sunbo Pump Co., Ltd
The (XY)SPR submerged pump is a vertical centrifugal slurry pump, suitable for conveying abrasive or corrosive material. The pump is generally immersed in a pool or pit ...
Flow: 0 m³/h - 5,000 m³/h
Pressure: 20 bar
Fluid temperature: 160 °C
... 160 ºC Maximum pressure: p up to 20 bar Speed: n 50 Hz: 1450, 960 min-1 60 Hz: 1750, 1160 min-1 Vertical shaft split case centrifugal pump, double flow radial impeller, single-stage, balanced ...
EMICA BOMBAS
Flow: 0 m³/h - 60 m³/h
Head: 0 m - 20 m
Power: 0.37 kW - 20 kW
The pump volute shall be of cast Iron as per grade FG 260 of IS 210/ISO 186 with vertical discharge port. The pumps shall have non clog semi open impeller with material of construction ...
LUBI INDUSTRIES LLP
Flow: 6 m³/h
Head: 7.5 m
Power: 0.75 ch
vertical centrifugal pump are high-performance pump for fixed installations with pump immersed directly in the tank and operated by a direct-drive electric motor (max ...
ALPHADYNAMIC PUMPS (UK) LTD
Flow: 0 m³/h - 9.6 m³/h
Head: 14 m - 74 m
Power: 0.44 kW - 0.6 kW
MULTISTAGE PUMPS MCV SCOPE OF APPLICATION: Multicellular vertical pumps. These pumps feature excellent hydraulic performance, a very low noise while running, and are ...
Flow: 2 m³/h - 29 m³/h
Head: 0 m - 13 m
Power: 0.84 kW - 1.85 kW
... outside buildings. The motor jacket cooling makes the pumps particularly suitable for submerged operation. A special thermal protection ensures that the pumps are not damaged even when running dry. The ...
JUNG PUMPEN
Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C
Food-safe pumps with a large suction chamber. Made in polished AISI 304 and/or 316 stainless steel for transferring products of low/medium viscosity.
CSF Inox Spa
Flow: 10 l/min - 400 l/min
Pressure: 8, 14 bar
Head: 14 m - 106.9 m
Stainless steel multistage vertical pumps. Pumping of clean non-loaded fluids, pressurizing system, irrigation, drinking and glycol water, water treatment, food industry, heating and air conditioning, ...
Pentax Pumps
Flow: 0 us gal/min - 55 us gal/min
Head: 0'00" ft - 35'00"
Power: 0.33, 0.5 ch
The new PC442-Series features a primary pump and the new 442-10A back-up pump system pre-assembled from the factory! It is available as a standard model or with NightEye® wireless technology.
Liberty Pumps
Flow: 30 m³/h - 500 m³/h
Power: 30 kW - 2,200 kW
Fluid temperature: 15 °C - 120 °C
QJT Mine Submersible Pump(vertical or horizontal, large flow), is a new water lifting equipment developed by Shanghai Weihu Pump Co., Ltd. It is widely used to draw water from rivers ...
Shanghai Weihu Pump Industry
Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...
Franklin Electric
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining